aws_sdk_s3control::types

Struct S3CopyObjectOperation

Source 
#[non_exhaustive]
pub struct S3CopyObjectOperation {
Show 18 fields
    pub target_resource: Option<String>,
    pub canned_access_control_list: Option<S3CannedAccessControlList>,
    pub access_control_grants: Option<Vec<S3Grant>>,
    pub metadata_directive: Option<S3MetadataDirective>,
    pub modified_since_constraint: Option<DateTime>,
    pub new_object_metadata: Option<S3ObjectMetadata>,
    pub new_object_tagging: Option<Vec<S3Tag>>,
    pub redirect_location: Option<String>,
    pub requester_pays: bool,
    pub storage_class: Option<S3StorageClass>,
    pub un_modified_since_constraint: Option<DateTime>,
    pub sse_aws_kms_key_id: Option<String>,
    pub target_key_prefix: Option<String>,
    pub object_lock_legal_hold_status: Option<S3ObjectLockLegalHoldStatus>,
    pub object_lock_mode: Option<S3ObjectLockMode>,
    pub object_lock_retain_until_date: Option<DateTime>,
    pub bucket_key_enabled: bool,
    pub checksum_algorithm: Option<S3ChecksumAlgorithm>,

}
Expand description

Contains the configuration parameters for a PUT Copy object operation. S3 Batch Operations passes every object to the underlying CopyObject API operation. For more information about the parameters for this operation, see CopyObject.

Fields (Non-exhaustive)§

This struct is marked as non-exhaustive
Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.
§target_resource: Option<String>

Specifies the destination bucket Amazon Resource Name (ARN) for the batch copy operation.

  • General purpose buckets - For example, to copy objects to a general purpose bucket named destinationBucket, set the TargetResource property to arn:aws:s3:::destinationBucket.

  • Directory buckets - For example, to copy objects to a directory bucket named destinationBucket in the Availability Zone identified by the AZ ID usw2-az1, set the TargetResource property to arn:aws:s3express:region:account_id:/bucket/destination_bucket_base_name--usw2-az1--x-s3. A directory bucket as a destination bucket can be in Availability Zone or Local Zone.

    Copying objects across different Amazon Web Services Regions isn't supported when the source or destination bucket is in Amazon Web Services Local Zones. The source and destination buckets must have the same parent Amazon Web Services Region. Otherwise, you get an HTTP 400 Bad Request error with the error code InvalidRequest.

§canned_access_control_list: Option<S3CannedAccessControlList>

This functionality is not supported by directory buckets.

§access_control_grants: Option<Vec<S3Grant>>

This functionality is not supported by directory buckets.

§metadata_directive: Option<S3MetadataDirective>

§modified_since_constraint: Option<DateTime>

§new_object_metadata: Option<S3ObjectMetadata>

If you don't provide this parameter, Amazon S3 copies all the metadata from the original objects. If you specify an empty set, the new objects will have no tags. Otherwise, Amazon S3 assigns the supplied tags to the new objects.

§new_object_tagging: Option<Vec<S3Tag>>

Specifies a list of tags to add to the destination objects after they are copied. If NewObjectTagging is not specified, the tags of the source objects are copied to destination objects by default.

Directory buckets - Tags aren't supported by directory buckets. If your source objects have tags and your destination bucket is a directory bucket, specify an empty tag set in the NewObjectTagging field to prevent copying the source object tags to the directory bucket.

§redirect_location: Option<String>

If the destination bucket is configured as a website, specifies an optional metadata property for website redirects, x-amz-website-redirect-location. Allows webpage redirects if the object copy is accessed through a website endpoint.

This functionality is not supported by directory buckets.

§requester_pays: bool

This functionality is not supported by directory buckets.

§storage_class: Option<S3StorageClass>

Specify the storage class for the destination objects in a Copy operation.

Directory buckets - This functionality is not supported by directory buckets.

§un_modified_since_constraint: Option<DateTime>

§sse_aws_kms_key_id: Option<String>

Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for object encryption. If the KMS key doesn't exist in the same account that's issuing the command, you must use the full Key ARN not the Key ID.

Directory buckets - If you specify SSEAlgorithm with KMS, you must specify the SSEAwsKmsKeyId parameter with the ID (Key ID or Key ARN) of the KMS symmetric encryption customer managed key to use. Otherwise, you get an HTTP 400 Bad Request error. The key alias format of the KMS key isn't supported. To encrypt new object copies in a directory bucket with SSE-KMS, you must specify SSE-KMS as the directory bucket's default encryption configuration with a KMS key (specifically, a customer managed key). The Amazon Web Services managed key (aws/s3) isn't supported. Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. After you specify a customer managed key for SSE-KMS as the bucket default encryption, you can't override the customer managed key for the bucket's SSE-KMS configuration. Then, when you specify server-side encryption settings for new object copies with SSE-KMS, you must make sure the encryption key is the same customer managed key that you specified for the directory bucket's default encryption configuration.

§target_key_prefix: Option<String>

Specifies the folder prefix that you want the objects to be copied into. For example, to copy objects into a folder named Folder1 in the destination bucket, set the TargetKeyPrefix property to Folder1.

§object_lock_legal_hold_status: Option<S3ObjectLockLegalHoldStatus>

The legal hold status to be applied to all objects in the Batch Operations job.

This functionality is not supported by directory buckets.

§object_lock_mode: Option<S3ObjectLockMode>

The retention mode to be applied to all objects in the Batch Operations job.

This functionality is not supported by directory buckets.

§object_lock_retain_until_date: Option<DateTime>

The date when the applied object retention configuration expires on all objects in the Batch Operations job.

This functionality is not supported by directory buckets.

§bucket_key_enabled: bool

Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Amazon Web Services KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.

Specifying this header with an Copy action doesn’t affect bucket-level settings for S3 Bucket Key.

Directory buckets - S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through the Copy operation in Batch Operations. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.

§checksum_algorithm: Option<S3ChecksumAlgorithm>

Indicates the algorithm that you want Amazon S3 to use to create the checksum. For more information, see Checking object integrity in the Amazon S3 User Guide.

Implementations§

Source§

impl S3CopyObjectOperation

Source

pub fn target_resource(&self) -> Option<&str>

Specifies the destination bucket Amazon Resource Name (ARN) for the batch copy operation.

  • General purpose buckets - For example, to copy objects to a general purpose bucket named destinationBucket, set the TargetResource property to arn:aws:s3:::destinationBucket.

  • Directory buckets - For example, to copy objects to a directory bucket named destinationBucket in the Availability Zone identified by the AZ ID usw2-az1, set the TargetResource property to arn:aws:s3express:region:account_id:/bucket/destination_bucket_base_name--usw2-az1--x-s3. A directory bucket as a destination bucket can be in Availability Zone or Local Zone.

    Copying objects across different Amazon Web Services Regions isn't supported when the source or destination bucket is in Amazon Web Services Local Zones. The source and destination buckets must have the same parent Amazon Web Services Region. Otherwise, you get an HTTP 400 Bad Request error with the error code InvalidRequest.

Source

pub fn canned_access_control_list(&self) -> Option<&S3CannedAccessControlList>

This functionality is not supported by directory buckets.

Source

pub fn access_control_grants(&self) -> &[S3Grant]

This functionality is not supported by directory buckets.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .access_control_grants.is_none().

Source

pub fn metadata_directive(&self) -> Option<&S3MetadataDirective>

Source

pub fn modified_since_constraint(&self) -> Option<&DateTime>

Source

pub fn new_object_metadata(&self) -> Option<&S3ObjectMetadata>

If you don't provide this parameter, Amazon S3 copies all the metadata from the original objects. If you specify an empty set, the new objects will have no tags. Otherwise, Amazon S3 assigns the supplied tags to the new objects.

Source

pub fn new_object_tagging(&self) -> &[S3Tag]

Specifies a list of tags to add to the destination objects after they are copied. If NewObjectTagging is not specified, the tags of the source objects are copied to destination objects by default.

Directory buckets - Tags aren't supported by directory buckets. If your source objects have tags and your destination bucket is a directory bucket, specify an empty tag set in the NewObjectTagging field to prevent copying the source object tags to the directory bucket.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .new_object_tagging.is_none().

Source

pub fn redirect_location(&self) -> Option<&str>

If the destination bucket is configured as a website, specifies an optional metadata property for website redirects, x-amz-website-redirect-location. Allows webpage redirects if the object copy is accessed through a website endpoint.

This functionality is not supported by directory buckets.

Source

pub fn requester_pays(&self) -> bool

This functionality is not supported by directory buckets.

Source

pub fn storage_class(&self) -> Option<&S3StorageClass>

Specify the storage class for the destination objects in a Copy operation.

Directory buckets - This functionality is not supported by directory buckets.

Source

pub fn un_modified_since_constraint(&self) -> Option<&DateTime>

Source

pub fn sse_aws_kms_key_id(&self) -> Option<&str>

Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for object encryption. If the KMS key doesn't exist in the same account that's issuing the command, you must use the full Key ARN not the Key ID.

Directory buckets - If you specify SSEAlgorithm with KMS, you must specify the SSEAwsKmsKeyId parameter with the ID (Key ID or Key ARN) of the KMS symmetric encryption customer managed key to use. Otherwise, you get an HTTP 400 Bad Request error. The key alias format of the KMS key isn't supported. To encrypt new object copies in a directory bucket with SSE-KMS, you must specify SSE-KMS as the directory bucket's default encryption configuration with a KMS key (specifically, a customer managed key). The Amazon Web Services managed key (aws/s3) isn't supported. Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. After you specify a customer managed key for SSE-KMS as the bucket default encryption, you can't override the customer managed key for the bucket's SSE-KMS configuration. Then, when you specify server-side encryption settings for new object copies with SSE-KMS, you must make sure the encryption key is the same customer managed key that you specified for the directory bucket's default encryption configuration.

Source

pub fn target_key_prefix(&self) -> Option<&str>

Specifies the folder prefix that you want the objects to be copied into. For example, to copy objects into a folder named Folder1 in the destination bucket, set the TargetKeyPrefix property to Folder1.

The legal hold status to be applied to all objects in the Batch Operations job.

This functionality is not supported by directory buckets.

Source

pub fn object_lock_mode(&self) -> Option<&S3ObjectLockMode>

The retention mode to be applied to all objects in the Batch Operations job.

This functionality is not supported by directory buckets.

Source

pub fn object_lock_retain_until_date(&self) -> Option<&DateTime>

The date when the applied object retention configuration expires on all objects in the Batch Operations job.

This functionality is not supported by directory buckets.

Source

pub fn bucket_key_enabled(&self) -> bool

Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Amazon Web Services KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.

Specifying this header with an Copy action doesn’t affect bucket-level settings for S3 Bucket Key.

Directory buckets - S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through the Copy operation in Batch Operations. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.

Source

pub fn checksum_algorithm(&self) -> Option<&S3ChecksumAlgorithm>

Indicates the algorithm that you want Amazon S3 to use to create the checksum. For more information, see Checking object integrity in the Amazon S3 User Guide.

Source§

impl S3CopyObjectOperation

Source

pub fn builder() -> S3CopyObjectOperationBuilder

Creates a new builder-style object to manufacture S3CopyObjectOperation.

Trait Implementations§

Source§

impl Clone for S3CopyObjectOperation

Source§

fn clone(&self) -> S3CopyObjectOperation

Returns a duplicate of the value. Read more
1.0.0 · Source§

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for S3CopyObjectOperation

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl PartialEq for S3CopyObjectOperation

Source§

fn eq(&self, other: &S3CopyObjectOperation) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for S3CopyObjectOperation

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,