UpdateSiteRackPhysicalPropertiesInput

aws_sdk_outposts::operation::update_site_rack_physical_properties

Struct UpdateSiteRackPhysicalPropertiesInput 

Source 
#[non_exhaustive]
pub struct UpdateSiteRackPhysicalPropertiesInput {
    pub site_id: Option<String>,
    pub power_draw_kva: Option<PowerDrawKva>,
    pub power_phase: Option<PowerPhase>,
    pub power_connector: Option<PowerConnector>,
    pub power_feed_drop: Option<PowerFeedDrop>,
    pub uplink_gbps: Option<UplinkGbps>,
    pub uplink_count: Option<UplinkCount>,
    pub fiber_optic_cable_type: Option<FiberOpticCableType>,
    pub optical_standard: Option<OpticalStandard>,
    pub maximum_supported_weight_lbs: Option<MaximumSupportedWeightLbs>,
}

Fields (Non-exhaustive)§

This struct is marked as non-exhaustive
Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.
§site_id: Option<String>

The ID or the Amazon Resource Name (ARN) of the site.

§power_draw_kva: Option<PowerDrawKva>

The power draw, in kVA, available at the hardware placement position for the rack.

§power_phase: Option<PowerPhase>

The power option that you can provide for hardware.

  • Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz

  • Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

§power_connector: Option<PowerConnector>

The power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

  • Single-phase AC feed

    • L6-30P – (common in US); 30A; single phase

    • IEC309 (blue) – P+N+E, 6hr; 32 A; single phase

  • Three-phase AC feed

    • AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase

    • AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

    • CS8365C – (common in US); 3P+E, 50A; three phase

§power_feed_drop: Option<PowerFeedDrop>

Indicates whether the power feed comes above or below the rack.

§uplink_gbps: Option<UplinkGbps>

The uplink speed the rack should support for the connection to the Region.

§uplink_count: Option<UplinkCount>

Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

  • 1Gbps - Uplinks available: 1, 2, 4, 6, 8

  • 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16

  • 40 and 100 Gbps- Uplinks available: 1, 2, 4

§fiber_optic_cable_type: Option<FiberOpticCableType>

The type of fiber that you will use to attach the Outpost to your network.

§optical_standard: Option<OpticalStandard>

The type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

  • OPTIC_10GBASE_SR: 10GBASE-SR

  • OPTIC_10GBASE_IR: 10GBASE-IR

  • OPTIC_10GBASE_LR: 10GBASE-LR

  • OPTIC_40GBASE_SR: 40GBASE-SR

  • OPTIC_40GBASE_ESR: 40GBASE-ESR

  • OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)

  • OPTIC_40GBASE_LR4: 40GBASE-LR4

  • OPTIC_100GBASE_SR4: 100GBASE-SR4

  • OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4

  • OPTIC_100GBASE_LR4: 100GBASE-LR4

  • OPTIC_100G_PSM4_MSA: 100G PSM4 MSA

  • OPTIC_1000BASE_LX: 1000Base-LX

  • OPTIC_1000BASE_SX : 1000Base-SX

§maximum_supported_weight_lbs: Option<MaximumSupportedWeightLbs>

The maximum rack weight that this site can support. NO_LIMIT is over 2000lbs.

Implementations§

Source§

impl UpdateSiteRackPhysicalPropertiesInput

Source

pub fn site_id(&self) -> Option<&str>

The ID or the Amazon Resource Name (ARN) of the site.

Source

pub fn power_draw_kva(&self) -> Option<&PowerDrawKva>

The power draw, in kVA, available at the hardware placement position for the rack.

Source

pub fn power_phase(&self) -> Option<&PowerPhase>

The power option that you can provide for hardware.

  • Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz

  • Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

Source

pub fn power_connector(&self) -> Option<&PowerConnector>

The power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

  • Single-phase AC feed

    • L6-30P – (common in US); 30A; single phase

    • IEC309 (blue) – P+N+E, 6hr; 32 A; single phase

  • Three-phase AC feed

    • AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase

    • AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

    • CS8365C – (common in US); 3P+E, 50A; three phase

Source

pub fn power_feed_drop(&self) -> Option<&PowerFeedDrop>

Indicates whether the power feed comes above or below the rack.

The uplink speed the rack should support for the connection to the Region.

Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

  • 1Gbps - Uplinks available: 1, 2, 4, 6, 8

  • 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16

  • 40 and 100 Gbps- Uplinks available: 1, 2, 4

Source

pub fn fiber_optic_cable_type(&self) -> Option<&FiberOpticCableType>

The type of fiber that you will use to attach the Outpost to your network.

Source

pub fn optical_standard(&self) -> Option<&OpticalStandard>

The type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

  • OPTIC_10GBASE_SR: 10GBASE-SR

  • OPTIC_10GBASE_IR: 10GBASE-IR

  • OPTIC_10GBASE_LR: 10GBASE-LR

  • OPTIC_40GBASE_SR: 40GBASE-SR

  • OPTIC_40GBASE_ESR: 40GBASE-ESR

  • OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)

  • OPTIC_40GBASE_LR4: 40GBASE-LR4

  • OPTIC_100GBASE_SR4: 100GBASE-SR4

  • OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4

  • OPTIC_100GBASE_LR4: 100GBASE-LR4

  • OPTIC_100G_PSM4_MSA: 100G PSM4 MSA

  • OPTIC_1000BASE_LX: 1000Base-LX

  • OPTIC_1000BASE_SX : 1000Base-SX

Source

pub fn maximum_supported_weight_lbs(&self) -> Option<&MaximumSupportedWeightLbs>

The maximum rack weight that this site can support. NO_LIMIT is over 2000lbs.

Source§

impl UpdateSiteRackPhysicalPropertiesInput

Source

pub fn builder() -> UpdateSiteRackPhysicalPropertiesInputBuilder

Creates a new builder-style object to manufacture UpdateSiteRackPhysicalPropertiesInput.

Trait Implementations§

Source§

impl Clone for UpdateSiteRackPhysicalPropertiesInput

Source§

fn clone(&self) -> UpdateSiteRackPhysicalPropertiesInput

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for UpdateSiteRackPhysicalPropertiesInput

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl PartialEq for UpdateSiteRackPhysicalPropertiesInput

Source§

fn eq(&self, other: &UpdateSiteRackPhysicalPropertiesInput) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for UpdateSiteRackPhysicalPropertiesInput

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,