#[non_exhaustive]pub struct UpdateLedgerPermissionsModeInput {
pub name: Option<String>,
pub permissions_mode: Option<PermissionsMode>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.name: Option<String>
The name of the ledger.
permissions_mode: Option<PermissionsMode>
The permissions mode to assign to the ledger. This parameter can have one of the following values:
-
ALLOW_ALL
: A legacy permissions mode that enables access control with API-level granularity for ledgers.This mode allows users who have the
SendCommand
API permission for this ledger to run all PartiQL commands (hence,ALLOW_ALL
) on any tables in the specified ledger. This mode disregards any table-level or command-level IAM permissions policies that you create for the ledger. -
STANDARD
: (Recommended) A permissions mode that enables access control with finer granularity for ledgers, tables, and PartiQL commands.By default, this mode denies all user requests to run any PartiQL commands on any tables in this ledger. To allow PartiQL commands to run, you must create IAM permissions policies for specific table resources and PartiQL actions, in addition to the
SendCommand
API permission for the ledger. For information, see Getting started with the standard permissions mode in the Amazon QLDB Developer Guide.
We strongly recommend using the STANDARD
permissions mode to maximize the security of your ledger data.
Implementations§
Source§impl UpdateLedgerPermissionsModeInput
impl UpdateLedgerPermissionsModeInput
Sourcepub fn permissions_mode(&self) -> Option<&PermissionsMode>
pub fn permissions_mode(&self) -> Option<&PermissionsMode>
The permissions mode to assign to the ledger. This parameter can have one of the following values:
-
ALLOW_ALL
: A legacy permissions mode that enables access control with API-level granularity for ledgers.This mode allows users who have the
SendCommand
API permission for this ledger to run all PartiQL commands (hence,ALLOW_ALL
) on any tables in the specified ledger. This mode disregards any table-level or command-level IAM permissions policies that you create for the ledger. -
STANDARD
: (Recommended) A permissions mode that enables access control with finer granularity for ledgers, tables, and PartiQL commands.By default, this mode denies all user requests to run any PartiQL commands on any tables in this ledger. To allow PartiQL commands to run, you must create IAM permissions policies for specific table resources and PartiQL actions, in addition to the
SendCommand
API permission for the ledger. For information, see Getting started with the standard permissions mode in the Amazon QLDB Developer Guide.
We strongly recommend using the STANDARD
permissions mode to maximize the security of your ledger data.
Source§impl UpdateLedgerPermissionsModeInput
impl UpdateLedgerPermissionsModeInput
Sourcepub fn builder() -> UpdateLedgerPermissionsModeInputBuilder
pub fn builder() -> UpdateLedgerPermissionsModeInputBuilder
Creates a new builder-style object to manufacture UpdateLedgerPermissionsModeInput
.
Trait Implementations§
Source§impl Clone for UpdateLedgerPermissionsModeInput
impl Clone for UpdateLedgerPermissionsModeInput
Source§fn clone(&self) -> UpdateLedgerPermissionsModeInput
fn clone(&self) -> UpdateLedgerPermissionsModeInput
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl PartialEq for UpdateLedgerPermissionsModeInput
impl PartialEq for UpdateLedgerPermissionsModeInput
Source§fn eq(&self, other: &UpdateLedgerPermissionsModeInput) -> bool
fn eq(&self, other: &UpdateLedgerPermissionsModeInput) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for UpdateLedgerPermissionsModeInput
Auto Trait Implementations§
impl Freeze for UpdateLedgerPermissionsModeInput
impl RefUnwindSafe for UpdateLedgerPermissionsModeInput
impl Send for UpdateLedgerPermissionsModeInput
impl Sync for UpdateLedgerPermissionsModeInput
impl Unpin for UpdateLedgerPermissionsModeInput
impl UnwindSafe for UpdateLedgerPermissionsModeInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);