pub struct ResetDBParameterGroupFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ResetDBParameterGroup.
Modifies the parameters of a DB parameter group to the engine/system default value. To reset specific parameters, provide a list of the following: ParameterName and ApplyMethod. To reset the entire DB parameter group, specify the DBParameterGroup name and ResetAllParameters parameters. When resetting the entire group, dynamic parameters are updated immediately and static parameters are set to pending-reboot to take effect on the next DB instance restart or RebootDBInstance request.
Implementations§
Source§impl ResetDBParameterGroupFluentBuilder
impl ResetDBParameterGroupFluentBuilder
Sourcepub fn as_input(&self) -> &ResetDbParameterGroupInputBuilder
pub fn as_input(&self) -> &ResetDbParameterGroupInputBuilder
Access the ResetDBParameterGroup as a reference.
Sourcepub async fn send(
self,
) -> Result<ResetDbParameterGroupOutput, SdkError<ResetDBParameterGroupError, HttpResponse>>
pub async fn send( self, ) -> Result<ResetDbParameterGroupOutput, SdkError<ResetDBParameterGroupError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ResetDbParameterGroupOutput, ResetDBParameterGroupError, Self>
pub fn customize( self, ) -> CustomizableOperation<ResetDbParameterGroupOutput, ResetDBParameterGroupError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn db_parameter_group_name(self, input: impl Into<String>) -> Self
pub fn db_parameter_group_name(self, input: impl Into<String>) -> Self
The name of the DB parameter group.
Constraints:
-
Must match the name of an existing
DBParameterGroup.
Sourcepub fn set_db_parameter_group_name(self, input: Option<String>) -> Self
pub fn set_db_parameter_group_name(self, input: Option<String>) -> Self
The name of the DB parameter group.
Constraints:
-
Must match the name of an existing
DBParameterGroup.
Sourcepub fn get_db_parameter_group_name(&self) -> &Option<String>
pub fn get_db_parameter_group_name(&self) -> &Option<String>
The name of the DB parameter group.
Constraints:
-
Must match the name of an existing
DBParameterGroup.
Sourcepub fn reset_all_parameters(self, input: bool) -> Self
pub fn reset_all_parameters(self, input: bool) -> Self
Specifies whether to reset all parameters in the DB parameter group to default values. By default, all parameters in the DB parameter group are reset to default values.
Sourcepub fn set_reset_all_parameters(self, input: Option<bool>) -> Self
pub fn set_reset_all_parameters(self, input: Option<bool>) -> Self
Specifies whether to reset all parameters in the DB parameter group to default values. By default, all parameters in the DB parameter group are reset to default values.
Sourcepub fn get_reset_all_parameters(&self) -> &Option<bool>
pub fn get_reset_all_parameters(&self) -> &Option<bool>
Specifies whether to reset all parameters in the DB parameter group to default values. By default, all parameters in the DB parameter group are reset to default values.
Sourcepub fn parameters(self, input: Parameter) -> Self
pub fn parameters(self, input: Parameter) -> Self
Appends an item to Parameters.
To override the contents of this collection use set_parameters.
To reset the entire DB parameter group, specify the DBParameterGroup name and ResetAllParameters parameters. To reset specific parameters, provide a list of the following: ParameterName and ApplyMethod. A maximum of 20 parameters can be modified in a single request.
MySQL
Valid Values (for Apply method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters, and changes are applied when DB instance reboots.
MariaDB
Valid Values (for Apply method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters, and changes are applied when DB instance reboots.
Oracle
Valid Values (for Apply method): pending-reboot
Sourcepub fn set_parameters(self, input: Option<Vec<Parameter>>) -> Self
pub fn set_parameters(self, input: Option<Vec<Parameter>>) -> Self
To reset the entire DB parameter group, specify the DBParameterGroup name and ResetAllParameters parameters. To reset specific parameters, provide a list of the following: ParameterName and ApplyMethod. A maximum of 20 parameters can be modified in a single request.
MySQL
Valid Values (for Apply method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters, and changes are applied when DB instance reboots.
MariaDB
Valid Values (for Apply method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters, and changes are applied when DB instance reboots.
Oracle
Valid Values (for Apply method): pending-reboot
Sourcepub fn get_parameters(&self) -> &Option<Vec<Parameter>>
pub fn get_parameters(&self) -> &Option<Vec<Parameter>>
To reset the entire DB parameter group, specify the DBParameterGroup name and ResetAllParameters parameters. To reset specific parameters, provide a list of the following: ParameterName and ApplyMethod. A maximum of 20 parameters can be modified in a single request.
MySQL
Valid Values (for Apply method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters, and changes are applied when DB instance reboots.
MariaDB
Valid Values (for Apply method): immediate | pending-reboot
You can use the immediate value with dynamic parameters only. You can use the pending-reboot value for both dynamic and static parameters, and changes are applied when DB instance reboots.
Oracle
Valid Values (for Apply method): pending-reboot
Trait Implementations§
Source§impl Clone for ResetDBParameterGroupFluentBuilder
impl Clone for ResetDBParameterGroupFluentBuilder
Source§fn clone(&self) -> ResetDBParameterGroupFluentBuilder
fn clone(&self) -> ResetDBParameterGroupFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ResetDBParameterGroupFluentBuilder
impl !RefUnwindSafe for ResetDBParameterGroupFluentBuilder
impl Send for ResetDBParameterGroupFluentBuilder
impl Sync for ResetDBParameterGroupFluentBuilder
impl Unpin for ResetDBParameterGroupFluentBuilder
impl !UnwindSafe for ResetDBParameterGroupFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);