Struct aws_sdk_outposts::input::UpdateSiteRackPhysicalPropertiesInput

#[non_exhaustive]
pub struct UpdateSiteRackPhysicalPropertiesInput {
    pub site_id: Option<String>,
    pub power_draw_kva: Option<PowerDrawKva>,
    pub power_phase: Option<PowerPhase>,
    pub power_connector: Option<PowerConnector>,
    pub power_feed_drop: Option<PowerFeedDrop>,
    pub uplink_gbps: Option<UplinkGbps>,
    pub uplink_count: Option<UplinkCount>,
    pub fiber_optic_cable_type: Option<FiberOpticCableType>,
    pub optical_standard: Option<OpticalStandard>,
    pub maximum_supported_weight_lbs: Option<MaximumSupportedWeightLbs>,
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

site_id: Option<String>

The ID or the Amazon Resource Name (ARN) of the site.

power_draw_kva: Option<PowerDrawKva>

Specify in kVA the power draw available at the hardware placement position for the rack.

power_phase: Option<PowerPhase>

Specify the power option that you can provide for hardware.

• Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz

• Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

power_connector: Option<PowerConnector>

Specify the power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

• Single-phase AC feed

  • L6-30P – (common in US); 30A; single phase

  • IEC309 (blue) – P+N+E, 6hr; 32 A; single phase

• Three-phase AC feed

  • AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase

  • AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

power_feed_drop: Option<PowerFeedDrop>

Specify whether the power feed comes above or below the rack.

uplink_gbps: Option<UplinkGbps>

Specify the uplink speed the rack should support for the connection to the Region.

uplink_count: Option<UplinkCount>

Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

• 1Gbps - Uplinks available: 1, 2, 4, 6, 8

• 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16

• 40 and 100 Gbps- Uplinks available: 1, 2, 4

fiber_optic_cable_type: Option<FiberOpticCableType>

Specify the type of fiber that you will use to attach the Outpost to your network.

optical_standard: Option<OpticalStandard>

Specify the type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

• OPTIC_10GBASE_SR: 10GBASE-SR

• OPTIC_10GBASE_IR: 10GBASE-IR

• OPTIC_10GBASE_LR: 10GBASE-LR

• OPTIC_40GBASE_SR: 40GBASE-SR

• OPTIC_40GBASE_ESR: 40GBASE-ESR

• OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)

• OPTIC_40GBASE_LR4: 40GBASE-LR4

• OPTIC_100GBASE_SR4: 100GBASE-SR4

• OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4

• OPTIC_100GBASE_LR4: 100GBASE-LR4

• OPTIC_100G_PSM4_MSA: 100G PSM4 MSA

• OPTIC_1000BASE_LX: 1000Base-LX

• OPTIC_1000BASE_SX : 1000Base-SX

maximum_supported_weight_lbs: Option<MaximumSupportedWeightLbs>

Specify the maximum rack weight that this site can support. NO_LIMIT is over 2000lbs.

Implementations

impl UpdateSiteRackPhysicalPropertiesInput

pub async fn make_operation(
    &self,
    _config: &Config
) -> Result<Operation<UpdateSiteRackPhysicalProperties, AwsErrorRetryPolicy>, BuildError>

Consumes the builder and constructs an Operation<UpdateSiteRackPhysicalProperties>

pub fn builder() -> Builder

Creates a new builder-style object to manufacture UpdateSiteRackPhysicalPropertiesInput

impl UpdateSiteRackPhysicalPropertiesInput

pub fn site_id(&self) -> Option<&str>

The ID or the Amazon Resource Name (ARN) of the site.

pub fn power_draw_kva(&self) -> Option<&PowerDrawKva>

Specify in kVA the power draw available at the hardware placement position for the rack.

pub fn power_phase(&self) -> Option<&PowerPhase>

Specify the power option that you can provide for hardware.

• Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz

• Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

pub fn power_connector(&self) -> Option<&PowerConnector>

Specify the power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

• Single-phase AC feed

  • L6-30P – (common in US); 30A; single phase

  • IEC309 (blue) – P+N+E, 6hr; 32 A; single phase

• Three-phase AC feed

  • AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase

  • AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

pub fn power_feed_drop(&self) -> Option<&PowerFeedDrop>

Specify whether the power feed comes above or below the rack.

pub fn uplink_gbps(&self) -> Option<&UplinkGbps>

Specify the uplink speed the rack should support for the connection to the Region.

pub fn uplink_count(&self) -> Option<&UplinkCount>

Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

• 1Gbps - Uplinks available: 1, 2, 4, 6, 8

• 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16

• 40 and 100 Gbps- Uplinks available: 1, 2, 4

pub fn fiber_optic_cable_type(&self) -> Option<&FiberOpticCableType>

Specify the type of fiber that you will use to attach the Outpost to your network.

pub fn optical_standard(&self) -> Option<&OpticalStandard>

Specify the type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

• OPTIC_10GBASE_SR: 10GBASE-SR

• OPTIC_10GBASE_IR: 10GBASE-IR

• OPTIC_10GBASE_LR: 10GBASE-LR

• OPTIC_40GBASE_SR: 40GBASE-SR

• OPTIC_40GBASE_ESR: 40GBASE-ESR

• OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)

• OPTIC_40GBASE_LR4: 40GBASE-LR4

• OPTIC_100GBASE_SR4: 100GBASE-SR4

• OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4

• OPTIC_100GBASE_LR4: 100GBASE-LR4

• OPTIC_100G_PSM4_MSA: 100G PSM4 MSA

• OPTIC_1000BASE_LX: 1000Base-LX

• OPTIC_1000BASE_SX : 1000Base-SX

pub fn maximum_supported_weight_lbs(&self) -> Option<&MaximumSupportedWeightLbs>

Specify the maximum rack weight that this site can support. NO_LIMIT is over 2000lbs.

Trait Implementations

impl Clone for UpdateSiteRackPhysicalPropertiesInput

fn clone(&self) -> UpdateSiteRackPhysicalPropertiesInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UpdateSiteRackPhysicalPropertiesInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq<UpdateSiteRackPhysicalPropertiesInput> for UpdateSiteRackPhysicalPropertiesInput

fn eq(&self, other: &UpdateSiteRackPhysicalPropertiesInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &UpdateSiteRackPhysicalPropertiesInput) -> bool

This method tests for !=.

impl StructuralPartialEq for UpdateSiteRackPhysicalPropertiesInput