#[non_exhaustive]pub struct DeleteDbInstanceInputBuilder { /* private fields */ }
Expand description
A builder for DeleteDbInstanceInput
.
Implementations§
Source§impl DeleteDbInstanceInputBuilder
impl DeleteDbInstanceInputBuilder
Sourcepub fn db_instance_identifier(self, input: impl Into<String>) -> Self
pub fn db_instance_identifier(self, input: impl Into<String>) -> Self
The DB instance identifier for the DB instance to be deleted. This parameter isn't case-sensitive.
Constraints:
-
Must match the name of an existing DB instance.
Sourcepub fn set_db_instance_identifier(self, input: Option<String>) -> Self
pub fn set_db_instance_identifier(self, input: Option<String>) -> Self
The DB instance identifier for the DB instance to be deleted. This parameter isn't case-sensitive.
Constraints:
-
Must match the name of an existing DB instance.
Sourcepub fn get_db_instance_identifier(&self) -> &Option<String>
pub fn get_db_instance_identifier(&self) -> &Option<String>
The DB instance identifier for the DB instance to be deleted. This parameter isn't case-sensitive.
Constraints:
-
Must match the name of an existing DB instance.
Sourcepub fn skip_final_snapshot(self, input: bool) -> Self
pub fn skip_final_snapshot(self, input: bool) -> Self
Specifies whether to skip the creation of a final DB snapshot before deleting the instance. If you enable this parameter, RDS doesn't create a DB snapshot. If you don't enable this parameter, RDS creates a DB snapshot before the DB instance is deleted. By default, skip isn't enabled, and the DB snapshot is created.
If you don't enable this parameter, you must specify the FinalDBSnapshotIdentifier
parameter.
When a DB instance is in a failure state and has a status of failed
, incompatible-restore
, or incompatible-network
, RDS can delete the instance only if you enable this parameter.
If you delete a read replica or an RDS Custom instance, you must enable this setting.
This setting is required for RDS Custom.
Sourcepub fn set_skip_final_snapshot(self, input: Option<bool>) -> Self
pub fn set_skip_final_snapshot(self, input: Option<bool>) -> Self
Specifies whether to skip the creation of a final DB snapshot before deleting the instance. If you enable this parameter, RDS doesn't create a DB snapshot. If you don't enable this parameter, RDS creates a DB snapshot before the DB instance is deleted. By default, skip isn't enabled, and the DB snapshot is created.
If you don't enable this parameter, you must specify the FinalDBSnapshotIdentifier
parameter.
When a DB instance is in a failure state and has a status of failed
, incompatible-restore
, or incompatible-network
, RDS can delete the instance only if you enable this parameter.
If you delete a read replica or an RDS Custom instance, you must enable this setting.
This setting is required for RDS Custom.
Sourcepub fn get_skip_final_snapshot(&self) -> &Option<bool>
pub fn get_skip_final_snapshot(&self) -> &Option<bool>
Specifies whether to skip the creation of a final DB snapshot before deleting the instance. If you enable this parameter, RDS doesn't create a DB snapshot. If you don't enable this parameter, RDS creates a DB snapshot before the DB instance is deleted. By default, skip isn't enabled, and the DB snapshot is created.
If you don't enable this parameter, you must specify the FinalDBSnapshotIdentifier
parameter.
When a DB instance is in a failure state and has a status of failed
, incompatible-restore
, or incompatible-network
, RDS can delete the instance only if you enable this parameter.
If you delete a read replica or an RDS Custom instance, you must enable this setting.
This setting is required for RDS Custom.
Sourcepub fn final_db_snapshot_identifier(self, input: impl Into<String>) -> Self
pub fn final_db_snapshot_identifier(self, input: impl Into<String>) -> Self
The DBSnapshotIdentifier
of the new DBSnapshot
created when the SkipFinalSnapshot
parameter is disabled.
If you enable this parameter and also enable SkipFinalShapshot, the command results in an error.
This setting doesn't apply to RDS Custom.
Constraints:
-
Must be 1 to 255 letters or numbers.
-
First character must be a letter.
-
Can't end with a hyphen or contain two consecutive hyphens.
-
Can't be specified when deleting a read replica.
Sourcepub fn set_final_db_snapshot_identifier(self, input: Option<String>) -> Self
pub fn set_final_db_snapshot_identifier(self, input: Option<String>) -> Self
The DBSnapshotIdentifier
of the new DBSnapshot
created when the SkipFinalSnapshot
parameter is disabled.
If you enable this parameter and also enable SkipFinalShapshot, the command results in an error.
This setting doesn't apply to RDS Custom.
Constraints:
-
Must be 1 to 255 letters or numbers.
-
First character must be a letter.
-
Can't end with a hyphen or contain two consecutive hyphens.
-
Can't be specified when deleting a read replica.
Sourcepub fn get_final_db_snapshot_identifier(&self) -> &Option<String>
pub fn get_final_db_snapshot_identifier(&self) -> &Option<String>
The DBSnapshotIdentifier
of the new DBSnapshot
created when the SkipFinalSnapshot
parameter is disabled.
If you enable this parameter and also enable SkipFinalShapshot, the command results in an error.
This setting doesn't apply to RDS Custom.
Constraints:
-
Must be 1 to 255 letters or numbers.
-
First character must be a letter.
-
Can't end with a hyphen or contain two consecutive hyphens.
-
Can't be specified when deleting a read replica.
Sourcepub fn delete_automated_backups(self, input: bool) -> Self
pub fn delete_automated_backups(self, input: bool) -> Self
Specifies whether to remove automated backups immediately after the DB instance is deleted. This parameter isn't case-sensitive. The default is to remove automated backups immediately after the DB instance is deleted.
Sourcepub fn set_delete_automated_backups(self, input: Option<bool>) -> Self
pub fn set_delete_automated_backups(self, input: Option<bool>) -> Self
Specifies whether to remove automated backups immediately after the DB instance is deleted. This parameter isn't case-sensitive. The default is to remove automated backups immediately after the DB instance is deleted.
Sourcepub fn get_delete_automated_backups(&self) -> &Option<bool>
pub fn get_delete_automated_backups(&self) -> &Option<bool>
Specifies whether to remove automated backups immediately after the DB instance is deleted. This parameter isn't case-sensitive. The default is to remove automated backups immediately after the DB instance is deleted.
Sourcepub fn build(self) -> Result<DeleteDbInstanceInput, BuildError>
pub fn build(self) -> Result<DeleteDbInstanceInput, BuildError>
Consumes the builder and constructs a DeleteDbInstanceInput
.
Source§impl DeleteDbInstanceInputBuilder
impl DeleteDbInstanceInputBuilder
Sourcepub async fn send_with(
self,
client: &Client,
) -> Result<DeleteDbInstanceOutput, SdkError<DeleteDBInstanceError, HttpResponse>>
pub async fn send_with( self, client: &Client, ) -> Result<DeleteDbInstanceOutput, SdkError<DeleteDBInstanceError, HttpResponse>>
Sends a request with this input using the given client.
Trait Implementations§
Source§impl Clone for DeleteDbInstanceInputBuilder
impl Clone for DeleteDbInstanceInputBuilder
Source§fn clone(&self) -> DeleteDbInstanceInputBuilder
fn clone(&self) -> DeleteDbInstanceInputBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for DeleteDbInstanceInputBuilder
impl Debug for DeleteDbInstanceInputBuilder
Source§impl Default for DeleteDbInstanceInputBuilder
impl Default for DeleteDbInstanceInputBuilder
Source§fn default() -> DeleteDbInstanceInputBuilder
fn default() -> DeleteDbInstanceInputBuilder
Source§impl PartialEq for DeleteDbInstanceInputBuilder
impl PartialEq for DeleteDbInstanceInputBuilder
Source§fn eq(&self, other: &DeleteDbInstanceInputBuilder) -> bool
fn eq(&self, other: &DeleteDbInstanceInputBuilder) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for DeleteDbInstanceInputBuilder
Auto Trait Implementations§
impl Freeze for DeleteDbInstanceInputBuilder
impl RefUnwindSafe for DeleteDbInstanceInputBuilder
impl Send for DeleteDbInstanceInputBuilder
impl Sync for DeleteDbInstanceInputBuilder
impl Unpin for DeleteDbInstanceInputBuilder
impl UnwindSafe for DeleteDbInstanceInputBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);