Struct CreateResolverEndpointInput

#[non_exhaustive]
pub struct CreateResolverEndpointInput {
    pub creator_request_id: Option<String>,
    pub name: Option<String>,
    pub security_group_ids: Option<Vec<String>>,
    pub direction: Option<ResolverEndpointDirection>,
    pub ip_addresses: Option<Vec<IpAddressRequest>>,
    pub outpost_arn: Option<String>,
    pub preferred_instance_type: Option<String>,
    pub tags: Option<Vec<Tag>>,
    pub resolver_endpoint_type: Option<ResolverEndpointType>,
    pub protocols: Option<Vec<Protocol>>,
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

creator_request_id: Option<String>

A unique string that identifies the request and that allows failed requests to be retried without the risk of running the operation twice. CreatorRequestId can be any unique string, for example, a date/time stamp.

name: Option<String>

A friendly name that lets you easily find a configuration in the Resolver dashboard in the Route 53 console.

security_group_ids: Option<Vec<String>>

The ID of one or more security groups that you want to use to control access to this VPC. The security group that you specify must include one or more inbound rules (for inbound Resolver endpoints) or outbound rules (for outbound Resolver endpoints). Inbound and outbound rules must allow TCP and UDP access. For inbound access, open port 53. For outbound access, open the port that you're using for DNS queries on your network.

Some security group rules will cause your connection to be tracked. For outbound resolver endpoint, it can potentially impact the maximum queries per second from outbound endpoint to your target name server. For inbound resolver endpoint, it can bring down the overall maximum queries per second per IP address to as low as 1500. To avoid connection tracking caused by security group, see Untracked connections.

direction: Option<ResolverEndpointDirection>

Specify the applicable value:

• INBOUND: Resolver forwards DNS queries to the DNS service for a VPC from your network.

• OUTBOUND: Resolver forwards DNS queries from the DNS service for a VPC to your network.

• INBOUND_DELEGATION: Resolver delegates queries to Route 53 private hosted zones from your network.

ip_addresses: Option<Vec<IpAddressRequest>>

The subnets and IP addresses in your VPC that DNS queries originate from (for outbound endpoints) or that you forward DNS queries to (for inbound endpoints). The subnet ID uniquely identifies a VPC.

Even though the minimum is 1, Route 53 requires that you create at least two.

outpost_arn: Option<String>

The Amazon Resource Name (ARN) of the Outpost. If you specify this, you must also specify a value for the PreferredInstanceType.

preferred_instance_type: Option<String>

The instance type. If you specify this, you must also specify a value for the OutpostArn.

tags: Option<Vec<Tag>>

A list of the tag keys and values that you want to associate with the endpoint.

resolver_endpoint_type: Option<ResolverEndpointType>

For the endpoint type you can choose either IPv4, IPv6, or dual-stack. A dual-stack endpoint means that it will resolve via both IPv4 and IPv6. This endpoint type is applied to all IP addresses.

protocols: Option<Vec<Protocol>>

The protocols you want to use for the endpoint. DoH-FIPS is applicable for default inbound endpoints only.

For a default inbound endpoint you can apply the protocols as follows:

• Do53 and DoH in combination.

• Do53 and DoH-FIPS in combination.

• Do53 alone.

• DoH alone.

• DoH-FIPS alone.

• None, which is treated as Do53.

For a delegation inbound endpoint you can use Do53 only.

For an outbound endpoint you can apply the protocols as follows:

• Do53 and DoH in combination.

• Do53 alone.

• DoH alone.

• None, which is treated as Do53.

Implementations

impl CreateResolverEndpointInput

pub fn creator_request_id(&self) -> Option<&str>

A unique string that identifies the request and that allows failed requests to be retried without the risk of running the operation twice. CreatorRequestId can be any unique string, for example, a date/time stamp.

pub fn name(&self) -> Option<&str>

A friendly name that lets you easily find a configuration in the Resolver dashboard in the Route 53 console.

pub fn security_group_ids(&self) -> &[String]

The ID of one or more security groups that you want to use to control access to this VPC. The security group that you specify must include one or more inbound rules (for inbound Resolver endpoints) or outbound rules (for outbound Resolver endpoints). Inbound and outbound rules must allow TCP and UDP access. For inbound access, open port 53. For outbound access, open the port that you're using for DNS queries on your network.

Some security group rules will cause your connection to be tracked. For outbound resolver endpoint, it can potentially impact the maximum queries per second from outbound endpoint to your target name server. For inbound resolver endpoint, it can bring down the overall maximum queries per second per IP address to as low as 1500. To avoid connection tracking caused by security group, see Untracked connections.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .security_group_ids.is_none().

pub fn direction(&self) -> Option<&ResolverEndpointDirection>

Specify the applicable value:

• INBOUND: Resolver forwards DNS queries to the DNS service for a VPC from your network.

• OUTBOUND: Resolver forwards DNS queries from the DNS service for a VPC to your network.

• INBOUND_DELEGATION: Resolver delegates queries to Route 53 private hosted zones from your network.

pub fn ip_addresses(&self) -> &[IpAddressRequest]

The subnets and IP addresses in your VPC that DNS queries originate from (for outbound endpoints) or that you forward DNS queries to (for inbound endpoints). The subnet ID uniquely identifies a VPC.

Even though the minimum is 1, Route 53 requires that you create at least two.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .ip_addresses.is_none().

pub fn outpost_arn(&self) -> Option<&str>

The Amazon Resource Name (ARN) of the Outpost. If you specify this, you must also specify a value for the PreferredInstanceType.

pub fn preferred_instance_type(&self) -> Option<&str>

The instance type. If you specify this, you must also specify a value for the OutpostArn.

pub fn tags(&self) -> &[Tag]

A list of the tag keys and values that you want to associate with the endpoint.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tags.is_none().

pub fn resolver_endpoint_type(&self) -> Option<&ResolverEndpointType>

For the endpoint type you can choose either IPv4, IPv6, or dual-stack. A dual-stack endpoint means that it will resolve via both IPv4 and IPv6. This endpoint type is applied to all IP addresses.

pub fn protocols(&self) -> &[Protocol]

The protocols you want to use for the endpoint. DoH-FIPS is applicable for default inbound endpoints only.

For a default inbound endpoint you can apply the protocols as follows:

• Do53 and DoH in combination.

• Do53 and DoH-FIPS in combination.

• Do53 alone.

• DoH alone.

• DoH-FIPS alone.

• None, which is treated as Do53.

For a delegation inbound endpoint you can use Do53 only.

For an outbound endpoint you can apply the protocols as follows:

• Do53 and DoH in combination.

• Do53 alone.

• DoH alone.

• None, which is treated as Do53.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .protocols.is_none().

impl CreateResolverEndpointInput

pub fn builder() -> CreateResolverEndpointInputBuilder

Creates a new builder-style object to manufacture CreateResolverEndpointInput.

Trait Implementations

impl Clone for CreateResolverEndpointInput

fn clone(&self) -> CreateResolverEndpointInput

Returns a duplicate of the value.

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateResolverEndpointInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for CreateResolverEndpointInput

fn eq(&self, other: &CreateResolverEndpointInput) -> bool

Tests for self and other values to be equal, and is used by ==.

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for CreateResolverEndpointInput