Struct aws_sdk_rds::operation::modify_db_cluster_parameter_group::builders::ModifyDBClusterParameterGroupFluentBuilder
source · pub struct ModifyDBClusterParameterGroupFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ModifyDBClusterParameterGroup.
Modifies the parameters of a DB cluster parameter group. To modify more than one parameter, submit a list of the following: ParameterName, ParameterValue, and ApplyMethod. A maximum of 20 parameters can be modified in a single request.
After you create a DB cluster parameter group, you should wait at least 5 minutes before creating your first DB cluster that uses that DB cluster parameter group as the default parameter group. This allows Amazon RDS to fully complete the create operation before the parameter group is used as the default for a new DB cluster. This is especially important for parameters that are critical when creating the default database for a DB cluster, such as the character set for the default database defined by the character_set_database parameter. You can use the Parameter Groups option of the Amazon RDS console or the DescribeDBClusterParameters operation to verify that your DB cluster parameter group has been created or modified.
If the modified DB cluster parameter group is used by an Aurora Serverless v1 cluster, Aurora applies the update immediately. The cluster restart might interrupt your workload. In that case, your application must reopen any connections and retry any transactions that were active when the parameter changes took effect.
For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.
For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide.
Implementations§
source§impl ModifyDBClusterParameterGroupFluentBuilder
impl ModifyDBClusterParameterGroupFluentBuilder
sourcepub fn as_input(&self) -> &ModifyDbClusterParameterGroupInputBuilder
pub fn as_input(&self) -> &ModifyDbClusterParameterGroupInputBuilder
Access the ModifyDBClusterParameterGroup as a reference.
sourcepub async fn send(
self,
) -> Result<ModifyDbClusterParameterGroupOutput, SdkError<ModifyDBClusterParameterGroupError, HttpResponse>>
pub async fn send( self, ) -> Result<ModifyDbClusterParameterGroupOutput, SdkError<ModifyDBClusterParameterGroupError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn customize(
self,
) -> CustomizableOperation<ModifyDbClusterParameterGroupOutput, ModifyDBClusterParameterGroupError, Self>
pub fn customize( self, ) -> CustomizableOperation<ModifyDbClusterParameterGroupOutput, ModifyDBClusterParameterGroupError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
sourcepub fn db_cluster_parameter_group_name(self, input: impl Into<String>) -> Self
pub fn db_cluster_parameter_group_name(self, input: impl Into<String>) -> Self
The name of the DB cluster parameter group to modify.
sourcepub fn set_db_cluster_parameter_group_name(self, input: Option<String>) -> Self
pub fn set_db_cluster_parameter_group_name(self, input: Option<String>) -> Self
The name of the DB cluster parameter group to modify.
sourcepub fn get_db_cluster_parameter_group_name(&self) -> &Option<String>
pub fn get_db_cluster_parameter_group_name(&self) -> &Option<String>
The name of the DB cluster parameter group to modify.
sourcepub fn parameters(self, input: Parameter) -> Self
pub fn parameters(self, input: Parameter) -> Self
Appends an item to Parameters.
To override the contents of this collection use set_parameters.
A list of parameters in the DB cluster parameter group to modify.
Valid Values (for the application method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters.
When the application method is immediate, changes to dynamic parameters are applied immediately to the DB clusters associated with the parameter group. When the application method is pending-reboot, changes to dynamic and static parameters are applied after a reboot without failover to the DB clusters associated with the parameter group.
sourcepub fn set_parameters(self, input: Option<Vec<Parameter>>) -> Self
pub fn set_parameters(self, input: Option<Vec<Parameter>>) -> Self
A list of parameters in the DB cluster parameter group to modify.
Valid Values (for the application method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters.
When the application method is immediate, changes to dynamic parameters are applied immediately to the DB clusters associated with the parameter group. When the application method is pending-reboot, changes to dynamic and static parameters are applied after a reboot without failover to the DB clusters associated with the parameter group.
sourcepub fn get_parameters(&self) -> &Option<Vec<Parameter>>
pub fn get_parameters(&self) -> &Option<Vec<Parameter>>
A list of parameters in the DB cluster parameter group to modify.
Valid Values (for the application method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters.
When the application method is immediate, changes to dynamic parameters are applied immediately to the DB clusters associated with the parameter group. When the application method is pending-reboot, changes to dynamic and static parameters are applied after a reboot without failover to the DB clusters associated with the parameter group.
Trait Implementations§
source§impl Clone for ModifyDBClusterParameterGroupFluentBuilder
impl Clone for ModifyDBClusterParameterGroupFluentBuilder
source§fn clone(&self) -> ModifyDBClusterParameterGroupFluentBuilder
fn clone(&self) -> ModifyDBClusterParameterGroupFluentBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ModifyDBClusterParameterGroupFluentBuilder
impl !RefUnwindSafe for ModifyDBClusterParameterGroupFluentBuilder
impl Send for ModifyDBClusterParameterGroupFluentBuilder
impl Sync for ModifyDBClusterParameterGroupFluentBuilder
impl Unpin for ModifyDBClusterParameterGroupFluentBuilder
impl !UnwindSafe for ModifyDBClusterParameterGroupFluentBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);