Struct aws_sdk_redshift::operation::modify_cluster::builders::ModifyClusterFluentBuilder

pub struct ModifyClusterFluentBuilder { /* private fields */ }

Fluent builder constructing a request to ModifyCluster.

Modifies the settings for a cluster.

You can also change node type and the number of nodes to scale up or down the cluster. When resizing a cluster, you must specify both the number of nodes and the node type even if one of the parameters does not change.

You can add another security or parameter group, or change the admin user password. Resetting a cluster password or modifying the security groups associated with a cluster do not need a reboot. However, modifying a parameter group requires a reboot for parameters to take effect. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide.

Implementations

impl ModifyClusterFluentBuilder

pub fn as_input(&self) -> &ModifyClusterInputBuilder

Access the ModifyCluster as a reference.

pub async fn send( self ) -> Result<ModifyClusterOutput, SdkError<ModifyClusterError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub async fn customize( self ) -> Result<CustomizableOperation<ModifyClusterOutput, ModifyClusterError>, SdkError<ModifyClusterError>>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn cluster_identifier(self, input: impl Into<String>) -> Self

The unique identifier of the cluster to be modified.

Example: examplecluster

pub fn set_cluster_identifier(self, input: Option<String>) -> Self

The unique identifier of the cluster to be modified.

Example: examplecluster

pub fn get_cluster_identifier(&self) -> &Option<String>

The unique identifier of the cluster to be modified.

Example: examplecluster

pub fn cluster_type(self, input: impl Into<String>) -> Self

The new cluster type.

When you submit your cluster resize request, your existing cluster goes into a read-only mode. After Amazon Redshift provisions a new cluster based on your resize requirements, there will be outage for a period while the old cluster is deleted and your connection is switched to the new cluster. You can use DescribeResize to track the progress of the resize request.

Valid Values: multi-node | single-node

pub fn set_cluster_type(self, input: Option<String>) -> Self

The new cluster type.

When you submit your cluster resize request, your existing cluster goes into a read-only mode. After Amazon Redshift provisions a new cluster based on your resize requirements, there will be outage for a period while the old cluster is deleted and your connection is switched to the new cluster. You can use DescribeResize to track the progress of the resize request.

Valid Values: multi-node | single-node

pub fn get_cluster_type(&self) -> &Option<String>

The new cluster type.

When you submit your cluster resize request, your existing cluster goes into a read-only mode. After Amazon Redshift provisions a new cluster based on your resize requirements, there will be outage for a period while the old cluster is deleted and your connection is switched to the new cluster. You can use DescribeResize to track the progress of the resize request.

Valid Values: multi-node | single-node

pub fn node_type(self, input: impl Into<String>) -> Self

The new node type of the cluster. If you specify a new node type, you must also specify the number of nodes parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: ds2.xlarge | ds2.8xlarge | dc1.large | dc1.8xlarge | dc2.large | dc2.8xlarge | ra3.xlplus | ra3.4xlarge | ra3.16xlarge

pub fn set_node_type(self, input: Option<String>) -> Self

The new node type of the cluster. If you specify a new node type, you must also specify the number of nodes parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: ds2.xlarge | ds2.8xlarge | dc1.large | dc1.8xlarge | dc2.large | dc2.8xlarge | ra3.xlplus | ra3.4xlarge | ra3.16xlarge

pub fn get_node_type(&self) -> &Option<String>

The new node type of the cluster. If you specify a new node type, you must also specify the number of nodes parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: ds2.xlarge | ds2.8xlarge | dc1.large | dc1.8xlarge | dc2.large | dc2.8xlarge | ra3.xlplus | ra3.4xlarge | ra3.16xlarge

pub fn number_of_nodes(self, input: i32) -> Self

The new number of nodes of the cluster. If you specify a new number of nodes, you must also specify the node type parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: Integer greater than 0.

pub fn set_number_of_nodes(self, input: Option<i32>) -> Self

The new number of nodes of the cluster. If you specify a new number of nodes, you must also specify the node type parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: Integer greater than 0.

pub fn get_number_of_nodes(&self) -> &Option<i32>

The new number of nodes of the cluster. If you specify a new number of nodes, you must also specify the node type parameter.

For more information about resizing clusters, go to Resizing Clusters in Amazon Redshift in the Amazon Redshift Cluster Management Guide.

Valid Values: Integer greater than 0.

pub fn cluster_security_groups(self, input: impl Into<String>) -> Self

Appends an item to ClusterSecurityGroups.

To override the contents of this collection use set_cluster_security_groups.

A list of cluster security groups to be authorized on this cluster. This change is asynchronously applied as soon as possible.

Security groups currently associated with the cluster, and not in the list of groups to apply, will be revoked from the cluster.

Constraints:

• Must be 1 to 255 alphanumeric characters or hyphens

• First character must be a letter

• Cannot end with a hyphen or contain two consecutive hyphens

pub fn set_cluster_security_groups(self, input: Option<Vec<String>>) -> Self

A list of cluster security groups to be authorized on this cluster. This change is asynchronously applied as soon as possible.

Security groups currently associated with the cluster, and not in the list of groups to apply, will be revoked from the cluster.

Constraints:

• Must be 1 to 255 alphanumeric characters or hyphens

• First character must be a letter

• Cannot end with a hyphen or contain two consecutive hyphens

pub fn get_cluster_security_groups(&self) -> &Option<Vec<String>>

A list of cluster security groups to be authorized on this cluster. This change is asynchronously applied as soon as possible.

Security groups currently associated with the cluster, and not in the list of groups to apply, will be revoked from the cluster.

Constraints:

• Must be 1 to 255 alphanumeric characters or hyphens

• First character must be a letter

• Cannot end with a hyphen or contain two consecutive hyphens

pub fn vpc_security_group_ids(self, input: impl Into<String>) -> Self

Appends an item to VpcSecurityGroupIds.

To override the contents of this collection use set_vpc_security_group_ids.

A list of virtual private cloud (VPC) security groups to be associated with the cluster. This change is asynchronously applied as soon as possible.

pub fn set_vpc_security_group_ids(self, input: Option<Vec<String>>) -> Self

A list of virtual private cloud (VPC) security groups to be associated with the cluster. This change is asynchronously applied as soon as possible.

pub fn get_vpc_security_group_ids(&self) -> &Option<Vec<String>>

A list of virtual private cloud (VPC) security groups to be associated with the cluster. This change is asynchronously applied as soon as possible.

pub fn master_user_password(self, input: impl Into<String>) -> Self

The new password for the cluster admin user. This change is asynchronously applied as soon as possible. Between the time of the request and the completion of the request, the MasterUserPassword element exists in the PendingModifiedValues element of the operation response.

Operations never return the password, so this operation provides a way to regain access to the admin user account for a cluster if the password is lost.

Default: Uses existing setting.

Constraints:

• Must be between 8 and 64 characters in length.

• Must contain at least one uppercase letter.

• Must contain at least one lowercase letter.

• Must contain one number.

• Can be any printable ASCII character (ASCII code 33-126) except ' (single quote), " (double quote), \, /, or @.

pub fn set_master_user_password(self, input: Option<String>) -> Self

The new password for the cluster admin user. This change is asynchronously applied as soon as possible. Between the time of the request and the completion of the request, the MasterUserPassword element exists in the PendingModifiedValues element of the operation response.

Operations never return the password, so this operation provides a way to regain access to the admin user account for a cluster if the password is lost.

Default: Uses existing setting.

Constraints:

• Must be between 8 and 64 characters in length.

• Must contain at least one uppercase letter.

• Must contain at least one lowercase letter.

• Must contain one number.

• Can be any printable ASCII character (ASCII code 33-126) except ' (single quote), " (double quote), \, /, or @.

pub fn get_master_user_password(&self) -> &Option<String>

The new password for the cluster admin user. This change is asynchronously applied as soon as possible. Between the time of the request and the completion of the request, the MasterUserPassword element exists in the PendingModifiedValues element of the operation response.

Operations never return the password, so this operation provides a way to regain access to the admin user account for a cluster if the password is lost.

Default: Uses existing setting.

Constraints:

• Must be between 8 and 64 characters in length.

• Must contain at least one uppercase letter.

• Must contain at least one lowercase letter.

• Must contain one number.

• Can be any printable ASCII character (ASCII code 33-126) except ' (single quote), " (double quote), \, /, or @.

pub fn cluster_parameter_group_name(self, input: impl Into<String>) -> Self

The name of the cluster parameter group to apply to this cluster. This change is applied only after the cluster is rebooted. To reboot a cluster use RebootCluster.

Default: Uses existing setting.

Constraints: The cluster parameter group must be in the same parameter group family that matches the cluster version.

pub fn set_cluster_parameter_group_name(self, input: Option<String>) -> Self

The name of the cluster parameter group to apply to this cluster. This change is applied only after the cluster is rebooted. To reboot a cluster use RebootCluster.

Default: Uses existing setting.

Constraints: The cluster parameter group must be in the same parameter group family that matches the cluster version.

pub fn get_cluster_parameter_group_name(&self) -> &Option<String>

The name of the cluster parameter group to apply to this cluster. This change is applied only after the cluster is rebooted. To reboot a cluster use RebootCluster.

Default: Uses existing setting.

Constraints: The cluster parameter group must be in the same parameter group family that matches the cluster version.

pub fn automated_snapshot_retention_period(self, input: i32) -> Self

The number of days that automated snapshots are retained. If the value is 0, automated snapshots are disabled. Even if automated snapshots are disabled, you can still create manual snapshots when you want with CreateClusterSnapshot.

If you decrease the automated snapshot retention period from its current value, existing automated snapshots that fall outside of the new retention period will be immediately deleted.

You can't disable automated snapshots for RA3 node types. Set the automated retention period from 1-35 days.

Default: Uses existing setting.

Constraints: Must be a value from 0 to 35.

pub fn set_automated_snapshot_retention_period(self, input: Option<i32>) -> Self

The number of days that automated snapshots are retained. If the value is 0, automated snapshots are disabled. Even if automated snapshots are disabled, you can still create manual snapshots when you want with CreateClusterSnapshot.

If you decrease the automated snapshot retention period from its current value, existing automated snapshots that fall outside of the new retention period will be immediately deleted.

You can't disable automated snapshots for RA3 node types. Set the automated retention period from 1-35 days.

Default: Uses existing setting.

Constraints: Must be a value from 0 to 35.

pub fn get_automated_snapshot_retention_period(&self) -> &Option<i32>

The number of days that automated snapshots are retained. If the value is 0, automated snapshots are disabled. Even if automated snapshots are disabled, you can still create manual snapshots when you want with CreateClusterSnapshot.

If you decrease the automated snapshot retention period from its current value, existing automated snapshots that fall outside of the new retention period will be immediately deleted.

You can't disable automated snapshots for RA3 node types. Set the automated retention period from 1-35 days.

Default: Uses existing setting.

Constraints: Must be a value from 0 to 35.

pub fn manual_snapshot_retention_period(self, input: i32) -> Self

The default for number of days that a newly created manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely. This value doesn't retroactively change the retention periods of existing manual snapshots.

The value must be either -1 or an integer between 1 and 3,653.

The default value is -1.

pub fn set_manual_snapshot_retention_period(self, input: Option<i32>) -> Self

The default for number of days that a newly created manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely. This value doesn't retroactively change the retention periods of existing manual snapshots.

The value must be either -1 or an integer between 1 and 3,653.

The default value is -1.

pub fn get_manual_snapshot_retention_period(&self) -> &Option<i32>

The default for number of days that a newly created manual snapshot is retained. If the value is -1, the manual snapshot is retained indefinitely. This value doesn't retroactively change the retention periods of existing manual snapshots.

The value must be either -1 or an integer between 1 and 3,653.

The default value is -1.

pub fn preferred_maintenance_window(self, input: impl Into<String>) -> Self

The weekly time range (in UTC) during which system maintenance can occur, if necessary. If system maintenance is necessary during the window, it may result in an outage.

This maintenance window change is made immediately. If the new maintenance window indicates the current time, there must be at least 120 minutes between the current time and end of the window in order to ensure that pending changes are applied.

Default: Uses existing setting.

Format: ddd:hh24:mi-ddd:hh24:mi, for example wed:07:30-wed:08:00.

Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun

Constraints: Must be at least 30 minutes.

pub fn set_preferred_maintenance_window(self, input: Option<String>) -> Self

The weekly time range (in UTC) during which system maintenance can occur, if necessary. If system maintenance is necessary during the window, it may result in an outage.

This maintenance window change is made immediately. If the new maintenance window indicates the current time, there must be at least 120 minutes between the current time and end of the window in order to ensure that pending changes are applied.

Default: Uses existing setting.

Format: ddd:hh24:mi-ddd:hh24:mi, for example wed:07:30-wed:08:00.

Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun

Constraints: Must be at least 30 minutes.

pub fn get_preferred_maintenance_window(&self) -> &Option<String>

The weekly time range (in UTC) during which system maintenance can occur, if necessary. If system maintenance is necessary during the window, it may result in an outage.

This maintenance window change is made immediately. If the new maintenance window indicates the current time, there must be at least 120 minutes between the current time and end of the window in order to ensure that pending changes are applied.

Default: Uses existing setting.

Format: ddd:hh24:mi-ddd:hh24:mi, for example wed:07:30-wed:08:00.

Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun

Constraints: Must be at least 30 minutes.

pub fn cluster_version(self, input: impl Into<String>) -> Self

The new version number of the Amazon Redshift engine to upgrade to.

For major version upgrades, if a non-default cluster parameter group is currently in use, a new cluster parameter group in the cluster parameter group family for the new version must be specified. The new cluster parameter group can be the default for that cluster parameter group family. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide.

Example: 1.0

pub fn set_cluster_version(self, input: Option<String>) -> Self

The new version number of the Amazon Redshift engine to upgrade to.

For major version upgrades, if a non-default cluster parameter group is currently in use, a new cluster parameter group in the cluster parameter group family for the new version must be specified. The new cluster parameter group can be the default for that cluster parameter group family. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide.

Example: 1.0

pub fn get_cluster_version(&self) -> &Option<String>

The new version number of the Amazon Redshift engine to upgrade to.

For major version upgrades, if a non-default cluster parameter group is currently in use, a new cluster parameter group in the cluster parameter group family for the new version must be specified. The new cluster parameter group can be the default for that cluster parameter group family. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide.

Example: 1.0

pub fn allow_version_upgrade(self, input: bool) -> Self

If true, major version upgrades will be applied automatically to the cluster during the maintenance window.

Default: false

pub fn set_allow_version_upgrade(self, input: Option<bool>) -> Self

If true, major version upgrades will be applied automatically to the cluster during the maintenance window.

Default: false

pub fn get_allow_version_upgrade(&self) -> &Option<bool>

If true, major version upgrades will be applied automatically to the cluster during the maintenance window.

Default: false

pub fn hsm_client_certificate_identifier(self, input: impl Into<String>) -> Self

Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.

pub fn set_hsm_client_certificate_identifier( self, input: Option<String> ) -> Self

Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.

pub fn get_hsm_client_certificate_identifier(&self) -> &Option<String>

Specifies the name of the HSM client certificate the Amazon Redshift cluster uses to retrieve the data encryption keys stored in an HSM.

pub fn hsm_configuration_identifier(self, input: impl Into<String>) -> Self

Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.

pub fn set_hsm_configuration_identifier(self, input: Option<String>) -> Self

Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.

pub fn get_hsm_configuration_identifier(&self) -> &Option<String>

Specifies the name of the HSM configuration that contains the information the Amazon Redshift cluster can use to retrieve and store keys in an HSM.

pub fn new_cluster_identifier(self, input: impl Into<String>) -> Self

The new identifier for the cluster.

Constraints:

• Must contain from 1 to 63 alphanumeric characters or hyphens.

• Alphabetic characters must be lowercase.

• First character must be a letter.

• Cannot end with a hyphen or contain two consecutive hyphens.

• Must be unique for all clusters within an Amazon Web Services account.

Example: examplecluster

pub fn set_new_cluster_identifier(self, input: Option<String>) -> Self

The new identifier for the cluster.

Constraints:

• Must contain from 1 to 63 alphanumeric characters or hyphens.

• Alphabetic characters must be lowercase.

• First character must be a letter.

• Cannot end with a hyphen or contain two consecutive hyphens.

• Must be unique for all clusters within an Amazon Web Services account.

Example: examplecluster

pub fn get_new_cluster_identifier(&self) -> &Option<String>

The new identifier for the cluster.

Constraints:

• Must contain from 1 to 63 alphanumeric characters or hyphens.

• Alphabetic characters must be lowercase.

• First character must be a letter.

• Cannot end with a hyphen or contain two consecutive hyphens.

• Must be unique for all clusters within an Amazon Web Services account.

Example: examplecluster

pub fn publicly_accessible(self, input: bool) -> Self

If true, the cluster can be accessed from a public network. Only clusters in VPCs can be set to be publicly available.

pub fn set_publicly_accessible(self, input: Option<bool>) -> Self

If true, the cluster can be accessed from a public network. Only clusters in VPCs can be set to be publicly available.

pub fn get_publicly_accessible(&self) -> &Option<bool>

If true, the cluster can be accessed from a public network. Only clusters in VPCs can be set to be publicly available.

pub fn elastic_ip(self, input: impl Into<String>) -> Self

The Elastic IP (EIP) address for the cluster.

Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible through an Internet gateway. For more information about provisioning clusters in EC2-VPC, go to Supported Platforms to Launch Your Cluster in the Amazon Redshift Cluster Management Guide.

pub fn set_elastic_ip(self, input: Option<String>) -> Self

The Elastic IP (EIP) address for the cluster.

Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible through an Internet gateway. For more information about provisioning clusters in EC2-VPC, go to Supported Platforms to Launch Your Cluster in the Amazon Redshift Cluster Management Guide.

pub fn get_elastic_ip(&self) -> &Option<String>

The Elastic IP (EIP) address for the cluster.

Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible through an Internet gateway. For more information about provisioning clusters in EC2-VPC, go to Supported Platforms to Launch Your Cluster in the Amazon Redshift Cluster Management Guide.

pub fn enhanced_vpc_routing(self, input: bool) -> Self

An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.

If this option is true, enhanced VPC routing is enabled.

Default: false

pub fn set_enhanced_vpc_routing(self, input: Option<bool>) -> Self

An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.

If this option is true, enhanced VPC routing is enabled.

Default: false

pub fn get_enhanced_vpc_routing(&self) -> &Option<bool>

An option that specifies whether to create the cluster with enhanced VPC routing enabled. To create a cluster that uses enhanced VPC routing, the cluster must be in a VPC. For more information, see Enhanced VPC Routing in the Amazon Redshift Cluster Management Guide.

If this option is true, enhanced VPC routing is enabled.

Default: false

pub fn maintenance_track_name(self, input: impl Into<String>) -> Self

The name for the maintenance track that you want to assign for the cluster. This name change is asynchronous. The new track name stays in the PendingModifiedValues for the cluster until the next maintenance window. When the maintenance track changes, the cluster is switched to the latest cluster release available for the maintenance track. At this point, the maintenance track name is applied.

pub fn set_maintenance_track_name(self, input: Option<String>) -> Self

The name for the maintenance track that you want to assign for the cluster. This name change is asynchronous. The new track name stays in the PendingModifiedValues for the cluster until the next maintenance window. When the maintenance track changes, the cluster is switched to the latest cluster release available for the maintenance track. At this point, the maintenance track name is applied.

pub fn get_maintenance_track_name(&self) -> &Option<String>

The name for the maintenance track that you want to assign for the cluster. This name change is asynchronous. The new track name stays in the PendingModifiedValues for the cluster until the next maintenance window. When the maintenance track changes, the cluster is switched to the latest cluster release available for the maintenance track. At this point, the maintenance track name is applied.

pub fn encrypted(self, input: bool) -> Self

Indicates whether the cluster is encrypted. If the value is encrypted (true) and you provide a value for the KmsKeyId parameter, we encrypt the cluster with the provided KmsKeyId. If you don't provide a KmsKeyId, we encrypt with the default key.

If the value is not encrypted (false), then the cluster is decrypted.

pub fn set_encrypted(self, input: Option<bool>) -> Self

Indicates whether the cluster is encrypted. If the value is encrypted (true) and you provide a value for the KmsKeyId parameter, we encrypt the cluster with the provided KmsKeyId. If you don't provide a KmsKeyId, we encrypt with the default key.

If the value is not encrypted (false), then the cluster is decrypted.

pub fn get_encrypted(&self) -> &Option<bool>

Indicates whether the cluster is encrypted. If the value is encrypted (true) and you provide a value for the KmsKeyId parameter, we encrypt the cluster with the provided KmsKeyId. If you don't provide a KmsKeyId, we encrypt with the default key.

If the value is not encrypted (false), then the cluster is decrypted.

pub fn kms_key_id(self, input: impl Into<String>) -> Self

The Key Management Service (KMS) key ID of the encryption key that you want to use to encrypt data in the cluster.

pub fn set_kms_key_id(self, input: Option<String>) -> Self

The Key Management Service (KMS) key ID of the encryption key that you want to use to encrypt data in the cluster.

pub fn get_kms_key_id(&self) -> &Option<String>

The Key Management Service (KMS) key ID of the encryption key that you want to use to encrypt data in the cluster.

pub fn availability_zone_relocation(self, input: bool) -> Self

The option to enable relocation for an Amazon Redshift cluster between Availability Zones after the cluster modification is complete.

pub fn set_availability_zone_relocation(self, input: Option<bool>) -> Self

The option to enable relocation for an Amazon Redshift cluster between Availability Zones after the cluster modification is complete.

pub fn get_availability_zone_relocation(&self) -> &Option<bool>

The option to enable relocation for an Amazon Redshift cluster between Availability Zones after the cluster modification is complete.

pub fn availability_zone(self, input: impl Into<String>) -> Self

The option to initiate relocation for an Amazon Redshift cluster to the target Availability Zone.

pub fn set_availability_zone(self, input: Option<String>) -> Self

The option to initiate relocation for an Amazon Redshift cluster to the target Availability Zone.

pub fn get_availability_zone(&self) -> &Option<String>

The option to initiate relocation for an Amazon Redshift cluster to the target Availability Zone.

pub fn port(self, input: i32) -> Self

The option to change the port of an Amazon Redshift cluster.

pub fn set_port(self, input: Option<i32>) -> Self

The option to change the port of an Amazon Redshift cluster.

pub fn get_port(&self) -> &Option<i32>

The option to change the port of an Amazon Redshift cluster.

Trait Implementations

impl Clone for ModifyClusterFluentBuilder

fn clone(&self) -> ModifyClusterFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ModifyClusterFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.