pub struct UpdateRoutingControlStatesFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to UpdateRoutingControlStates.
Set multiple routing control states. You can set the value for each state to be ON or OFF. When the state is ON, traffic flows to a cell. When it's OFF, traffic does not flow.
With Route 53 ARC, you can add safety rules for routing controls, which are safeguards for routing control state updates that help prevent unexpected outcomes, like fail open traffic routing. However, there are scenarios when you might want to bypass the routing control safeguards that are enforced with safety rules that you've configured. For example, you might want to fail over quickly for disaster recovery, and one or more safety rules might be unexpectedly preventing you from updating a routing control state to reroute traffic. In a "break glass" scenario like this, you can override one or more safety rules to change a routing control state and fail over your application.
The SafetyRulesToOverride property enables you override one or more safety rules and update routing control states. For more information, see Override safety rules to reroute traffic in the Amazon Route 53 Application Recovery Controller Developer Guide.
You must specify Regional endpoints when you work with API cluster operations to get or update routing control states in Route 53 ARC.
To see a code example for getting a routing control state, including accessing Regional cluster endpoints in sequence, see API examples in the Amazon Route 53 Application Recovery Controller Developer Guide.
Implementations§
Source§impl UpdateRoutingControlStatesFluentBuilder
impl UpdateRoutingControlStatesFluentBuilder
Sourcepub fn as_input(&self) -> &UpdateRoutingControlStatesInputBuilder
pub fn as_input(&self) -> &UpdateRoutingControlStatesInputBuilder
Access the UpdateRoutingControlStates as a reference.
Sourcepub async fn send(
self,
) -> Result<UpdateRoutingControlStatesOutput, SdkError<UpdateRoutingControlStatesError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateRoutingControlStatesOutput, SdkError<UpdateRoutingControlStatesError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateRoutingControlStatesOutput, UpdateRoutingControlStatesError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateRoutingControlStatesOutput, UpdateRoutingControlStatesError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn update_routing_control_state_entries(
self,
input: UpdateRoutingControlStateEntry,
) -> Self
pub fn update_routing_control_state_entries( self, input: UpdateRoutingControlStateEntry, ) -> Self
Appends an item to UpdateRoutingControlStateEntries.
To override the contents of this collection use set_update_routing_control_state_entries.
A set of routing control entries that you want to update.
Sourcepub fn set_update_routing_control_state_entries(
self,
input: Option<Vec<UpdateRoutingControlStateEntry>>,
) -> Self
pub fn set_update_routing_control_state_entries( self, input: Option<Vec<UpdateRoutingControlStateEntry>>, ) -> Self
A set of routing control entries that you want to update.
Sourcepub fn get_update_routing_control_state_entries(
&self,
) -> &Option<Vec<UpdateRoutingControlStateEntry>>
pub fn get_update_routing_control_state_entries( &self, ) -> &Option<Vec<UpdateRoutingControlStateEntry>>
A set of routing control entries that you want to update.
Sourcepub fn safety_rules_to_override(self, input: impl Into<String>) -> Self
pub fn safety_rules_to_override(self, input: impl Into<String>) -> Self
Appends an item to SafetyRulesToOverride.
To override the contents of this collection use set_safety_rules_to_override.
The Amazon Resource Names (ARNs) for the safety rules that you want to override when you're updating routing control states. You can override one safety rule or multiple safety rules by including one or more ARNs, separated by commas.
For more information, see Override safety rules to reroute traffic in the Amazon Route 53 Application Recovery Controller Developer Guide.
Sourcepub fn set_safety_rules_to_override(self, input: Option<Vec<String>>) -> Self
pub fn set_safety_rules_to_override(self, input: Option<Vec<String>>) -> Self
The Amazon Resource Names (ARNs) for the safety rules that you want to override when you're updating routing control states. You can override one safety rule or multiple safety rules by including one or more ARNs, separated by commas.
For more information, see Override safety rules to reroute traffic in the Amazon Route 53 Application Recovery Controller Developer Guide.
Sourcepub fn get_safety_rules_to_override(&self) -> &Option<Vec<String>>
pub fn get_safety_rules_to_override(&self) -> &Option<Vec<String>>
The Amazon Resource Names (ARNs) for the safety rules that you want to override when you're updating routing control states. You can override one safety rule or multiple safety rules by including one or more ARNs, separated by commas.
For more information, see Override safety rules to reroute traffic in the Amazon Route 53 Application Recovery Controller Developer Guide.
Trait Implementations§
Source§impl Clone for UpdateRoutingControlStatesFluentBuilder
impl Clone for UpdateRoutingControlStatesFluentBuilder
Source§fn clone(&self) -> UpdateRoutingControlStatesFluentBuilder
fn clone(&self) -> UpdateRoutingControlStatesFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for UpdateRoutingControlStatesFluentBuilder
impl !RefUnwindSafe for UpdateRoutingControlStatesFluentBuilder
impl Send for UpdateRoutingControlStatesFluentBuilder
impl Sync for UpdateRoutingControlStatesFluentBuilder
impl Unpin for UpdateRoutingControlStatesFluentBuilder
impl !UnwindSafe for UpdateRoutingControlStatesFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);