pub struct RebootDBInstanceFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to RebootDBInstance.
You might need to reboot your DB instance, usually for maintenance reasons. For example, if you make certain modifications, or if you change the DB parameter group associated with the DB instance, you must reboot the instance for the changes to take effect.
Rebooting a DB instance restarts the database engine service. Rebooting a DB instance results in a momentary outage, during which the DB instance status is set to rebooting.
For more information about rebooting, see Rebooting a DB Instance in the Amazon RDS User Guide.
This command doesn't apply to RDS Custom.
If your DB instance is part of a Multi-AZ DB cluster, you can reboot the DB cluster with the RebootDBCluster operation.
Implementations§
Source§impl RebootDBInstanceFluentBuilder
impl RebootDBInstanceFluentBuilder
Sourcepub fn as_input(&self) -> &RebootDbInstanceInputBuilder
pub fn as_input(&self) -> &RebootDbInstanceInputBuilder
Access the RebootDBInstance as a reference.
Sourcepub async fn send(
self,
) -> Result<RebootDbInstanceOutput, SdkError<RebootDBInstanceError, HttpResponse>>
pub async fn send( self, ) -> Result<RebootDbInstanceOutput, SdkError<RebootDBInstanceError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<RebootDbInstanceOutput, RebootDBInstanceError, Self>
pub fn customize( self, ) -> CustomizableOperation<RebootDbInstanceOutput, RebootDBInstanceError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn db_instance_identifier(self, input: impl Into<String>) -> Self
pub fn db_instance_identifier(self, input: impl Into<String>) -> Self
The DB instance identifier. This parameter is stored as a lowercase string.
Constraints:
-
Must match the identifier of an existing DBInstance.
Sourcepub fn set_db_instance_identifier(self, input: Option<String>) -> Self
pub fn set_db_instance_identifier(self, input: Option<String>) -> Self
The DB instance identifier. This parameter is stored as a lowercase string.
Constraints:
-
Must match the identifier of an existing DBInstance.
Sourcepub fn get_db_instance_identifier(&self) -> &Option<String>
pub fn get_db_instance_identifier(&self) -> &Option<String>
The DB instance identifier. This parameter is stored as a lowercase string.
Constraints:
-
Must match the identifier of an existing DBInstance.
Sourcepub fn force_failover(self, input: bool) -> Self
pub fn force_failover(self, input: bool) -> Self
Specifies whether the reboot is conducted through a Multi-AZ failover.
Constraint: You can't enable force failover if the instance isn't configured for Multi-AZ.
Sourcepub fn set_force_failover(self, input: Option<bool>) -> Self
pub fn set_force_failover(self, input: Option<bool>) -> Self
Specifies whether the reboot is conducted through a Multi-AZ failover.
Constraint: You can't enable force failover if the instance isn't configured for Multi-AZ.
Sourcepub fn get_force_failover(&self) -> &Option<bool>
pub fn get_force_failover(&self) -> &Option<bool>
Specifies whether the reboot is conducted through a Multi-AZ failover.
Constraint: You can't enable force failover if the instance isn't configured for Multi-AZ.
Trait Implementations§
Source§impl Clone for RebootDBInstanceFluentBuilder
impl Clone for RebootDBInstanceFluentBuilder
Source§fn clone(&self) -> RebootDBInstanceFluentBuilder
fn clone(&self) -> RebootDBInstanceFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for RebootDBInstanceFluentBuilder
impl !RefUnwindSafe for RebootDBInstanceFluentBuilder
impl Send for RebootDBInstanceFluentBuilder
impl Sync for RebootDBInstanceFluentBuilder
impl Unpin for RebootDBInstanceFluentBuilder
impl !UnwindSafe for RebootDBInstanceFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);