aws_sdk_redshift::operation::modify_cluster::builders

Struct ModifyClusterInputBuilder

Source 
#[non_exhaustive]
pub struct ModifyClusterInputBuilder { /* private fields */ }
Expand description

A builder for ModifyClusterInput.

Implementations§

Source§

impl ModifyClusterInputBuilder

Source

pub fn cluster_identifier(self, input: impl Into<String>) -> Self

The unique identifier of the cluster to be modified.

Example: examplecluster

This field is required.
Source

pub fn set_cluster_identifier(self, input: Option<String>) -> Self

The unique identifier of the cluster to be modified.

Example: examplecluster

Source

pub fn get_cluster_identifier(&self) -> &Option<String>

The unique identifier of the cluster to be modified.

Example: examplecluster

Source

pub fn cluster_type(self, input: impl Into<String>) -> Self

The new cluster type.

When you submit your cluster resize request, your existing cluster goes into a read-only mode. After Amazon Redshift provisions a new cluster based on your resize requirements, there will be outage for a period while the old cluster is deleted and your connection is switched to the new cluster. You can use DescribeResize to track the progress of the resize request.

Valid Values: multi-node | single-node

Source

pub fn set_cluster_type(self, input: Option<String>) -> Self

The new cluster type.

When you submit your cluster resize request, your existing cluster goes into a read-only mode. After Amazon Redshift provisions a new cluster based on your resize requirements, there will be outage for a period while the old cluster is deleted and your connection is switched to the new cluster. You can use DescribeResize to track the progress of the resize request.

Valid Values: multi-node | single-node

Source

pub fn get_cluster_type(&self) -> &Option<String>

The new cluster type.

When you submit your cluster resize request, your existing cluster goes into a read-only mode. After Amazon Redshift provisions a new cluster based on your resize requirements, there will be outage for a period while the old cluster is deleted and your connection is switched to the new cluster. You can use DescribeResize to track the progress of the resize request.

Valid Values: multi-node | single-node

Source

pub fn node_type(self, input: impl Into<String>) -> Self

The new node type of the cluster. If you specify a new node type, you must also specify the number of nodes parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: dc2.large | dc2.8xlarge | ra3.large | ra3.xlplus | ra3.4xlarge | ra3.16xlarge

Source

pub fn set_node_type(self, input: Option<String>) -> Self

The new node type of the cluster. If you specify a new node type, you must also specify the number of nodes parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: dc2.large | dc2.8xlarge | ra3.large | ra3.xlplus | ra3.4xlarge | ra3.16xlarge

Source

pub fn get_node_type(&self) -> &Option<String>

The new node type of the cluster. If you specify a new node type, you must also specify the number of nodes parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: dc2.large | dc2.8xlarge | ra3.large | ra3.xlplus | ra3.4xlarge | ra3.16xlarge

Source

pub fn number_of_nodes(self, input: i32) -> Self

The new number of nodes of the cluster. If you specify a new number of nodes, you must also specify the node type parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: Integer greater than 0.

Source

pub fn set_number_of_nodes(self, input: Option<i32>) -> Self

The new number of nodes of the cluster. If you specify a new number of nodes, you must also specify the node type parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: Integer greater than 0.

Source

pub fn get_number_of_nodes(&self) -> &Option<i32>

The new number of nodes of the cluster. If you specify a new number of nodes, you must also specify the node type parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: Integer greater than 0.

Source

pub fn cluster_security_groups(self, input: impl Into<String>) -> Self

Appends an item to cluster_security_groups.

To override the contents of this collection use set_cluster_security_groups.

A list of cluster security groups to be authorized on this cluster. This change is asynchronously applied as soon as possible.

Security groups currently associated with the cluster, and not in the list of groups to apply, will be revoked from the cluster.

Constraints:

  • Must be 1 to 255 alphanumeric characters or hyphens

  • First character must be a letter

  • Cannot end with a hyphen or contain two consecutive hyphens

Source

pub fn set_cluster_security_groups(self, input: Option<Vec<String>>) -> Self

A list of cluster security groups to be authorized on this cluster. This change is asynchronously applied as soon as possible.

Security groups currently associated with the cluster, and not in the list of groups to apply, will be revoked from the cluster.

Constraints:

  • Must be 1 to 255 alphanumeric characters or hyphens

  • First character must be a letter

  • Cannot end with a hyphen or contain two consecutive hyphens

Source

pub fn get_cluster_security_groups(&self) -> &Option<Vec<String>>

A list of cluster security groups to be authorized on this cluster. This change is asynchronously applied as soon as possible.

Security groups currently associated with the cluster, and not in the list of groups to apply, will be revoked from the cluster.

Constraints:

  • Must be 1 to 255 alphanumeric characters or hyphens

  • First character must be a letter

  • Cannot end with a hyphen or contain two consecutive hyphens

Source

pub fn vpc_security_group_ids(self, input: impl Into<String>) -> Self

Appends an item to vpc_security_group_ids.

To override the contents of this collection use set_vpc_security_group_ids.

A list of virtual private cloud (VPC) security groups to be associated with the cluster. This change is asynchronously applied as soon as possible.

Source

pub fn set_vpc_security_group_ids(self, input: Option<Vec<String>>) -> Self

A list of virtual private cloud (VPC) security groups to be associated with the cluster. This change is asynchronously applied as soon as possible.

Source

pub fn get_vpc_security_group_ids(&self) -> &Option<Vec<String>>

A list of virtual private cloud (VPC) security groups to be associated with the cluster. This change is asynchronously applied as soon as possible.

Source

pub fn master_user_password(self, input: impl Into<String>) -> Self

The new password for the cluster admin user. This change is asynchronously applied as soon as possible. Between the time of the request and the completion of the request, the MasterUserPassword element exists in the PendingModifiedValues element of the operation response.

You can't use MasterUserPassword if ManageMasterPassword is true.

Operations never return the password, so this operation provides a way to regain access to the admin user account for a cluster if the password is lost.

Default: Uses existing setting.

Constraints:

  • Must be between 8 and 64 characters in length.

  • Must contain at least one uppercase letter.

  • Must contain at least one lowercase letter.

  • Must contain one number.

  • Can be any printable ASCII character (ASCII code 33-126) except ' (single quote), " (double quote), \, /, or @.

Source

pub fn set_master_user_password(self, input: Option<String>) -> Self

The new password for the cluster admin user. This change is asynchronously applied as soon as possible. Between the time of the request and the completion of the request, the MasterUserPassword element exists in the PendingModifiedValues element of the operation response.

You can't use MasterUserPassword if ManageMasterPassword is true.

Operations never return the password, so this operation provides a way to regain access to the admin user account for a cluster if the password is lost.

Default: Uses existing setting.

Constraints:

  • Must be between 8 and 64 characters in length.

  • Must contain at least one uppercase letter.

  • Must contain at least one lowercase letter.

  • Must contain one number.

  • Can be any printable ASCII character (ASCII code 33-126) except ' (single quote), " (double quote), \, /, or @.

Source

pub fn get_master_user_password(&self) -> &Option<String>

The new password for the cluster admin user. This change is asynchronously applied as soon as possible. Between the time of the request and the completion of the request, the MasterUserPassword element exists in the PendingModifiedValues element of the operation response.

You can't use MasterUserPassword if ManageMasterPassword is true.

Operations never return the password, so this operation provides a way to regain access to the admin user account for a cluster if the password is lost.

Default: Uses existing setting.

Constraints:

  • Must be between 8 and 64 characters in length.

  • Must contain at least one uppercase letter.

  • Must contain at least one lowercase letter.

  • Must contain one number.

  • Can be any printable ASCII character (ASCII code 33-126) except ' (single quote), " (double quote), \, /, or @.

Source

pub fn cluster_parameter_group_name(self, input: impl Into<String>) -> Self

The name of the cluster parameter group to apply to this cluster. This change is applied only after the cluster is rebooted. To reboot a cluster use RebootCluster.

Default: Uses existing setting.

Constraints: The cluster parameter group must be in the same parameter group family that matches the cluster version.

Source

pub fn set_cluster_parameter_group_name(self, input: Option<String>) -> Self

The name of the cluster parameter group to apply to this cluster. This change is applied only after the cluster is rebooted. To reboot a cluster use RebootCluster.

Default: Uses existing setting.

Constraints: The cluster parameter group must be in the same parameter group family that matches the cluster version.

Source

pub fn get_cluster_parameter_group_name(&self) -> &Option<String>

The name of the cluster parameter group to apply to this cluster. This change is applied only after the cluster is rebooted. To reboot a cluster use RebootCluster.

Default: Uses existing setting.

Constraints: The cluster parameter group must be in the same parameter group family that matches the cluster version.

Source

pub fn automated_snapshot_retention_period(self, input: i32) -> Self

The number of days that automated snapshots are retained. If the value is 0, automated snapshots are disabled. Even if automated snapshots are disabled, you can still create manual snapshots when you want with CreateClusterSnapshot.

If you decrease the automated snapshot retention period from its current value, existing automated snapshots that fall outside of the new retention period will be immediately deleted.

You can't disable automated snapshots for RA3 node types. Set the automated retention period from 1-35 days.

Default: Uses existing setting.

Constraints: Must be a value from 0 to 35.

Source

pub fn set_automated_snapshot_retention_period(self, input: Option<i32>) -> Self

The number of days that automated snapshots are retained. If the value is 0, automated snapshots are disabled. Even if automated snapshots are disabled, you can still create manual snapshots when you want with CreateClusterSnapshot.

If you decrease the automated snapshot retention period from its current value, existing automated snapshots that fall outside of the new retention period will be immediately deleted.

You can't disable automated snapshots for RA3 node types. Set the automated retention period from 1-35 days.

Default: Uses existing setting.

Constraints: Must be a value from 0 to 35.

Source

pub fn get_automated_snapshot_retention_period(&self) -> &Option<i32>

The number of days that automated snapshots are retained. If the value is 0, automated snapshots are disabled. Even if automated snapshots are disabled, you can still create manual snapshots when you want with CreateClusterSnapshot.

If you decrease the automated snapshot retention period from its current value, existing automated snapshots that fall outside of the new retention period will be immediately deleted.

You can't disable automated snapshots for RA3 node types. Set the automated retention period from 1-35 days.

Default: Uses existing setting.

Constraints: Must be a value from 0 to 35.

Source

pub fn manual_snapshot_retention_period(self, input: i32) -> Self

The default for number of days that a newly created manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely. This value doesn't retroactively change the retention periods of existing manual snapshots.

The value must be either -1 or an integer between 1 and 3,653.

The default value is -1.

Source

pub fn set_manual_snapshot_retention_period(self, input: Option<i32>) -> Self

The default for number of days that a newly created manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely. This value doesn't retroactively change the retention periods of existing manual snapshots.

The value must be either -1 or an integer between 1 and 3,653.

The default value is -1.

Source

pub fn get_manual_snapshot_retention_period(&self) -> &Option<i32>

The default for number of days that a newly created manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely. This value doesn't retroactively change the retention periods of existing manual snapshots.

The value must be either -1 or an integer between 1 and 3,653.

The default value is -1.

Source

pub fn preferred_maintenance_window(self, input: impl Into<String>) -> Self

The weekly time range (in UTC) during which system maintenance can occur, if necessary. If system maintenance is necessary during the window, it may result in an outage.

This maintenance window change is made immediately. If the new maintenance window indicates the current time, there must be at least 120 minutes between the current time and end of the window in order to ensure that pending changes are applied.

Default: Uses existing setting.

Format: ddd:hh24:mi-ddd:hh24:mi, for example wed:07:30-wed:08:00.

Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun

Constraints: Must be at least 30 minutes.

Source

pub fn set_preferred_maintenance_window(self, input: Option<String>) -> Self

The weekly time range (in UTC) during which system maintenance can occur, if necessary. If system maintenance is necessary during the window, it may result in an outage.

This maintenance window change is made immediately. If the new maintenance window indicates the current time, there must be at least 120 minutes between the current time and end of the window in order to ensure that pending changes are applied.

Default: Uses existing setting.

Format: ddd:hh24:mi-ddd:hh24:mi, for example wed:07:30-wed:08:00.

Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun

Constraints: Must be at least 30 minutes.

Source

pub fn get_preferred_maintenance_window(&self) -> &Option<String>

The weekly time range (in UTC) during which system maintenance can occur, if necessary. If system maintenance is necessary during the window, it may result in an outage.

This maintenance window change is made immediately. If the new maintenance window indicates the current time, there must be at least 120 minutes between the current time and end of the window in order to ensure that pending changes are applied.

Default: Uses existing setting.

Format: ddd:hh24:mi-ddd:hh24:mi, for example wed:07:30-wed:08:00.

Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun

Constraints: Must be at least 30 minutes.

Source

pub fn cluster_version(self, input: impl Into<String>) -> Self

The new version number of the Amazon Redshift engine to upgrade to.

For major version upgrades, if a non-default cluster parameter group is currently in use, a new cluster parameter group in the cluster parameter group family for the new version must be specified. The new cluster parameter group can be the default for that cluster parameter group family. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide.

Example: 1.0

Source

pub fn set_cluster_version(self, input: Option<String>) -> Self

The new version number of the Amazon Redshift engine to upgrade to.

For major version upgrades, if a non-default cluster parameter group is currently in use, a new cluster parameter group in the cluster parameter group family for the new version must be specified. The new cluster parameter group can be the default for that cluster parameter group family. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide.

Example: 1.0

Source

pub fn get_cluster_version(&self) -> &Option<String>

The new version number of the Amazon Redshift engine to upgrade to.

For major version upgrades, if a non-default cluster parameter group is currently in use, a new cluster parameter group in the cluster parameter group family for the new version must be specified. The new cluster parameter group can be the default for that cluster parameter group family. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide.

Example: 1.0

Source

pub fn allow_version_upgrade(self, input: bool) -> Self

If true, major version upgrades will be applied automatically to the cluster during the maintenance window.

Default: false

Source

pub fn set_allow_version_upgrade(self, input: Option<bool>) -> Self

If true, major version upgrades will be applied automatically to the cluster during the maintenance window.

Default: false

Source

pub fn get_allow_version_upgrade(&self) -> &Option<bool>

If true, major version upgrades will be applied automatically to the cluster during the maintenance window.

Default: false

Source

pub fn hsm_client_certificate_identifier(self, input: impl Into<String>) -> Self

Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.

Source

pub fn set_hsm_client_certificate_identifier( self, input: Option<String>, ) -> Self

Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.

Source

pub fn get_hsm_client_certificate_identifier(&self) -> &Option<String>

Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.

Source

pub fn hsm_configuration_identifier(self, input: impl Into<String>) -> Self

Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.

Source

pub fn set_hsm_configuration_identifier(self, input: Option<String>) -> Self

Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.

Source

pub fn get_hsm_configuration_identifier(&self) -> &Option<String>

Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.

Source

pub fn new_cluster_identifier(self, input: impl Into<String>) -> Self

The new identifier for the cluster.

Constraints:

  • Must contain from 1 to 63 alphanumeric characters or hyphens.

  • Alphabetic characters must be lowercase.

  • First character must be a letter.

  • Cannot end with a hyphen or contain two consecutive hyphens.

  • Must be unique for all clusters within an Amazon Web Services account.

Example: examplecluster

Source

pub fn set_new_cluster_identifier(self, input: Option<String>) -> Self

The new identifier for the cluster.

Constraints:

  • Must contain from 1 to 63 alphanumeric characters or hyphens.

  • Alphabetic characters must be lowercase.

  • First character must be a letter.

  • Cannot end with a hyphen or contain two consecutive hyphens.

  • Must be unique for all clusters within an Amazon Web Services account.

Example: examplecluster

Source

pub fn get_new_cluster_identifier(&self) -> &Option<String>

The new identifier for the cluster.

Constraints:

  • Must contain from 1 to 63 alphanumeric characters or hyphens.

  • Alphabetic characters must be lowercase.

  • First character must be a letter.

  • Cannot end with a hyphen or contain two consecutive hyphens.

  • Must be unique for all clusters within an Amazon Web Services account.

Example: examplecluster

Source

pub fn publicly_accessible(self, input: bool) -> Self

If true, the cluster can be accessed from a public network. Only clusters in VPCs can be set to be publicly available.

Default: false

Source

pub fn set_publicly_accessible(self, input: Option<bool>) -> Self

If true, the cluster can be accessed from a public network. Only clusters in VPCs can be set to be publicly available.

Default: false

Source

pub fn get_publicly_accessible(&self) -> &Option<bool>

If true, the cluster can be accessed from a public network. Only clusters in VPCs can be set to be publicly available.

Default: false

Source

pub fn elastic_ip(self, input: impl Into<String>) -> Self

The Elastic IP (EIP) address for the cluster.

Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible through an Internet gateway. For more information about provisioning clusters in EC2-VPC, go to Supported Platforms to Launch Your Cluster in the Amazon Redshift Cluster Management Guide.

Source

pub fn set_elastic_ip(self, input: Option<String>) -> Self

The Elastic IP (EIP) address for the cluster.

Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible through an Internet gateway. For more information about provisioning clusters in EC2-VPC, go to Supported Platforms to Launch Your Cluster in the Amazon Redshift Cluster Management Guide.

Source

pub fn get_elastic_ip(&self) -> &Option<String>

The Elastic IP (EIP) address for the cluster.

Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible through an Internet gateway. For more information about provisioning clusters in EC2-VPC, go to Supported Platforms to Launch Your Cluster in the Amazon Redshift Cluster Management Guide.

Source

pub fn enhanced_vpc_routing(self, input: bool) -> Self

An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.

If this option is true, enhanced VPC routing is enabled.

Default: false

Source

pub fn set_enhanced_vpc_routing(self, input: Option<bool>) -> Self

An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.

If this option is true, enhanced VPC routing is enabled.

Default: false

Source

pub fn get_enhanced_vpc_routing(&self) -> &Option<bool>

An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.

If this option is true, enhanced VPC routing is enabled.

Default: false

Source

pub fn maintenance_track_name(self, input: impl Into<String>) -> Self

The name for the maintenance track that you want to assign for the cluster. This name change is asynchronous. The new track name stays in the PendingModifiedValues for the cluster until the next maintenance window. When the maintenance track changes, the cluster is switched to the latest cluster release available for the maintenance track. At this point, the maintenance track name is applied.

Source

pub fn set_maintenance_track_name(self, input: Option<String>) -> Self

The name for the maintenance track that you want to assign for the cluster. This name change is asynchronous. The new track name stays in the PendingModifiedValues for the cluster until the next maintenance window. When the maintenance track changes, the cluster is switched to the latest cluster release available for the maintenance track. At this point, the maintenance track name is applied.

Source

pub fn get_maintenance_track_name(&self) -> &Option<String>

The name for the maintenance track that you want to assign for the cluster. This name change is asynchronous. The new track name stays in the PendingModifiedValues for the cluster until the next maintenance window. When the maintenance track changes, the cluster is switched to the latest cluster release available for the maintenance track. At this point, the maintenance track name is applied.

Source

pub fn encrypted(self, input: bool) -> Self

Indicates whether the cluster is encrypted. If the value is encrypted (true) and you provide a value for the KmsKeyId parameter, we encrypt the cluster with the provided KmsKeyId. If you don't provide a KmsKeyId, we encrypt with the default key.

If the value is not encrypted (false), then the cluster is decrypted.

Source

pub fn set_encrypted(self, input: Option<bool>) -> Self

Indicates whether the cluster is encrypted. If the value is encrypted (true) and you provide a value for the KmsKeyId parameter, we encrypt the cluster with the provided KmsKeyId. If you don't provide a KmsKeyId, we encrypt with the default key.

If the value is not encrypted (false), then the cluster is decrypted.

Source

pub fn get_encrypted(&self) -> &Option<bool>

Indicates whether the cluster is encrypted. If the value is encrypted (true) and you provide a value for the KmsKeyId parameter, we encrypt the cluster with the provided KmsKeyId. If you don't provide a KmsKeyId, we encrypt with the default key.

If the value is not encrypted (false), then the cluster is decrypted.

Source

pub fn kms_key_id(self, input: impl Into<String>) -> Self

The Key Management Service (KMS) key ID of the encryption key that you want to use to encrypt data in the cluster.

Source

pub fn set_kms_key_id(self, input: Option<String>) -> Self

The Key Management Service (KMS) key ID of the encryption key that you want to use to encrypt data in the cluster.

Source

pub fn get_kms_key_id(&self) -> &Option<String>

The Key Management Service (KMS) key ID of the encryption key that you want to use to encrypt data in the cluster.

Source

pub fn availability_zone_relocation(self, input: bool) -> Self

The option to enable relocation for an Amazon Redshift cluster between Availability Zones after the cluster modification is complete.

Source

pub fn set_availability_zone_relocation(self, input: Option<bool>) -> Self

The option to enable relocation for an Amazon Redshift cluster between Availability Zones after the cluster modification is complete.

Source

pub fn get_availability_zone_relocation(&self) -> &Option<bool>

The option to enable relocation for an Amazon Redshift cluster between Availability Zones after the cluster modification is complete.

Source

pub fn availability_zone(self, input: impl Into<String>) -> Self

The option to initiate relocation for an Amazon Redshift cluster to the target Availability Zone.

Source

pub fn set_availability_zone(self, input: Option<String>) -> Self

The option to initiate relocation for an Amazon Redshift cluster to the target Availability Zone.

Source

pub fn get_availability_zone(&self) -> &Option<String>

The option to initiate relocation for an Amazon Redshift cluster to the target Availability Zone.

Source

pub fn port(self, input: i32) -> Self

The option to change the port of an Amazon Redshift cluster.

Valid Values:

  • For clusters with ra3 nodes - Select a port within the ranges 5431-5455 or 8191-8215. (If you have an existing cluster with ra3 nodes, it isn't required that you change the port to these ranges.)

  • For clusters with dc2 nodes - Select a port within the range 1150-65535.

Source

pub fn set_port(self, input: Option<i32>) -> Self

The option to change the port of an Amazon Redshift cluster.

Valid Values:

  • For clusters with ra3 nodes - Select a port within the ranges 5431-5455 or 8191-8215. (If you have an existing cluster with ra3 nodes, it isn't required that you change the port to these ranges.)

  • For clusters with dc2 nodes - Select a port within the range 1150-65535.

Source

pub fn get_port(&self) -> &Option<i32>

The option to change the port of an Amazon Redshift cluster.

Valid Values:

  • For clusters with ra3 nodes - Select a port within the ranges 5431-5455 or 8191-8215. (If you have an existing cluster with ra3 nodes, it isn't required that you change the port to these ranges.)

  • For clusters with dc2 nodes - Select a port within the range 1150-65535.

Source

pub fn manage_master_password(self, input: bool) -> Self

If true, Amazon Redshift uses Secrets Manager to manage this cluster's admin credentials. You can't use MasterUserPassword if ManageMasterPassword is true. If ManageMasterPassword is false or not set, Amazon Redshift uses MasterUserPassword for the admin user account's password.

Source

pub fn set_manage_master_password(self, input: Option<bool>) -> Self

If true, Amazon Redshift uses Secrets Manager to manage this cluster's admin credentials. You can't use MasterUserPassword if ManageMasterPassword is true. If ManageMasterPassword is false or not set, Amazon Redshift uses MasterUserPassword for the admin user account's password.

Source

pub fn get_manage_master_password(&self) -> &Option<bool>

If true, Amazon Redshift uses Secrets Manager to manage this cluster's admin credentials. You can't use MasterUserPassword if ManageMasterPassword is true. If ManageMasterPassword is false or not set, Amazon Redshift uses MasterUserPassword for the admin user account's password.

Source

pub fn master_password_secret_kms_key_id(self, input: impl Into<String>) -> Self

The ID of the Key Management Service (KMS) key used to encrypt and store the cluster's admin credentials secret. You can only use this parameter if ManageMasterPassword is true.

Source

pub fn set_master_password_secret_kms_key_id( self, input: Option<String>, ) -> Self

The ID of the Key Management Service (KMS) key used to encrypt and store the cluster's admin credentials secret. You can only use this parameter if ManageMasterPassword is true.

Source

pub fn get_master_password_secret_kms_key_id(&self) -> &Option<String>

The ID of the Key Management Service (KMS) key used to encrypt and store the cluster's admin credentials secret. You can only use this parameter if ManageMasterPassword is true.

Source

pub fn ip_address_type(self, input: impl Into<String>) -> Self

The IP address types that the cluster supports. Possible values are ipv4 and dualstack.

Source

pub fn set_ip_address_type(self, input: Option<String>) -> Self

The IP address types that the cluster supports. Possible values are ipv4 and dualstack.

Source

pub fn get_ip_address_type(&self) -> &Option<String>

The IP address types that the cluster supports. Possible values are ipv4 and dualstack.

Source

pub fn multi_az(self, input: bool) -> Self

If true and the cluster is currently only deployed in a single Availability Zone, the cluster will be modified to be deployed in two Availability Zones.

Source

pub fn set_multi_az(self, input: Option<bool>) -> Self

If true and the cluster is currently only deployed in a single Availability Zone, the cluster will be modified to be deployed in two Availability Zones.

Source

pub fn get_multi_az(&self) -> &Option<bool>

If true and the cluster is currently only deployed in a single Availability Zone, the cluster will be modified to be deployed in two Availability Zones.

Source

pub fn build(self) -> Result<ModifyClusterInput, BuildError>

Consumes the builder and constructs a ModifyClusterInput.

Source§

impl ModifyClusterInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<ModifyClusterOutput, SdkError<ModifyClusterError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source§

impl Clone for ModifyClusterInputBuilder

Source§

fn clone(&self) -> ModifyClusterInputBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for ModifyClusterInputBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for ModifyClusterInputBuilder

Source§

fn default() -> ModifyClusterInputBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for ModifyClusterInputBuilder

Source§

fn eq(&self, other: &ModifyClusterInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for ModifyClusterInputBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,