pub struct ModifyCurrentDBClusterCapacityFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ModifyCurrentDBClusterCapacity.
Set the capacity of an Aurora Serverless v1 DB cluster to a specific value.
Aurora Serverless v1 scales seamlessly based on the workload on the DB cluster. In some cases, the capacity might not scale fast enough to meet a sudden change in workload, such as a large number of new transactions. Call ModifyCurrentDBClusterCapacity to set the capacity explicitly.
After this call sets the DB cluster capacity, Aurora Serverless v1 can automatically scale the DB cluster based on the cooldown period for scaling up and the cooldown period for scaling down.
For more information about Aurora Serverless v1, see Using Amazon Aurora Serverless v1 in the Amazon Aurora User Guide.
If you call ModifyCurrentDBClusterCapacity with the default TimeoutAction, connections that prevent Aurora Serverless v1 from finding a scaling point might be dropped. For more information about scaling points, see Autoscaling for Aurora Serverless v1 in the Amazon Aurora User Guide.
This operation only applies to Aurora Serverless v1 DB clusters.
Implementations§
Source§impl ModifyCurrentDBClusterCapacityFluentBuilder
impl ModifyCurrentDBClusterCapacityFluentBuilder
Sourcepub fn as_input(&self) -> &ModifyCurrentDbClusterCapacityInputBuilder
pub fn as_input(&self) -> &ModifyCurrentDbClusterCapacityInputBuilder
Access the ModifyCurrentDBClusterCapacity as a reference.
Sourcepub async fn send(
self,
) -> Result<ModifyCurrentDbClusterCapacityOutput, SdkError<ModifyCurrentDBClusterCapacityError, HttpResponse>>
pub async fn send( self, ) -> Result<ModifyCurrentDbClusterCapacityOutput, SdkError<ModifyCurrentDBClusterCapacityError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ModifyCurrentDbClusterCapacityOutput, ModifyCurrentDBClusterCapacityError, Self>
pub fn customize( self, ) -> CustomizableOperation<ModifyCurrentDbClusterCapacityOutput, ModifyCurrentDBClusterCapacityError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn db_cluster_identifier(self, input: impl Into<String>) -> Self
pub fn db_cluster_identifier(self, input: impl Into<String>) -> Self
The DB cluster identifier for the cluster being modified. This parameter isn't case-sensitive.
Constraints:
-
Must match the identifier of an existing DB cluster.
Sourcepub fn set_db_cluster_identifier(self, input: Option<String>) -> Self
pub fn set_db_cluster_identifier(self, input: Option<String>) -> Self
The DB cluster identifier for the cluster being modified. This parameter isn't case-sensitive.
Constraints:
-
Must match the identifier of an existing DB cluster.
Sourcepub fn get_db_cluster_identifier(&self) -> &Option<String>
pub fn get_db_cluster_identifier(&self) -> &Option<String>
The DB cluster identifier for the cluster being modified. This parameter isn't case-sensitive.
Constraints:
-
Must match the identifier of an existing DB cluster.
Sourcepub fn capacity(self, input: i32) -> Self
pub fn capacity(self, input: i32) -> Self
The DB cluster capacity.
When you change the capacity of a paused Aurora Serverless v1 DB cluster, it automatically resumes.
Constraints:
-
For Aurora MySQL, valid capacity values are
1,2,4,8,16,32,64,128, and256. -
For Aurora PostgreSQL, valid capacity values are
2,4,8,16,32,64,192, and384.
Sourcepub fn set_capacity(self, input: Option<i32>) -> Self
pub fn set_capacity(self, input: Option<i32>) -> Self
The DB cluster capacity.
When you change the capacity of a paused Aurora Serverless v1 DB cluster, it automatically resumes.
Constraints:
-
For Aurora MySQL, valid capacity values are
1,2,4,8,16,32,64,128, and256. -
For Aurora PostgreSQL, valid capacity values are
2,4,8,16,32,64,192, and384.
Sourcepub fn get_capacity(&self) -> &Option<i32>
pub fn get_capacity(&self) -> &Option<i32>
The DB cluster capacity.
When you change the capacity of a paused Aurora Serverless v1 DB cluster, it automatically resumes.
Constraints:
-
For Aurora MySQL, valid capacity values are
1,2,4,8,16,32,64,128, and256. -
For Aurora PostgreSQL, valid capacity values are
2,4,8,16,32,64,192, and384.
Sourcepub fn seconds_before_timeout(self, input: i32) -> Self
pub fn seconds_before_timeout(self, input: i32) -> Self
The amount of time, in seconds, that Aurora Serverless v1 tries to find a scaling point to perform seamless scaling before enforcing the timeout action. The default is 300.
Specify a value between 10 and 600 seconds.
Sourcepub fn set_seconds_before_timeout(self, input: Option<i32>) -> Self
pub fn set_seconds_before_timeout(self, input: Option<i32>) -> Self
The amount of time, in seconds, that Aurora Serverless v1 tries to find a scaling point to perform seamless scaling before enforcing the timeout action. The default is 300.
Specify a value between 10 and 600 seconds.
Sourcepub fn get_seconds_before_timeout(&self) -> &Option<i32>
pub fn get_seconds_before_timeout(&self) -> &Option<i32>
The amount of time, in seconds, that Aurora Serverless v1 tries to find a scaling point to perform seamless scaling before enforcing the timeout action. The default is 300.
Specify a value between 10 and 600 seconds.
Sourcepub fn timeout_action(self, input: impl Into<String>) -> Self
pub fn timeout_action(self, input: impl Into<String>) -> Self
The action to take when the timeout is reached, either ForceApplyCapacityChange or RollbackCapacityChange.
ForceApplyCapacityChange, the default, sets the capacity to the specified value as soon as possible.
RollbackCapacityChange ignores the capacity change if a scaling point isn't found in the timeout period.
Sourcepub fn set_timeout_action(self, input: Option<String>) -> Self
pub fn set_timeout_action(self, input: Option<String>) -> Self
The action to take when the timeout is reached, either ForceApplyCapacityChange or RollbackCapacityChange.
ForceApplyCapacityChange, the default, sets the capacity to the specified value as soon as possible.
RollbackCapacityChange ignores the capacity change if a scaling point isn't found in the timeout period.
Sourcepub fn get_timeout_action(&self) -> &Option<String>
pub fn get_timeout_action(&self) -> &Option<String>
The action to take when the timeout is reached, either ForceApplyCapacityChange or RollbackCapacityChange.
ForceApplyCapacityChange, the default, sets the capacity to the specified value as soon as possible.
RollbackCapacityChange ignores the capacity change if a scaling point isn't found in the timeout period.
Trait Implementations§
Source§impl Clone for ModifyCurrentDBClusterCapacityFluentBuilder
impl Clone for ModifyCurrentDBClusterCapacityFluentBuilder
Source§fn clone(&self) -> ModifyCurrentDBClusterCapacityFluentBuilder
fn clone(&self) -> ModifyCurrentDBClusterCapacityFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ModifyCurrentDBClusterCapacityFluentBuilder
impl !RefUnwindSafe for ModifyCurrentDBClusterCapacityFluentBuilder
impl Send for ModifyCurrentDBClusterCapacityFluentBuilder
impl Sync for ModifyCurrentDBClusterCapacityFluentBuilder
impl Unpin for ModifyCurrentDBClusterCapacityFluentBuilder
impl !UnwindSafe for ModifyCurrentDBClusterCapacityFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);