Struct aws_sdk_outposts::client::fluent_builders::UpdateSiteRackPhysicalProperties

pub struct UpdateSiteRackPhysicalProperties { /* private fields */ }

Fluent builder constructing a request to UpdateSiteRackPhysicalProperties.

Update the physical and logistical details for a rack at a site. For more information about hardware requirements for racks, see Network readiness checklist in the Amazon Web Services Outposts User Guide.

To update a rack at a site with an order of IN_PROGRESS, you must wait for the order to complete or cancel the order.

Implementations

impl UpdateSiteRackPhysicalProperties

pub async fn customize(
    self
) -> Result<CustomizableOperation<UpdateSiteRackPhysicalProperties, AwsResponseRetryClassifier>, SdkError<UpdateSiteRackPhysicalPropertiesError>>

Consume this builder, creating a customizable operation that can be modified before being sent. The operation’s inner http::Request can be modified as well.

pub async fn send(
    self
) -> Result<UpdateSiteRackPhysicalPropertiesOutput, SdkError<UpdateSiteRackPhysicalPropertiesError>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn site_id(self, input: impl Into<String>) -> Self

The ID or the Amazon Resource Name (ARN) of the site.

In requests, Amazon Web Services Outposts accepts the Amazon Resource Name (ARN) or an ID for Outposts and sites throughout the Outposts Query API. To address backwards compatibility, the parameter names OutpostID or SiteID remain in use. Despite the parameter name, you can make the request with an ARN.

pub fn set_site_id(self, input: Option<String>) -> Self

The ID or the Amazon Resource Name (ARN) of the site.

In requests, Amazon Web Services Outposts accepts the Amazon Resource Name (ARN) or an ID for Outposts and sites throughout the Outposts Query API. To address backwards compatibility, the parameter names OutpostID or SiteID remain in use. Despite the parameter name, you can make the request with an ARN.

pub fn power_draw_kva(self, input: PowerDrawKva) -> Self

Specify in kVA the power draw available at the hardware placement position for the rack.

pub fn set_power_draw_kva(self, input: Option<PowerDrawKva>) -> Self

Specify in kVA the power draw available at the hardware placement position for the rack.

pub fn power_phase(self, input: PowerPhase) -> Self

Specify the power option that you can provide for hardware.

• Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz

• Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

pub fn set_power_phase(self, input: Option<PowerPhase>) -> Self

Specify the power option that you can provide for hardware.

• Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz

• Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz

pub fn power_connector(self, input: PowerConnector) -> Self

Specify the power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

• Single-phase AC feed

  • L6-30P – (common in US); 30A; single phase

  • IEC309 (blue) – P+N+E, 6hr; 32 A; single phase

• Three-phase AC feed

  • AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase

  • AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

pub fn set_power_connector(self, input: Option<PowerConnector>) -> Self

Specify the power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector.

• Single-phase AC feed

  • L6-30P – (common in US); 30A; single phase

  • IEC309 (blue) – P+N+E, 6hr; 32 A; single phase

• Three-phase AC feed

  • AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase

  • AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase

pub fn power_feed_drop(self, input: PowerFeedDrop) -> Self

Specify whether the power feed comes above or below the rack.

pub fn set_power_feed_drop(self, input: Option<PowerFeedDrop>) -> Self

Specify whether the power feed comes above or below the rack.

pub fn uplink_gbps(self, input: UplinkGbps) -> Self

Specify the uplink speed the rack should support for the connection to the Region.

pub fn set_uplink_gbps(self, input: Option<UplinkGbps>) -> Self

Specify the uplink speed the rack should support for the connection to the Region.

pub fn uplink_count(self, input: UplinkCount) -> Self

Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

• 1Gbps - Uplinks available: 1, 2, 4, 6, 8

• 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16

• 40 and 100 Gbps- Uplinks available: 1, 2, 4

pub fn set_uplink_count(self, input: Option<UplinkCount>) -> Self

Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount.

• 1Gbps - Uplinks available: 1, 2, 4, 6, 8

• 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16

• 40 and 100 Gbps- Uplinks available: 1, 2, 4

pub fn fiber_optic_cable_type(self, input: FiberOpticCableType) -> Self

Specify the type of fiber that you will use to attach the Outpost to your network.

pub fn set_fiber_optic_cable_type(
    self,
    input: Option<FiberOpticCableType>
) -> Self

Specify the type of fiber that you will use to attach the Outpost to your network.

pub fn optical_standard(self, input: OpticalStandard) -> Self

Specify the type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

• OPTIC_10GBASE_SR: 10GBASE-SR

• OPTIC_10GBASE_IR: 10GBASE-IR

• OPTIC_10GBASE_LR: 10GBASE-LR

• OPTIC_40GBASE_SR: 40GBASE-SR

• OPTIC_40GBASE_ESR: 40GBASE-ESR

• OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)

• OPTIC_40GBASE_LR4: 40GBASE-LR4

• OPTIC_100GBASE_SR4: 100GBASE-SR4

• OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4

• OPTIC_100GBASE_LR4: 100GBASE-LR4

• OPTIC_100G_PSM4_MSA: 100G PSM4 MSA

• OPTIC_1000BASE_LX: 1000Base-LX

• OPTIC_1000BASE_SX : 1000Base-SX

pub fn set_optical_standard(self, input: Option<OpticalStandard>) -> Self

Specify the type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide.

• OPTIC_10GBASE_SR: 10GBASE-SR

• OPTIC_10GBASE_IR: 10GBASE-IR

• OPTIC_10GBASE_LR: 10GBASE-LR

• OPTIC_40GBASE_SR: 40GBASE-SR

• OPTIC_40GBASE_ESR: 40GBASE-ESR

• OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L)

• OPTIC_40GBASE_LR4: 40GBASE-LR4

• OPTIC_100GBASE_SR4: 100GBASE-SR4

• OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4

• OPTIC_100GBASE_LR4: 100GBASE-LR4

• OPTIC_100G_PSM4_MSA: 100G PSM4 MSA

• OPTIC_1000BASE_LX: 1000Base-LX

• OPTIC_1000BASE_SX : 1000Base-SX

pub fn maximum_supported_weight_lbs(
    self,
    input: MaximumSupportedWeightLbs
) -> Self

Specify the maximum rack weight that this site can support. NO_LIMIT is over 2000lbs.

pub fn set_maximum_supported_weight_lbs(
    self,
    input: Option<MaximumSupportedWeightLbs>
) -> Self

Specify the maximum rack weight that this site can support. NO_LIMIT is over 2000lbs.

Trait Implementations

impl Clone for UpdateSiteRackPhysicalProperties

fn clone(&self) -> UpdateSiteRackPhysicalProperties

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UpdateSiteRackPhysicalProperties

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.