pub struct CreateClusterParameterGroupFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateClusterParameterGroup.
Creates an Amazon Redshift parameter group.
Creating parameter groups is independent of creating clusters. You can associate a cluster with a parameter group when you create the cluster. You can also associate an existing cluster with a parameter group after the cluster is created by using ModifyCluster.
Parameters in the parameter group define specific behavior that applies to the databases you create on the cluster. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide.
Implementations§
Source§impl CreateClusterParameterGroupFluentBuilder
impl CreateClusterParameterGroupFluentBuilder
Sourcepub fn as_input(&self) -> &CreateClusterParameterGroupInputBuilder
pub fn as_input(&self) -> &CreateClusterParameterGroupInputBuilder
Access the CreateClusterParameterGroup as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateClusterParameterGroupOutput, SdkError<CreateClusterParameterGroupError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateClusterParameterGroupOutput, SdkError<CreateClusterParameterGroupError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateClusterParameterGroupOutput, CreateClusterParameterGroupError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateClusterParameterGroupOutput, CreateClusterParameterGroupError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn parameter_group_name(self, input: impl Into<String>) -> Self
pub fn parameter_group_name(self, input: impl Into<String>) -> Self
The name of the cluster parameter group.
Constraints:
-
Must be 1 to 255 alphanumeric characters or hyphens
-
First character must be a letter.
-
Cannot end with a hyphen or contain two consecutive hyphens.
-
Must be unique withing your Amazon Web Services account.
This value is stored as a lower-case string.
Sourcepub fn set_parameter_group_name(self, input: Option<String>) -> Self
pub fn set_parameter_group_name(self, input: Option<String>) -> Self
The name of the cluster parameter group.
Constraints:
-
Must be 1 to 255 alphanumeric characters or hyphens
-
First character must be a letter.
-
Cannot end with a hyphen or contain two consecutive hyphens.
-
Must be unique withing your Amazon Web Services account.
This value is stored as a lower-case string.
Sourcepub fn get_parameter_group_name(&self) -> &Option<String>
pub fn get_parameter_group_name(&self) -> &Option<String>
The name of the cluster parameter group.
Constraints:
-
Must be 1 to 255 alphanumeric characters or hyphens
-
First character must be a letter.
-
Cannot end with a hyphen or contain two consecutive hyphens.
-
Must be unique withing your Amazon Web Services account.
This value is stored as a lower-case string.
Sourcepub fn parameter_group_family(self, input: impl Into<String>) -> Self
pub fn parameter_group_family(self, input: impl Into<String>) -> Self
The Amazon Redshift engine version to which the cluster parameter group applies. The cluster engine version determines the set of parameters.
To get a list of valid parameter group family names, you can call DescribeClusterParameterGroups. By default, Amazon Redshift returns a list of all the parameter groups that are owned by your Amazon Web Services account, including the default parameter groups for each Amazon Redshift engine version. The parameter group family names associated with the default parameter groups provide you the valid values. For example, a valid family name is "redshift-1.0".
Sourcepub fn set_parameter_group_family(self, input: Option<String>) -> Self
pub fn set_parameter_group_family(self, input: Option<String>) -> Self
The Amazon Redshift engine version to which the cluster parameter group applies. The cluster engine version determines the set of parameters.
To get a list of valid parameter group family names, you can call DescribeClusterParameterGroups. By default, Amazon Redshift returns a list of all the parameter groups that are owned by your Amazon Web Services account, including the default parameter groups for each Amazon Redshift engine version. The parameter group family names associated with the default parameter groups provide you the valid values. For example, a valid family name is "redshift-1.0".
Sourcepub fn get_parameter_group_family(&self) -> &Option<String>
pub fn get_parameter_group_family(&self) -> &Option<String>
The Amazon Redshift engine version to which the cluster parameter group applies. The cluster engine version determines the set of parameters.
To get a list of valid parameter group family names, you can call DescribeClusterParameterGroups. By default, Amazon Redshift returns a list of all the parameter groups that are owned by your Amazon Web Services account, including the default parameter groups for each Amazon Redshift engine version. The parameter group family names associated with the default parameter groups provide you the valid values. For example, a valid family name is "redshift-1.0".
Sourcepub fn description(self, input: impl Into<String>) -> Self
pub fn description(self, input: impl Into<String>) -> Self
A description of the parameter group.
Sourcepub fn set_description(self, input: Option<String>) -> Self
pub fn set_description(self, input: Option<String>) -> Self
A description of the parameter group.
Sourcepub fn get_description(&self) -> &Option<String>
pub fn get_description(&self) -> &Option<String>
A description of the parameter group.
Appends an item to Tags.
To override the contents of this collection use set_tags.
A list of tag instances.
A list of tag instances.
A list of tag instances.
Trait Implementations§
Source§impl Clone for CreateClusterParameterGroupFluentBuilder
impl Clone for CreateClusterParameterGroupFluentBuilder
Source§fn clone(&self) -> CreateClusterParameterGroupFluentBuilder
fn clone(&self) -> CreateClusterParameterGroupFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateClusterParameterGroupFluentBuilder
impl !RefUnwindSafe for CreateClusterParameterGroupFluentBuilder
impl Send for CreateClusterParameterGroupFluentBuilder
impl Sync for CreateClusterParameterGroupFluentBuilder
impl Unpin for CreateClusterParameterGroupFluentBuilder
impl !UnwindSafe for CreateClusterParameterGroupFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);