Struct LedgerEncryptionDescriptionBuilder

Source

#[non_exhaustive]
pub struct LedgerEncryptionDescriptionBuilder { /* private fields */ }

Expand description

A builder for LedgerEncryptionDescription.

Implementations§

Source §

impl LedgerEncryptionDescriptionBuilder

Source

pub fn kms_key_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the customer managed KMS key that the ledger uses for encryption at rest. If this parameter is undefined, the ledger uses an Amazon Web Services owned KMS key for encryption. It will display AWS_OWNED_KMS_KEY when updating the ledger's encryption configuration to the Amazon Web Services owned KMS key.

This field is required.

Source

pub fn set_kms_key_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the customer managed KMS key that the ledger uses for encryption at rest. If this parameter is undefined, the ledger uses an Amazon Web Services owned KMS key for encryption. It will display AWS_OWNED_KMS_KEY when updating the ledger's encryption configuration to the Amazon Web Services owned KMS key.

Source

pub fn get_kms_key_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the customer managed KMS key that the ledger uses for encryption at rest. If this parameter is undefined, the ledger uses an Amazon Web Services owned KMS key for encryption. It will display AWS_OWNED_KMS_KEY when updating the ledger's encryption configuration to the Amazon Web Services owned KMS key.

Source

pub fn encryption_status(self, input: EncryptionStatus) -> Self

The current state of encryption at rest for the ledger. This can be one of the following values:

ENABLED: Encryption is fully enabled using the specified key.
UPDATING: The ledger is actively processing the specified key change.

Key changes in QLDB are asynchronous. The ledger is fully accessible without any performance impact while the key change is being processed. The amount of time it takes to update a key varies depending on the ledger size.
KMS_KEY_INACCESSIBLE: The specified customer managed KMS key is not accessible, and the ledger is impaired. Either the key was disabled or deleted, or the grants on the key were revoked. When a ledger is impaired, it is not accessible and does not accept any read or write requests.

An impaired ledger automatically returns to an active state after you restore the grants on the key, or re-enable the key that was disabled. However, deleting a customer managed KMS key is irreversible. After a key is deleted, you can no longer access the ledgers that are protected with that key, and the data becomes unrecoverable permanently.

This field is required.

Source

pub fn set_encryption_status(self, input: Option<EncryptionStatus>) -> Self

The current state of encryption at rest for the ledger. This can be one of the following values:

ENABLED: Encryption is fully enabled using the specified key.
UPDATING: The ledger is actively processing the specified key change.

Key changes in QLDB are asynchronous. The ledger is fully accessible without any performance impact while the key change is being processed. The amount of time it takes to update a key varies depending on the ledger size.
KMS_KEY_INACCESSIBLE: The specified customer managed KMS key is not accessible, and the ledger is impaired. Either the key was disabled or deleted, or the grants on the key were revoked. When a ledger is impaired, it is not accessible and does not accept any read or write requests.

An impaired ledger automatically returns to an active state after you restore the grants on the key, or re-enable the key that was disabled. However, deleting a customer managed KMS key is irreversible. After a key is deleted, you can no longer access the ledgers that are protected with that key, and the data becomes unrecoverable permanently.

Source

pub fn get_encryption_status(&self) -> &Option<EncryptionStatus>

The current state of encryption at rest for the ledger. This can be one of the following values:

ENABLED: Encryption is fully enabled using the specified key.
UPDATING: The ledger is actively processing the specified key change.

Key changes in QLDB are asynchronous. The ledger is fully accessible without any performance impact while the key change is being processed. The amount of time it takes to update a key varies depending on the ledger size.
KMS_KEY_INACCESSIBLE: The specified customer managed KMS key is not accessible, and the ledger is impaired. Either the key was disabled or deleted, or the grants on the key were revoked. When a ledger is impaired, it is not accessible and does not accept any read or write requests.

An impaired ledger automatically returns to an active state after you restore the grants on the key, or re-enable the key that was disabled. However, deleting a customer managed KMS key is irreversible. After a key is deleted, you can no longer access the ledgers that are protected with that key, and the data becomes unrecoverable permanently.

Source

pub fn inaccessible_kms_key_date_time(self, input: DateTime) -> Self

The date and time, in epoch time format, when the KMS key first became inaccessible, in the case of an error. (Epoch time format is the number of seconds that have elapsed since 12:00:00 AM January 1, 1970 UTC.)

This parameter is undefined if the KMS key is accessible.

Source

pub fn set_inaccessible_kms_key_date_time(self, input: Option<DateTime>) -> Self

The date and time, in epoch time format, when the KMS key first became inaccessible, in the case of an error. (Epoch time format is the number of seconds that have elapsed since 12:00:00 AM January 1, 1970 UTC.)

This parameter is undefined if the KMS key is accessible.

Source

pub fn get_inaccessible_kms_key_date_time(&self) -> &Option<DateTime>

The date and time, in epoch time format, when the KMS key first became inaccessible, in the case of an error. (Epoch time format is the number of seconds that have elapsed since 12:00:00 AM January 1, 1970 UTC.)

This parameter is undefined if the KMS key is accessible.

Source

pub fn build(self) -> Result<LedgerEncryptionDescription, BuildError>

Consumes the builder and constructs a LedgerEncryptionDescription. This method will fail if any of the following fields are not set:

Trait Implementations§

Source §

impl Clone for LedgerEncryptionDescriptionBuilder

Source §

fn clone(&self) -> LedgerEncryptionDescriptionBuilder

Returns a duplicate of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

Source §

impl Debug for LedgerEncryptionDescriptionBuilder

Source §

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Source §

impl Default for LedgerEncryptionDescriptionBuilder

Source §

fn default() -> LedgerEncryptionDescriptionBuilder

Returns the “default value” for a type. Read more

Source §

impl PartialEq for LedgerEncryptionDescriptionBuilder

Source §

fn eq(&self, other: &LedgerEncryptionDescriptionBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

Source §

impl StructuralPartialEq for LedgerEncryptionDescriptionBuilder

Auto Trait Implementations§

§

impl UnwindSafe for LedgerEncryptionDescriptionBuilder

Blanket Implementations§

Source §

impl<T> Any for T
where T: 'static + ?Sized,

Source §

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

Source §

impl<T> Borrow<T> for T
where T: ?Sized,

Source §

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

Source §

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source §

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

Source §

impl<T> CloneToUninit for T
where T: Clone,

Source §

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

Source §

impl<T> From<T> for T

Source §

fn from(t: T) -> T

Returns the argument unchanged.

Source §

impl<T> Instrument for T

Source §

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Source §

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Source §

impl<T, U> Into for T
where U: From<T>,

Source §

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source §

impl<T> IntoEither for T

Source §

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source §

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

Source §

impl<T> Paint for T
where T: ?Sized,

Source §

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

Source §

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example

println!("{}", value.primary());

Source §

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example

println!("{}", value.fixed(color));

Source §

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example

println!("{}", value.rgb(r, g, b));

Source §

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example

println!("{}", value.black());

Source §

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example

println!("{}", value.red());

Source §

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example

println!("{}", value.green());

Source §

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example

println!("{}", value.yellow());

Source §

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example

println!("{}", value.blue());

Source §

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example

println!("{}", value.magenta());

Source §

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example

println!("{}", value.cyan());

Source §

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example

println!("{}", value.white());

Source §

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example

println!("{}", value.bright_black());

Source §

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example

println!("{}", value.bright_red());

Source §

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example

println!("{}", value.bright_green());

Source §

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example

println!("{}", value.bright_yellow());

Source §

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example

println!("{}", value.bright_blue());

Source §

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.bright_magenta());

Source §

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example

println!("{}", value.bright_cyan());

Source §

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example

println!("{}", value.bright_white());

Source §

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

Source §

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example

println!("{}", value.on_primary());

Source §

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example

println!("{}", value.on_fixed(color));

Source §

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example

println!("{}", value.on_rgb(r, g, b));

Source §

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example

println!("{}", value.on_black());

Source §

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example

println!("{}", value.on_red());

Source §

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example

println!("{}", value.on_green());

Source §

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example

println!("{}", value.on_yellow());

Source §

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example

println!("{}", value.on_blue());

Source §

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example

println!("{}", value.on_magenta());

Source §

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example

println!("{}", value.on_cyan());

Source §

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example

println!("{}", value.on_white());

Source §

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example

println!("{}", value.on_bright_black());

Source §

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example

println!("{}", value.on_bright_red());

Source §

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example

println!("{}", value.on_bright_green());

Source §

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example

println!("{}", value.on_bright_yellow());

Source §

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example

println!("{}", value.on_bright_blue());

Source §

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.on_bright_magenta());

Source §

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example

println!("{}", value.on_bright_cyan());

Source §

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example

println!("{}", value.on_bright_white());

Source §

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

Source §

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example

println!("{}", value.bold());

Source §

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example

println!("{}", value.dim());

Source §

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example

println!("{}", value.italic());

Source §

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example

println!("{}", value.underline());

Source §

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Blink].

§Example

println!("{}", value.blink());

Source §

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example

println!("{}", value.rapid_blink());

Source §

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example

println!("{}", value.invert());

Source §

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example

println!("{}", value.conceal());

Source §

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example

println!("{}", value.strike());

Source §

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

Source §

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example

println!("{}", value.mask());

Source §

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example

println!("{}", value.wrap());

Source §

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example

println!("{}", value.linger());

Source §

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example

println!("{}", value.clear());

Source §

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example

println!("{}", value.resetting());

Source §

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example

println!("{}", value.bright());

Source §

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example

println!("{}", value.on_bright());

Source §

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

Source §

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

Source §

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

Source §

impl<T> Same for T

Source §

type Output = T

Should always be Self

Source §

impl<T> ToOwned for T
where T: Clone,

Source §

type Owned = T

The resulting type after obtaining ownership.

Source §

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

Source §

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

Source §

impl<T, U> TryFrom for T
where U: Into<T>,

Source §

type Error = Infallible

The type returned in the event of a conversion error.

Source §

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

Source §

impl<T, U> TryInto for T
where U: TryFrom<T>,

Source §

type Error = >::Error

The type returned in the event of a conversion error.

Source §

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Source §

impl<T> WithSubscriber for T

Source §

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

LedgerEncryptionDescriptionBuilder

Struct LedgerEncryptionDescriptionBuilder Copy item path

Implementations§

impl LedgerEncryptionDescriptionBuilder

pub fn kms_key_arn(self, input: impl Into<String>) -> Self

pub fn set_kms_key_arn(self, input: Option<String>) -> Self

pub fn get_kms_key_arn(&self) -> &Option<String>

pub fn encryption_status(self, input: EncryptionStatus) -> Self

pub fn set_encryption_status(self, input: Option<EncryptionStatus>) -> Self

pub fn get_encryption_status(&self) -> &Option<EncryptionStatus>

pub fn inaccessible_kms_key_date_time(self, input: DateTime) -> Self

pub fn set_inaccessible_kms_key_date_time(self, input: Option<DateTime>) -> Self

pub fn get_inaccessible_kms_key_date_time(&self) -> &Option<DateTime>

pub fn build(self) -> Result<LedgerEncryptionDescription, BuildError>

Trait Implementations§

impl Clone for LedgerEncryptionDescriptionBuilder

fn clone(&self) -> LedgerEncryptionDescriptionBuilder

fn clone_from(&mut self, source: &Self)

impl Debug for LedgerEncryptionDescriptionBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Default for LedgerEncryptionDescriptionBuilder

fn default() -> LedgerEncryptionDescriptionBuilder

impl PartialEq for LedgerEncryptionDescriptionBuilder

fn eq(&self, other: &LedgerEncryptionDescriptionBuilder) -> bool

fn ne(&self, other: &Rhs) -> bool

impl StructuralPartialEq for LedgerEncryptionDescriptionBuilder

Auto Trait Implementations§

impl Freeze for LedgerEncryptionDescriptionBuilder

impl RefUnwindSafe for LedgerEncryptionDescriptionBuilder

impl Send for LedgerEncryptionDescriptionBuilder

impl Sync for LedgerEncryptionDescriptionBuilder

impl Unpin for LedgerEncryptionDescriptionBuilder

impl UnwindSafe for LedgerEncryptionDescriptionBuilder

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> CloneToUninit for Twhere T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

impl<T> From<T> for T

fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unsharedwhere Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

impl<T> Paint for Twhere T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

§Example

fn primary(&self) -> Painted<&T>

§Example

fn fixed(&self, color: u8) -> Painted<&T>

§Example

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

§Example

fn black(&self) -> Painted<&T>

§Example

fn red(&self) -> Painted<&T>

§Example

fn green(&self) -> Painted<&T>

§Example

fn yellow(&self) -> Painted<&T>

§Example

fn blue(&self) -> Painted<&T>

§Example

fn magenta(&self) -> Painted<&T>

§Example

fn cyan(&self) -> Painted<&T>

§Example

fn white(&self) -> Painted<&T>

§Example

fn bright_black(&self) -> Painted<&T>

Struct LedgerEncryptionDescriptionBuilder

impl<T> Any for T
where T: 'static + ?Sized,

impl<T> Borrow<T> for T
where T: ?Sized,

impl<T> BorrowMut<T> for T
where T: ?Sized,

impl<T> CloneToUninit for T
where T: Clone,

impl<T, U> Into<U> for T
where U: From<T>,

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

impl<T> Paint for T
where T: ?Sized,