pub struct ModifyDBParameterGroupFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ModifyDBParameterGroup.
Modifies the parameters of a DB parameter group. To modify more than one parameter, submit a list of the following: ParameterName, ParameterValue, and ApplyMethod. A maximum of 20 parameters can be modified in a single request.
After you modify a DB parameter group, you should wait at least 5 minutes before creating your first DB instance that uses that DB parameter group as the default parameter group. This allows Amazon RDS to fully complete the modify operation before the parameter group is used as the default for a new DB instance. This is especially important for parameters that are critical when creating the default database for a DB instance, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon RDS console or the DescribeDBParameters command to verify that your DB parameter group has been created or modified.
Implementations§
Source§impl ModifyDBParameterGroupFluentBuilder
impl ModifyDBParameterGroupFluentBuilder
Sourcepub fn as_input(&self) -> &ModifyDbParameterGroupInputBuilder
pub fn as_input(&self) -> &ModifyDbParameterGroupInputBuilder
Access the ModifyDBParameterGroup as a reference.
Sourcepub async fn send(
self,
) -> Result<ModifyDbParameterGroupOutput, SdkError<ModifyDBParameterGroupError, HttpResponse>>
pub async fn send( self, ) -> Result<ModifyDbParameterGroupOutput, SdkError<ModifyDBParameterGroupError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ModifyDbParameterGroupOutput, ModifyDBParameterGroupError, Self>
pub fn customize( self, ) -> CustomizableOperation<ModifyDbParameterGroupOutput, ModifyDBParameterGroupError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn db_parameter_group_name(self, input: impl Into<String>) -> Self
pub fn db_parameter_group_name(self, input: impl Into<String>) -> Self
The name of the DB parameter group.
Constraints:
-
If supplied, must match the name of an existing
DBParameterGroup.
Sourcepub fn set_db_parameter_group_name(self, input: Option<String>) -> Self
pub fn set_db_parameter_group_name(self, input: Option<String>) -> Self
The name of the DB parameter group.
Constraints:
-
If supplied, must match the name of an existing
DBParameterGroup.
Sourcepub fn get_db_parameter_group_name(&self) -> &Option<String>
pub fn get_db_parameter_group_name(&self) -> &Option<String>
The name of the DB parameter group.
Constraints:
-
If supplied, must match the name of an existing
DBParameterGroup.
Sourcepub fn parameters(self, input: Parameter) -> Self
pub fn parameters(self, input: Parameter) -> Self
Appends an item to Parameters.
To override the contents of this collection use set_parameters.
An array of parameter names, values, and the application methods for the parameter update. At least one parameter name, value, and application method must be supplied; later arguments are optional. A maximum of 20 parameters can be modified in a single request.
Valid Values (for the application method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters.
When the application method is immediate, changes to dynamic parameters are applied immediately to the DB instances associated with the parameter group.
When the application method is pending-reboot, changes to dynamic and static parameters are applied after a reboot without failover to the DB instances associated with the parameter group.
You can't use pending-reboot with dynamic parameters on RDS for SQL Server DB instances. Use immediate.
For more information on modifying DB parameters, see Working with DB parameter groups in the Amazon RDS User Guide.
Sourcepub fn set_parameters(self, input: Option<Vec<Parameter>>) -> Self
pub fn set_parameters(self, input: Option<Vec<Parameter>>) -> Self
An array of parameter names, values, and the application methods for the parameter update. At least one parameter name, value, and application method must be supplied; later arguments are optional. A maximum of 20 parameters can be modified in a single request.
Valid Values (for the application method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters.
When the application method is immediate, changes to dynamic parameters are applied immediately to the DB instances associated with the parameter group.
When the application method is pending-reboot, changes to dynamic and static parameters are applied after a reboot without failover to the DB instances associated with the parameter group.
You can't use pending-reboot with dynamic parameters on RDS for SQL Server DB instances. Use immediate.
For more information on modifying DB parameters, see Working with DB parameter groups in the Amazon RDS User Guide.
Sourcepub fn get_parameters(&self) -> &Option<Vec<Parameter>>
pub fn get_parameters(&self) -> &Option<Vec<Parameter>>
An array of parameter names, values, and the application methods for the parameter update. At least one parameter name, value, and application method must be supplied; later arguments are optional. A maximum of 20 parameters can be modified in a single request.
Valid Values (for the application method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters.
When the application method is immediate, changes to dynamic parameters are applied immediately to the DB instances associated with the parameter group.
When the application method is pending-reboot, changes to dynamic and static parameters are applied after a reboot without failover to the DB instances associated with the parameter group.
You can't use pending-reboot with dynamic parameters on RDS for SQL Server DB instances. Use immediate.
For more information on modifying DB parameters, see Working with DB parameter groups in the Amazon RDS User Guide.
Trait Implementations§
Source§impl Clone for ModifyDBParameterGroupFluentBuilder
impl Clone for ModifyDBParameterGroupFluentBuilder
Source§fn clone(&self) -> ModifyDBParameterGroupFluentBuilder
fn clone(&self) -> ModifyDBParameterGroupFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ModifyDBParameterGroupFluentBuilder
impl !RefUnwindSafe for ModifyDBParameterGroupFluentBuilder
impl Send for ModifyDBParameterGroupFluentBuilder
impl Sync for ModifyDBParameterGroupFluentBuilder
impl Unpin for ModifyDBParameterGroupFluentBuilder
impl !UnwindSafe for ModifyDBParameterGroupFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);