pub struct CreateDatasetGroupFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateDatasetGroup.
Creates an empty dataset group. A dataset group is a container for Amazon Personalize resources. A dataset group can contain at most three datasets, one for each type of dataset:
-
Item interactions
-
Items
-
Users
-
Actions
-
Action interactions
A dataset group can be a Domain dataset group, where you specify a domain and use pre-configured resources like recommenders, or a Custom dataset group, where you use custom resources, such as a solution with a solution version, that you deploy with a campaign. If you start with a Domain dataset group, you can still add custom resources such as solutions and solution versions trained with recipes for custom use cases and deployed with campaigns.
A dataset group can be in one of the following states:
-
CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED
-
DELETE PENDING
To get the status of the dataset group, call DescribeDatasetGroup. If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the creation failed.
You must wait until the status of the dataset group is ACTIVE before adding a dataset to the group.
You can specify an Key Management Service (KMS) key to encrypt the datasets in the group. If you specify a KMS key, you must also include an Identity and Access Management (IAM) role that has permission to access the key.
APIs that require a dataset group ARN in the request
Related APIs
Implementations§
Source§impl CreateDatasetGroupFluentBuilder
impl CreateDatasetGroupFluentBuilder
Sourcepub fn as_input(&self) -> &CreateDatasetGroupInputBuilder
pub fn as_input(&self) -> &CreateDatasetGroupInputBuilder
Access the CreateDatasetGroup as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateDatasetGroupOutput, SdkError<CreateDatasetGroupError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateDatasetGroupOutput, SdkError<CreateDatasetGroupError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateDatasetGroupOutput, CreateDatasetGroupError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateDatasetGroupOutput, CreateDatasetGroupError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn role_arn(self, input: impl Into<String>) -> Self
pub fn role_arn(self, input: impl Into<String>) -> Self
The ARN of the Identity and Access Management (IAM) role that has permissions to access the Key Management Service (KMS) key. Supplying an IAM role is only valid when also specifying a KMS key.
Sourcepub fn set_role_arn(self, input: Option<String>) -> Self
pub fn set_role_arn(self, input: Option<String>) -> Self
The ARN of the Identity and Access Management (IAM) role that has permissions to access the Key Management Service (KMS) key. Supplying an IAM role is only valid when also specifying a KMS key.
Sourcepub fn get_role_arn(&self) -> &Option<String>
pub fn get_role_arn(&self) -> &Option<String>
The ARN of the Identity and Access Management (IAM) role that has permissions to access the Key Management Service (KMS) key. Supplying an IAM role is only valid when also specifying a KMS key.
Sourcepub fn kms_key_arn(self, input: impl Into<String>) -> Self
pub fn kms_key_arn(self, input: impl Into<String>) -> Self
The Amazon Resource Name (ARN) of a Key Management Service (KMS) key used to encrypt the datasets.
Sourcepub fn set_kms_key_arn(self, input: Option<String>) -> Self
pub fn set_kms_key_arn(self, input: Option<String>) -> Self
The Amazon Resource Name (ARN) of a Key Management Service (KMS) key used to encrypt the datasets.
Sourcepub fn get_kms_key_arn(&self) -> &Option<String>
pub fn get_kms_key_arn(&self) -> &Option<String>
The Amazon Resource Name (ARN) of a Key Management Service (KMS) key used to encrypt the datasets.
Sourcepub fn domain(self, input: Domain) -> Self
pub fn domain(self, input: Domain) -> Self
The domain of the dataset group. Specify a domain to create a Domain dataset group. The domain you specify determines the default schemas for datasets and the use cases available for recommenders. If you don't specify a domain, you create a Custom dataset group with solution versions that you deploy with a campaign.
Sourcepub fn set_domain(self, input: Option<Domain>) -> Self
pub fn set_domain(self, input: Option<Domain>) -> Self
The domain of the dataset group. Specify a domain to create a Domain dataset group. The domain you specify determines the default schemas for datasets and the use cases available for recommenders. If you don't specify a domain, you create a Custom dataset group with solution versions that you deploy with a campaign.
Sourcepub fn get_domain(&self) -> &Option<Domain>
pub fn get_domain(&self) -> &Option<Domain>
The domain of the dataset group. Specify a domain to create a Domain dataset group. The domain you specify determines the default schemas for datasets and the use cases available for recommenders. If you don't specify a domain, you create a Custom dataset group with solution versions that you deploy with a campaign.
A list of tags to apply to the dataset group.
A list of tags to apply to the dataset group.
Trait Implementations§
Source§impl Clone for CreateDatasetGroupFluentBuilder
impl Clone for CreateDatasetGroupFluentBuilder
Source§fn clone(&self) -> CreateDatasetGroupFluentBuilder
fn clone(&self) -> CreateDatasetGroupFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateDatasetGroupFluentBuilder
impl !RefUnwindSafe for CreateDatasetGroupFluentBuilder
impl Send for CreateDatasetGroupFluentBuilder
impl Sync for CreateDatasetGroupFluentBuilder
impl Unpin for CreateDatasetGroupFluentBuilder
impl !UnwindSafe for CreateDatasetGroupFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);