#[non_exhaustive]pub struct GetPersonTrackingOutput {
pub job_status: Option<VideoJobStatus>,
pub status_message: Option<String>,
pub video_metadata: Option<VideoMetadata>,
pub next_token: Option<String>,
pub persons: Option<Vec<PersonDetection>>,
pub job_id: Option<String>,
pub video: Option<Video>,
pub job_tag: Option<String>,
/* private fields */
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.job_status: Option<VideoJobStatus>
The current status of the person tracking job.
status_message: Option<String>
If the job fails, StatusMessage
provides a descriptive error message.
video_metadata: Option<VideoMetadata>
Information about a video that Amazon Rekognition Video analyzed. Videometadata
is returned in every page of paginated responses from a Amazon Rekognition Video operation.
next_token: Option<String>
If the response is truncated, Amazon Rekognition Video returns this token that you can use in the subsequent request to retrieve the next set of persons.
persons: Option<Vec<PersonDetection>>
An array of the persons detected in the video and the time(s) their path was tracked throughout the video. An array element will exist for each time a person's path is tracked.
job_id: Option<String>
Job identifier for the person tracking operation for which you want to obtain results. The job identifer is returned by an initial call to StartPersonTracking.
video: Option<Video>
Video file stored in an Amazon S3 bucket. Amazon Rekognition video start operations such as StartLabelDetection
use Video
to specify a video for analysis. The supported file formats are .mp4, .mov and .avi.
job_tag: Option<String>
A job identifier specified in the call to StartCelebrityRecognition and returned in the job completion notification sent to your Amazon Simple Notification Service topic.
Implementations§
Source§impl GetPersonTrackingOutput
impl GetPersonTrackingOutput
Sourcepub fn job_status(&self) -> Option<&VideoJobStatus>
pub fn job_status(&self) -> Option<&VideoJobStatus>
The current status of the person tracking job.
Sourcepub fn status_message(&self) -> Option<&str>
pub fn status_message(&self) -> Option<&str>
If the job fails, StatusMessage
provides a descriptive error message.
Sourcepub fn video_metadata(&self) -> Option<&VideoMetadata>
pub fn video_metadata(&self) -> Option<&VideoMetadata>
Information about a video that Amazon Rekognition Video analyzed. Videometadata
is returned in every page of paginated responses from a Amazon Rekognition Video operation.
Sourcepub fn next_token(&self) -> Option<&str>
pub fn next_token(&self) -> Option<&str>
If the response is truncated, Amazon Rekognition Video returns this token that you can use in the subsequent request to retrieve the next set of persons.
Sourcepub fn persons(&self) -> &[PersonDetection]
pub fn persons(&self) -> &[PersonDetection]
An array of the persons detected in the video and the time(s) their path was tracked throughout the video. An array element will exist for each time a person's path is tracked.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .persons.is_none()
.
Sourcepub fn job_id(&self) -> Option<&str>
pub fn job_id(&self) -> Option<&str>
Job identifier for the person tracking operation for which you want to obtain results. The job identifer is returned by an initial call to StartPersonTracking.
Source§impl GetPersonTrackingOutput
impl GetPersonTrackingOutput
Sourcepub fn builder() -> GetPersonTrackingOutputBuilder
pub fn builder() -> GetPersonTrackingOutputBuilder
Creates a new builder-style object to manufacture GetPersonTrackingOutput
.
Trait Implementations§
Source§impl Clone for GetPersonTrackingOutput
impl Clone for GetPersonTrackingOutput
Source§fn clone(&self) -> GetPersonTrackingOutput
fn clone(&self) -> GetPersonTrackingOutput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for GetPersonTrackingOutput
impl Debug for GetPersonTrackingOutput
Source§impl PartialEq for GetPersonTrackingOutput
impl PartialEq for GetPersonTrackingOutput
Source§impl RequestId for GetPersonTrackingOutput
impl RequestId for GetPersonTrackingOutput
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None
if the service could not be reached.impl StructuralPartialEq for GetPersonTrackingOutput
Auto Trait Implementations§
impl Freeze for GetPersonTrackingOutput
impl RefUnwindSafe for GetPersonTrackingOutput
impl Send for GetPersonTrackingOutput
impl Sync for GetPersonTrackingOutput
impl Unpin for GetPersonTrackingOutput
impl UnwindSafe for GetPersonTrackingOutput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);