CreateServerFluentBuilder

aws_sdk_opsworkscm::operation::create_server::builders

Struct CreateServerFluentBuilder 

Source 
pub struct CreateServerFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to CreateServer.

Creates and immedately starts a new server. The server is ready to use when it is in the HEALTHY state. By default, you can create a maximum of 10 servers.

This operation is asynchronous.

A LimitExceededException is thrown when you have created the maximum number of servers (10). A ResourceAlreadyExistsException is thrown when a server with the same name already exists in the account. A ResourceNotFoundException is thrown when you specify a backup ID that is not valid or is for a backup that does not exist. A ValidationException is thrown when parameters of the request are not valid.

If you do not specify a security group by adding the SecurityGroupIds parameter, OpsWorks creates a new security group.

Chef Automate: The default security group opens the Chef server to the world on TCP port 443. If a KeyName is present, OpsWorks enables SSH access. SSH is also open to the world on TCP port 22.

Puppet Enterprise: The default security group opens TCP ports 22, 443, 4433, 8140, 8142, 8143, and 8170. If a KeyName is present, OpsWorks enables SSH access. SSH is also open to the world on TCP port 22.

By default, your server is accessible from any IP address. We recommend that you update your security group rules to allow access from known IP addresses and address ranges only. To edit security group rules, open Security Groups in the navigation pane of the EC2 management console.

To specify your own domain for a server, and provide your own self-signed or CA-signed certificate and private key, specify values for CustomDomain, CustomCertificate, and CustomPrivateKey.

Implementations§

Source§

impl CreateServerFluentBuilder

Source

pub fn as_input(&self) -> &CreateServerInputBuilder

Access the CreateServer as a reference.

Source

pub async fn send( self, ) -> Result<CreateServerOutput, SdkError<CreateServerError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

Source

pub fn customize( self, ) -> CustomizableOperation<CreateServerOutput, CreateServerError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

Source

pub fn associate_public_ip_address(self, input: bool) -> Self

Associate a public IP address with a server that you are launching. Valid values are true or false. The default value is true.

Source

pub fn set_associate_public_ip_address(self, input: Option<bool>) -> Self

Associate a public IP address with a server that you are launching. Valid values are true or false. The default value is true.

Source

pub fn get_associate_public_ip_address(&self) -> &Option<bool>

Associate a public IP address with a server that you are launching. Valid values are true or false. The default value is true.

Source

pub fn custom_domain(self, input: impl Into<String>) -> Self

An optional public endpoint of a server, such as https://aws.my-company.com. To access the server, create a CNAME DNS record in your preferred DNS service that points the custom domain to the endpoint that is generated when the server is created (the value of the CreateServer Endpoint attribute). You cannot access the server by using the generated Endpoint value if the server is using a custom domain. If you specify a custom domain, you must also specify values for CustomCertificate and CustomPrivateKey.

Source

pub fn set_custom_domain(self, input: Option<String>) -> Self

An optional public endpoint of a server, such as https://aws.my-company.com. To access the server, create a CNAME DNS record in your preferred DNS service that points the custom domain to the endpoint that is generated when the server is created (the value of the CreateServer Endpoint attribute). You cannot access the server by using the generated Endpoint value if the server is using a custom domain. If you specify a custom domain, you must also specify values for CustomCertificate and CustomPrivateKey.

Source

pub fn get_custom_domain(&self) -> &Option<String>

An optional public endpoint of a server, such as https://aws.my-company.com. To access the server, create a CNAME DNS record in your preferred DNS service that points the custom domain to the endpoint that is generated when the server is created (the value of the CreateServer Endpoint attribute). You cannot access the server by using the generated Endpoint value if the server is using a custom domain. If you specify a custom domain, you must also specify values for CustomCertificate and CustomPrivateKey.

Source

pub fn custom_certificate(self, input: impl Into<String>) -> Self

A PEM-formatted HTTPS certificate. The value can be be a single, self-signed certificate, or a certificate chain. If you specify a custom certificate, you must also specify values for CustomDomain and CustomPrivateKey. The following are requirements for the CustomCertificate value:

  • You can provide either a self-signed, custom certificate, or the full certificate chain.

  • The certificate must be a valid X509 certificate, or a certificate chain in PEM format.

  • The certificate must be valid at the time of upload. A certificate can't be used before its validity period begins (the certificate's NotBefore date), or after it expires (the certificate's NotAfter date).

  • The certificate’s common name or subject alternative names (SANs), if present, must match the value of CustomDomain.

  • The certificate must match the value of CustomPrivateKey.

Source

pub fn set_custom_certificate(self, input: Option<String>) -> Self

A PEM-formatted HTTPS certificate. The value can be be a single, self-signed certificate, or a certificate chain. If you specify a custom certificate, you must also specify values for CustomDomain and CustomPrivateKey. The following are requirements for the CustomCertificate value:

  • You can provide either a self-signed, custom certificate, or the full certificate chain.

  • The certificate must be a valid X509 certificate, or a certificate chain in PEM format.

  • The certificate must be valid at the time of upload. A certificate can't be used before its validity period begins (the certificate's NotBefore date), or after it expires (the certificate's NotAfter date).

  • The certificate’s common name or subject alternative names (SANs), if present, must match the value of CustomDomain.

  • The certificate must match the value of CustomPrivateKey.

Source

pub fn get_custom_certificate(&self) -> &Option<String>

A PEM-formatted HTTPS certificate. The value can be be a single, self-signed certificate, or a certificate chain. If you specify a custom certificate, you must also specify values for CustomDomain and CustomPrivateKey. The following are requirements for the CustomCertificate value:

  • You can provide either a self-signed, custom certificate, or the full certificate chain.

  • The certificate must be a valid X509 certificate, or a certificate chain in PEM format.

  • The certificate must be valid at the time of upload. A certificate can't be used before its validity period begins (the certificate's NotBefore date), or after it expires (the certificate's NotAfter date).

  • The certificate’s common name or subject alternative names (SANs), if present, must match the value of CustomDomain.

  • The certificate must match the value of CustomPrivateKey.

Source

pub fn custom_private_key(self, input: impl Into<String>) -> Self

A private key in PEM format for connecting to the server by using HTTPS. The private key must not be encrypted; it cannot be protected by a password or passphrase. If you specify a custom private key, you must also specify values for CustomDomain and CustomCertificate.

Source

pub fn set_custom_private_key(self, input: Option<String>) -> Self

A private key in PEM format for connecting to the server by using HTTPS. The private key must not be encrypted; it cannot be protected by a password or passphrase. If you specify a custom private key, you must also specify values for CustomDomain and CustomCertificate.

Source

pub fn get_custom_private_key(&self) -> &Option<String>

A private key in PEM format for connecting to the server by using HTTPS. The private key must not be encrypted; it cannot be protected by a password or passphrase. If you specify a custom private key, you must also specify values for CustomDomain and CustomCertificate.

Source

pub fn disable_automated_backup(self, input: bool) -> Self

Enable or disable scheduled backups. Valid values are true or false. The default value is true.

Source

pub fn set_disable_automated_backup(self, input: Option<bool>) -> Self

Enable or disable scheduled backups. Valid values are true or false. The default value is true.

Source

pub fn get_disable_automated_backup(&self) -> &Option<bool>

Enable or disable scheduled backups. Valid values are true or false. The default value is true.

Source

pub fn engine(self, input: impl Into<String>) -> Self

The configuration management engine to use. Valid values include ChefAutomate and Puppet.

Source

pub fn set_engine(self, input: Option<String>) -> Self

The configuration management engine to use. Valid values include ChefAutomate and Puppet.

Source

pub fn get_engine(&self) -> &Option<String>

The configuration management engine to use. Valid values include ChefAutomate and Puppet.

Source

pub fn engine_model(self, input: impl Into<String>) -> Self

The engine model of the server. Valid values in this release include Monolithic for Puppet and Single for Chef.

Source

pub fn set_engine_model(self, input: Option<String>) -> Self

The engine model of the server. Valid values in this release include Monolithic for Puppet and Single for Chef.

Source

pub fn get_engine_model(&self) -> &Option<String>

The engine model of the server. Valid values in this release include Monolithic for Puppet and Single for Chef.

Source

pub fn engine_version(self, input: impl Into<String>) -> Self

The major release version of the engine that you want to use. For a Chef server, the valid value for EngineVersion is currently 2. For a Puppet server, valid values are 2019 or 2017.

Source

pub fn set_engine_version(self, input: Option<String>) -> Self

The major release version of the engine that you want to use. For a Chef server, the valid value for EngineVersion is currently 2. For a Puppet server, valid values are 2019 or 2017.

Source

pub fn get_engine_version(&self) -> &Option<String>

The major release version of the engine that you want to use. For a Chef server, the valid value for EngineVersion is currently 2. For a Puppet server, valid values are 2019 or 2017.

Source

pub fn engine_attributes(self, input: EngineAttribute) -> Self

Appends an item to EngineAttributes.

To override the contents of this collection use set_engine_attributes.

Optional engine attributes on a specified server.

Attributes accepted in a Chef createServer request:

  • CHEF_AUTOMATE_PIVOTAL_KEY: A base64-encoded RSA public key. The corresponding private key is required to access the Chef API. When no CHEF_AUTOMATE_PIVOTAL_KEY is set, a private key is generated and returned in the response.

  • CHEF_AUTOMATE_ADMIN_PASSWORD: The password for the administrative user in the Chef Automate web-based dashboard. The password length is a minimum of eight characters, and a maximum of 32. The password can contain letters, numbers, and special characters (!/@#$%^&+=_). The password must contain at least one lower case letter, one upper case letter, one number, and one special character. When no CHEF_AUTOMATE_ADMIN_PASSWORD is set, one is generated and returned in the response.

Attributes accepted in a Puppet createServer request:

  • PUPPET_ADMIN_PASSWORD: To work with the Puppet Enterprise console, a password must use ASCII characters.

  • PUPPET_R10K_REMOTE: The r10k remote is the URL of your control repository (for example, ssh://git@your.git-repo.com:user/control-repo.git). Specifying an r10k remote opens TCP port 8170.

  • PUPPET_R10K_PRIVATE_KEY: If you are using a private Git repository, add PUPPET_R10K_PRIVATE_KEY to specify a PEM-encoded private SSH key.

Source

pub fn set_engine_attributes(self, input: Option<Vec<EngineAttribute>>) -> Self

Optional engine attributes on a specified server.

Attributes accepted in a Chef createServer request:

  • CHEF_AUTOMATE_PIVOTAL_KEY: A base64-encoded RSA public key. The corresponding private key is required to access the Chef API. When no CHEF_AUTOMATE_PIVOTAL_KEY is set, a private key is generated and returned in the response.

  • CHEF_AUTOMATE_ADMIN_PASSWORD: The password for the administrative user in the Chef Automate web-based dashboard. The password length is a minimum of eight characters, and a maximum of 32. The password can contain letters, numbers, and special characters (!/@#$%^&+=_). The password must contain at least one lower case letter, one upper case letter, one number, and one special character. When no CHEF_AUTOMATE_ADMIN_PASSWORD is set, one is generated and returned in the response.

Attributes accepted in a Puppet createServer request:

  • PUPPET_ADMIN_PASSWORD: To work with the Puppet Enterprise console, a password must use ASCII characters.

  • PUPPET_R10K_REMOTE: The r10k remote is the URL of your control repository (for example, ssh://git@your.git-repo.com:user/control-repo.git). Specifying an r10k remote opens TCP port 8170.

  • PUPPET_R10K_PRIVATE_KEY: If you are using a private Git repository, add PUPPET_R10K_PRIVATE_KEY to specify a PEM-encoded private SSH key.

Source

pub fn get_engine_attributes(&self) -> &Option<Vec<EngineAttribute>>

Optional engine attributes on a specified server.

Attributes accepted in a Chef createServer request:

  • CHEF_AUTOMATE_PIVOTAL_KEY: A base64-encoded RSA public key. The corresponding private key is required to access the Chef API. When no CHEF_AUTOMATE_PIVOTAL_KEY is set, a private key is generated and returned in the response.

  • CHEF_AUTOMATE_ADMIN_PASSWORD: The password for the administrative user in the Chef Automate web-based dashboard. The password length is a minimum of eight characters, and a maximum of 32. The password can contain letters, numbers, and special characters (!/@#$%^&+=_). The password must contain at least one lower case letter, one upper case letter, one number, and one special character. When no CHEF_AUTOMATE_ADMIN_PASSWORD is set, one is generated and returned in the response.

Attributes accepted in a Puppet createServer request:

  • PUPPET_ADMIN_PASSWORD: To work with the Puppet Enterprise console, a password must use ASCII characters.

  • PUPPET_R10K_REMOTE: The r10k remote is the URL of your control repository (for example, ssh://git@your.git-repo.com:user/control-repo.git). Specifying an r10k remote opens TCP port 8170.

  • PUPPET_R10K_PRIVATE_KEY: If you are using a private Git repository, add PUPPET_R10K_PRIVATE_KEY to specify a PEM-encoded private SSH key.

Source

pub fn backup_retention_count(self, input: i32) -> Self

The number of automated backups that you want to keep. Whenever a new backup is created, OpsWorks CM deletes the oldest backups if this number is exceeded. The default value is 1.

Source

pub fn set_backup_retention_count(self, input: Option<i32>) -> Self

The number of automated backups that you want to keep. Whenever a new backup is created, OpsWorks CM deletes the oldest backups if this number is exceeded. The default value is 1.

Source

pub fn get_backup_retention_count(&self) -> &Option<i32>

The number of automated backups that you want to keep. Whenever a new backup is created, OpsWorks CM deletes the oldest backups if this number is exceeded. The default value is 1.

Source

pub fn server_name(self, input: impl Into<String>) -> Self

The name of the server. The server name must be unique within your Amazon Web Services account, within each region. Server names must start with a letter; then letters, numbers, or hyphens (-) are allowed, up to a maximum of 40 characters.

Source

pub fn set_server_name(self, input: Option<String>) -> Self

The name of the server. The server name must be unique within your Amazon Web Services account, within each region. Server names must start with a letter; then letters, numbers, or hyphens (-) are allowed, up to a maximum of 40 characters.

Source

pub fn get_server_name(&self) -> &Option<String>

The name of the server. The server name must be unique within your Amazon Web Services account, within each region. Server names must start with a letter; then letters, numbers, or hyphens (-) are allowed, up to a maximum of 40 characters.

Source

pub fn instance_profile_arn(self, input: impl Into<String>) -> Self

The ARN of the instance profile that your Amazon EC2 instances use. The OpsWorks console typically creates the instance profile for you

Source

pub fn set_instance_profile_arn(self, input: Option<String>) -> Self

The ARN of the instance profile that your Amazon EC2 instances use. The OpsWorks console typically creates the instance profile for you

Source

pub fn get_instance_profile_arn(&self) -> &Option<String>

The ARN of the instance profile that your Amazon EC2 instances use. The OpsWorks console typically creates the instance profile for you

Source

pub fn instance_type(self, input: impl Into<String>) -> Self

The Amazon EC2 instance type to use. For example, m5.large.

Source

pub fn set_instance_type(self, input: Option<String>) -> Self

The Amazon EC2 instance type to use. For example, m5.large.

Source

pub fn get_instance_type(&self) -> &Option<String>

The Amazon EC2 instance type to use. For example, m5.large.

Source

pub fn key_pair(self, input: impl Into<String>) -> Self

The Amazon EC2 key pair to set for the instance. This parameter is optional; if desired, you may specify this parameter to connect to your instances by using SSH.

Source

pub fn set_key_pair(self, input: Option<String>) -> Self

The Amazon EC2 key pair to set for the instance. This parameter is optional; if desired, you may specify this parameter to connect to your instances by using SSH.

Source

pub fn get_key_pair(&self) -> &Option<String>

The Amazon EC2 key pair to set for the instance. This parameter is optional; if desired, you may specify this parameter to connect to your instances by using SSH.

Source

pub fn preferred_maintenance_window(self, input: impl Into<String>) -> Self

The start time for a one-hour period each week during which OpsWorks CM performs maintenance on the instance. Valid values must be specified in the following format: DDD:HH:MM. MM must be specified as 00. The specified time is in coordinated universal time (UTC). The default value is a random one-hour period on Tuesday, Wednesday, or Friday. See TimeWindowDefinition for more information.

Example: Mon:08:00, which represents a start time of every Monday at 08:00 UTC. (8:00 a.m.)

Source

pub fn set_preferred_maintenance_window(self, input: Option<String>) -> Self

The start time for a one-hour period each week during which OpsWorks CM performs maintenance on the instance. Valid values must be specified in the following format: DDD:HH:MM. MM must be specified as 00. The specified time is in coordinated universal time (UTC). The default value is a random one-hour period on Tuesday, Wednesday, or Friday. See TimeWindowDefinition for more information.

Example: Mon:08:00, which represents a start time of every Monday at 08:00 UTC. (8:00 a.m.)

Source

pub fn get_preferred_maintenance_window(&self) -> &Option<String>

The start time for a one-hour period each week during which OpsWorks CM performs maintenance on the instance. Valid values must be specified in the following format: DDD:HH:MM. MM must be specified as 00. The specified time is in coordinated universal time (UTC). The default value is a random one-hour period on Tuesday, Wednesday, or Friday. See TimeWindowDefinition for more information.

Example: Mon:08:00, which represents a start time of every Monday at 08:00 UTC. (8:00 a.m.)

Source

pub fn preferred_backup_window(self, input: impl Into<String>) -> Self

The start time for a one-hour period during which OpsWorks CM backs up application-level data on your server if automated backups are enabled. Valid values must be specified in one of the following formats:

  • HH:MM for daily backups

  • DDD:HH:MM for weekly backups

MM must be specified as 00. The specified time is in coordinated universal time (UTC). The default value is a random, daily start time.

Example: 08:00, which represents a daily start time of 08:00 UTC.

Example: Mon:08:00, which represents a start time of every Monday at 08:00 UTC. (8:00 a.m.)

Source

pub fn set_preferred_backup_window(self, input: Option<String>) -> Self

The start time for a one-hour period during which OpsWorks CM backs up application-level data on your server if automated backups are enabled. Valid values must be specified in one of the following formats:

  • HH:MM for daily backups

  • DDD:HH:MM for weekly backups

MM must be specified as 00. The specified time is in coordinated universal time (UTC). The default value is a random, daily start time.

Example: 08:00, which represents a daily start time of 08:00 UTC.

Example: Mon:08:00, which represents a start time of every Monday at 08:00 UTC. (8:00 a.m.)

Source

pub fn get_preferred_backup_window(&self) -> &Option<String>

The start time for a one-hour period during which OpsWorks CM backs up application-level data on your server if automated backups are enabled. Valid values must be specified in one of the following formats:

  • HH:MM for daily backups

  • DDD:HH:MM for weekly backups

MM must be specified as 00. The specified time is in coordinated universal time (UTC). The default value is a random, daily start time.

Example: 08:00, which represents a daily start time of 08:00 UTC.

Example: Mon:08:00, which represents a start time of every Monday at 08:00 UTC. (8:00 a.m.)

Source

pub fn security_group_ids(self, input: impl Into<String>) -> Self

Appends an item to SecurityGroupIds.

To override the contents of this collection use set_security_group_ids.

A list of security group IDs to attach to the Amazon EC2 instance. If you add this parameter, the specified security groups must be within the VPC that is specified by SubnetIds.

If you do not specify this parameter, OpsWorks CM creates one new security group that uses TCP ports 22 and 443, open to 0.0.0.0/0 (everyone).

Source

pub fn set_security_group_ids(self, input: Option<Vec<String>>) -> Self

A list of security group IDs to attach to the Amazon EC2 instance. If you add this parameter, the specified security groups must be within the VPC that is specified by SubnetIds.

If you do not specify this parameter, OpsWorks CM creates one new security group that uses TCP ports 22 and 443, open to 0.0.0.0/0 (everyone).

Source

pub fn get_security_group_ids(&self) -> &Option<Vec<String>>

A list of security group IDs to attach to the Amazon EC2 instance. If you add this parameter, the specified security groups must be within the VPC that is specified by SubnetIds.

If you do not specify this parameter, OpsWorks CM creates one new security group that uses TCP ports 22 and 443, open to 0.0.0.0/0 (everyone).

Source

pub fn service_role_arn(self, input: impl Into<String>) -> Self

The service role that the OpsWorks CM service backend uses to work with your account.

Source

pub fn set_service_role_arn(self, input: Option<String>) -> Self

The service role that the OpsWorks CM service backend uses to work with your account.

Source

pub fn get_service_role_arn(&self) -> &Option<String>

The service role that the OpsWorks CM service backend uses to work with your account.

Source

pub fn subnet_ids(self, input: impl Into<String>) -> Self

Appends an item to SubnetIds.

To override the contents of this collection use set_subnet_ids.

The IDs of subnets in which to launch the server EC2 instance.

Amazon EC2-Classic customers: This field is required. All servers must run within a VPC. The VPC must have "Auto Assign Public IP" enabled.

EC2-VPC customers: This field is optional. If you do not specify subnet IDs, your EC2 instances are created in a default subnet that is selected by Amazon EC2. If you specify subnet IDs, the VPC must have "Auto Assign Public IP" enabled.

For more information about supported Amazon EC2 platforms, see Supported Platforms.

Source

pub fn set_subnet_ids(self, input: Option<Vec<String>>) -> Self

The IDs of subnets in which to launch the server EC2 instance.

Amazon EC2-Classic customers: This field is required. All servers must run within a VPC. The VPC must have "Auto Assign Public IP" enabled.

EC2-VPC customers: This field is optional. If you do not specify subnet IDs, your EC2 instances are created in a default subnet that is selected by Amazon EC2. If you specify subnet IDs, the VPC must have "Auto Assign Public IP" enabled.

For more information about supported Amazon EC2 platforms, see Supported Platforms.

Source

pub fn get_subnet_ids(&self) -> &Option<Vec<String>>

The IDs of subnets in which to launch the server EC2 instance.

Amazon EC2-Classic customers: This field is required. All servers must run within a VPC. The VPC must have "Auto Assign Public IP" enabled.

EC2-VPC customers: This field is optional. If you do not specify subnet IDs, your EC2 instances are created in a default subnet that is selected by Amazon EC2. If you specify subnet IDs, the VPC must have "Auto Assign Public IP" enabled.

For more information about supported Amazon EC2 platforms, see Supported Platforms.

Source

pub fn tags(self, input: Tag) -> Self

Appends an item to Tags.

To override the contents of this collection use set_tags.

A map that contains tag keys and tag values to attach to an OpsWorks for Chef Automate or OpsWorks for Puppet Enterprise server.

  • The key cannot be empty.

  • The key can be a maximum of 127 characters, and can contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : / @

  • The value can be a maximum 255 characters, and contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : / @

  • Leading and trailing spaces are trimmed from both the key and value.

  • A maximum of 50 user-applied tags is allowed for any OpsWorks CM server.

Source

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

A map that contains tag keys and tag values to attach to an OpsWorks for Chef Automate or OpsWorks for Puppet Enterprise server.

  • The key cannot be empty.

  • The key can be a maximum of 127 characters, and can contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : / @

  • The value can be a maximum 255 characters, and contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : / @

  • Leading and trailing spaces are trimmed from both the key and value.

  • A maximum of 50 user-applied tags is allowed for any OpsWorks CM server.

Source

pub fn get_tags(&self) -> &Option<Vec<Tag>>

A map that contains tag keys and tag values to attach to an OpsWorks for Chef Automate or OpsWorks for Puppet Enterprise server.

  • The key cannot be empty.

  • The key can be a maximum of 127 characters, and can contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : / @

  • The value can be a maximum 255 characters, and contain only Unicode letters, numbers, or separators, or the following special characters: + - = . _ : / @

  • Leading and trailing spaces are trimmed from both the key and value.

  • A maximum of 50 user-applied tags is allowed for any OpsWorks CM server.

Source

pub fn backup_id(self, input: impl Into<String>) -> Self

If you specify this field, OpsWorks CM creates the server by using the backup represented by BackupId.

Source

pub fn set_backup_id(self, input: Option<String>) -> Self

If you specify this field, OpsWorks CM creates the server by using the backup represented by BackupId.

Source

pub fn get_backup_id(&self) -> &Option<String>

If you specify this field, OpsWorks CM creates the server by using the backup represented by BackupId.

Trait Implementations§

Source§

impl Clone for CreateServerFluentBuilder

Source§

fn clone(&self) -> CreateServerFluentBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for CreateServerFluentBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,