Struct aws_sdk_opsworks::operation::clone_stack::builders::CloneStackInputBuilder

#[non_exhaustive]
pub struct CloneStackInputBuilder { /* private fields */ }

A builder for CloneStackInput.

Implementations

impl CloneStackInputBuilder

pub fn source_stack_id(self, input: impl Into<String>) -> Self

The source stack ID.

This field is required.

pub fn set_source_stack_id(self, input: Option<String>) -> Self

The source stack ID.

pub fn get_source_stack_id(&self) -> &Option<String>

The source stack ID.

pub fn name(self, input: impl Into<String>) -> Self

The cloned stack name. Stack names can be a maximum of 64 characters.

pub fn set_name(self, input: Option<String>) -> Self

The cloned stack name. Stack names can be a maximum of 64 characters.

pub fn get_name(&self) -> &Option<String>

The cloned stack name. Stack names can be a maximum of 64 characters.

pub fn region(self, input: impl Into<String>) -> Self

The cloned stack Amazon Web Services Region, such as ap-northeast-2. For more information about Amazon Web Services Regions, see Regions and Endpoints.

pub fn set_region(self, input: Option<String>) -> Self

The cloned stack Amazon Web Services Region, such as ap-northeast-2. For more information about Amazon Web Services Regions, see Regions and Endpoints.

pub fn get_region(&self) -> &Option<String>

The cloned stack Amazon Web Services Region, such as ap-northeast-2. For more information about Amazon Web Services Regions, see Regions and Endpoints.

pub fn vpc_id(self, input: impl Into<String>) -> Self

The ID of the VPC that the cloned stack is to be launched into. It must be in the specified region. All instances are launched into this VPC, and you cannot change the ID later.

• If your account supports EC2 Classic, the default value is no VPC.

• If your account does not support EC2 Classic, the default value is the default VPC for the specified region.

If the VPC ID corresponds to a default VPC and you have specified either the DefaultAvailabilityZone or the DefaultSubnetId parameter only, OpsWorks Stacks infers the value of the other parameter. If you specify neither parameter, OpsWorks Stacks sets these parameters to the first valid Availability Zone for the specified region and the corresponding default VPC subnet ID, respectively.

If you specify a nondefault VPC ID, note the following:

• It must belong to a VPC in your account that is in the specified region.

• You must specify a value for DefaultSubnetId.

For more information about how to use OpsWorks Stacks with a VPC, see Running a Stack in a VPC. For more information about default VPC and EC2 Classic, see Supported Platforms.

pub fn set_vpc_id(self, input: Option<String>) -> Self

The ID of the VPC that the cloned stack is to be launched into. It must be in the specified region. All instances are launched into this VPC, and you cannot change the ID later.

• If your account supports EC2 Classic, the default value is no VPC.

• If your account does not support EC2 Classic, the default value is the default VPC for the specified region.

If the VPC ID corresponds to a default VPC and you have specified either the DefaultAvailabilityZone or the DefaultSubnetId parameter only, OpsWorks Stacks infers the value of the other parameter. If you specify neither parameter, OpsWorks Stacks sets these parameters to the first valid Availability Zone for the specified region and the corresponding default VPC subnet ID, respectively.

If you specify a nondefault VPC ID, note the following:

• It must belong to a VPC in your account that is in the specified region.

• You must specify a value for DefaultSubnetId.

For more information about how to use OpsWorks Stacks with a VPC, see Running a Stack in a VPC. For more information about default VPC and EC2 Classic, see Supported Platforms.

pub fn get_vpc_id(&self) -> &Option<String>

The ID of the VPC that the cloned stack is to be launched into. It must be in the specified region. All instances are launched into this VPC, and you cannot change the ID later.

• If your account supports EC2 Classic, the default value is no VPC.

• If your account does not support EC2 Classic, the default value is the default VPC for the specified region.

If the VPC ID corresponds to a default VPC and you have specified either the DefaultAvailabilityZone or the DefaultSubnetId parameter only, OpsWorks Stacks infers the value of the other parameter. If you specify neither parameter, OpsWorks Stacks sets these parameters to the first valid Availability Zone for the specified region and the corresponding default VPC subnet ID, respectively.

If you specify a nondefault VPC ID, note the following:

• It must belong to a VPC in your account that is in the specified region.

• You must specify a value for DefaultSubnetId.

For more information about how to use OpsWorks Stacks with a VPC, see Running a Stack in a VPC. For more information about default VPC and EC2 Classic, see Supported Platforms.

pub fn attributes(self, k: StackAttributesKeys, v: impl Into<String>) -> Self

Adds a key-value pair to attributes.

To override the contents of this collection use set_attributes.

A list of stack attributes and values as key/value pairs to be added to the cloned stack.

pub fn set_attributes( self, input: Option<HashMap<StackAttributesKeys, String>> ) -> Self

A list of stack attributes and values as key/value pairs to be added to the cloned stack.

pub fn get_attributes(&self) -> &Option<HashMap<StackAttributesKeys, String>>

A list of stack attributes and values as key/value pairs to be added to the cloned stack.

pub fn service_role_arn(self, input: impl Into<String>) -> Self

The stack Identity and Access Management (IAM) role, which allows OpsWorks Stacks to work with Amazon Web Services resources on your behalf. You must set this parameter to the Amazon Resource Name (ARN) for an existing IAM role. If you create a stack by using the OpsWorkss Stacks console, it creates the role for you. You can obtain an existing stack's IAM ARN programmatically by calling DescribePermissions. For more information about IAM ARNs, see Using Identifiers.

You must set this parameter to a valid service role ARN or the action will fail; there is no default value. You can specify the source stack's service role ARN, if you prefer, but you must do so explicitly.

This field is required.

pub fn set_service_role_arn(self, input: Option<String>) -> Self

The stack Identity and Access Management (IAM) role, which allows OpsWorks Stacks to work with Amazon Web Services resources on your behalf. You must set this parameter to the Amazon Resource Name (ARN) for an existing IAM role. If you create a stack by using the OpsWorkss Stacks console, it creates the role for you. You can obtain an existing stack's IAM ARN programmatically by calling DescribePermissions. For more information about IAM ARNs, see Using Identifiers.

You must set this parameter to a valid service role ARN or the action will fail; there is no default value. You can specify the source stack's service role ARN, if you prefer, but you must do so explicitly.

pub fn get_service_role_arn(&self) -> &Option<String>

The stack Identity and Access Management (IAM) role, which allows OpsWorks Stacks to work with Amazon Web Services resources on your behalf. You must set this parameter to the Amazon Resource Name (ARN) for an existing IAM role. If you create a stack by using the OpsWorkss Stacks console, it creates the role for you. You can obtain an existing stack's IAM ARN programmatically by calling DescribePermissions. For more information about IAM ARNs, see Using Identifiers.

You must set this parameter to a valid service role ARN or the action will fail; there is no default value. You can specify the source stack's service role ARN, if you prefer, but you must do so explicitly.

pub fn default_instance_profile_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of an IAM profile that is the default profile for all of the stack's EC2 instances. For more information about IAM ARNs, see Using Identifiers.

pub fn set_default_instance_profile_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of an IAM profile that is the default profile for all of the stack's EC2 instances. For more information about IAM ARNs, see Using Identifiers.

pub fn get_default_instance_profile_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of an IAM profile that is the default profile for all of the stack's EC2 instances. For more information about IAM ARNs, see Using Identifiers.

pub fn default_os(self, input: impl Into<String>) -> Self

The stack's operating system, which must be set to one of the following.

• A supported Linux operating system: An Amazon Linux version, such as Amazon Linux 2, Amazon Linux 2018.03, Amazon Linux 2017.09, Amazon Linux 2017.03, Amazon Linux 2016.09, Amazon Linux 2016.03, Amazon Linux 2015.09, or Amazon Linux 2015.03.

• A supported Ubuntu operating system, such as Ubuntu 18.04 LTS, Ubuntu 16.04 LTS, Ubuntu 14.04 LTS, or Ubuntu 12.04 LTS.

• CentOS Linux 7

• Red Hat Enterprise Linux 7

• Microsoft Windows Server 2012 R2 Base, Microsoft Windows Server 2012 R2 with SQL Server Express, Microsoft Windows Server 2012 R2 with SQL Server Standard, or Microsoft Windows Server 2012 R2 with SQL Server Web.

• A custom AMI: Custom. You specify the custom AMI you want to use when you create instances. For more information about how to use custom AMIs with OpsWorks, see Using Custom AMIs.

The default option is the parent stack's operating system. Not all operating systems are supported with all versions of Chef. For more information about supported operating systems, see OpsWorks Stacks Operating Systems.

You can specify a different Linux operating system for the cloned stack, but you cannot change from Linux to Windows or Windows to Linux.

pub fn set_default_os(self, input: Option<String>) -> Self

The stack's operating system, which must be set to one of the following.

• A supported Linux operating system: An Amazon Linux version, such as Amazon Linux 2, Amazon Linux 2018.03, Amazon Linux 2017.09, Amazon Linux 2017.03, Amazon Linux 2016.09, Amazon Linux 2016.03, Amazon Linux 2015.09, or Amazon Linux 2015.03.

• A supported Ubuntu operating system, such as Ubuntu 18.04 LTS, Ubuntu 16.04 LTS, Ubuntu 14.04 LTS, or Ubuntu 12.04 LTS.

• CentOS Linux 7

• Red Hat Enterprise Linux 7

• Microsoft Windows Server 2012 R2 Base, Microsoft Windows Server 2012 R2 with SQL Server Express, Microsoft Windows Server 2012 R2 with SQL Server Standard, or Microsoft Windows Server 2012 R2 with SQL Server Web.

• A custom AMI: Custom. You specify the custom AMI you want to use when you create instances. For more information about how to use custom AMIs with OpsWorks, see Using Custom AMIs.

The default option is the parent stack's operating system. Not all operating systems are supported with all versions of Chef. For more information about supported operating systems, see OpsWorks Stacks Operating Systems.

You can specify a different Linux operating system for the cloned stack, but you cannot change from Linux to Windows or Windows to Linux.

pub fn get_default_os(&self) -> &Option<String>

The stack's operating system, which must be set to one of the following.

• A supported Linux operating system: An Amazon Linux version, such as Amazon Linux 2, Amazon Linux 2018.03, Amazon Linux 2017.09, Amazon Linux 2017.03, Amazon Linux 2016.09, Amazon Linux 2016.03, Amazon Linux 2015.09, or Amazon Linux 2015.03.

• A supported Ubuntu operating system, such as Ubuntu 18.04 LTS, Ubuntu 16.04 LTS, Ubuntu 14.04 LTS, or Ubuntu 12.04 LTS.

• CentOS Linux 7

• Red Hat Enterprise Linux 7

• Microsoft Windows Server 2012 R2 Base, Microsoft Windows Server 2012 R2 with SQL Server Express, Microsoft Windows Server 2012 R2 with SQL Server Standard, or Microsoft Windows Server 2012 R2 with SQL Server Web.

• A custom AMI: Custom. You specify the custom AMI you want to use when you create instances. For more information about how to use custom AMIs with OpsWorks, see Using Custom AMIs.

The default option is the parent stack's operating system. Not all operating systems are supported with all versions of Chef. For more information about supported operating systems, see OpsWorks Stacks Operating Systems.

You can specify a different Linux operating system for the cloned stack, but you cannot change from Linux to Windows or Windows to Linux.

pub fn hostname_theme(self, input: impl Into<String>) -> Self

The stack's host name theme, with spaces are replaced by underscores. The theme is used to generate host names for the stack's instances. By default, HostnameTheme is set to Layer_Dependent, which creates host names by appending integers to the layer's short name. The other themes are:

• Baked_Goods

• Clouds

• Europe_Cities

• Fruits

• Greek_Deities_and_Titans

• Legendary_creatures_from_Japan

• Planets_and_Moons

• Roman_Deities

• Scottish_Islands

• US_Cities

• Wild_Cats

To obtain a generated host name, call GetHostNameSuggestion, which returns a host name based on the current theme.

pub fn set_hostname_theme(self, input: Option<String>) -> Self

The stack's host name theme, with spaces are replaced by underscores. The theme is used to generate host names for the stack's instances. By default, HostnameTheme is set to Layer_Dependent, which creates host names by appending integers to the layer's short name. The other themes are:

• Baked_Goods

• Clouds

• Europe_Cities

• Fruits

• Greek_Deities_and_Titans

• Legendary_creatures_from_Japan

• Planets_and_Moons

• Roman_Deities

• Scottish_Islands

• US_Cities

• Wild_Cats

To obtain a generated host name, call GetHostNameSuggestion, which returns a host name based on the current theme.

pub fn get_hostname_theme(&self) -> &Option<String>

The stack's host name theme, with spaces are replaced by underscores. The theme is used to generate host names for the stack's instances. By default, HostnameTheme is set to Layer_Dependent, which creates host names by appending integers to the layer's short name. The other themes are:

• Baked_Goods

• Clouds

• Europe_Cities

• Fruits

• Greek_Deities_and_Titans

• Legendary_creatures_from_Japan

• Planets_and_Moons

• Roman_Deities

• Scottish_Islands

• US_Cities

• Wild_Cats

To obtain a generated host name, call GetHostNameSuggestion, which returns a host name based on the current theme.

pub fn default_availability_zone(self, input: impl Into<String>) -> Self

The cloned stack's default Availability Zone, which must be in the specified region. For more information, see Regions and Endpoints. If you also specify a value for DefaultSubnetId, the subnet must be in the same zone. For more information, see the VpcId parameter description.

pub fn set_default_availability_zone(self, input: Option<String>) -> Self

The cloned stack's default Availability Zone, which must be in the specified region. For more information, see Regions and Endpoints. If you also specify a value for DefaultSubnetId, the subnet must be in the same zone. For more information, see the VpcId parameter description.

pub fn get_default_availability_zone(&self) -> &Option<String>

The cloned stack's default Availability Zone, which must be in the specified region. For more information, see Regions and Endpoints. If you also specify a value for DefaultSubnetId, the subnet must be in the same zone. For more information, see the VpcId parameter description.

pub fn default_subnet_id(self, input: impl Into<String>) -> Self

The stack's default VPC subnet ID. This parameter is required if you specify a value for the VpcId parameter. All instances are launched into this subnet unless you specify otherwise when you create the instance. If you also specify a value for DefaultAvailabilityZone, the subnet must be in that zone. For information on default values and when this parameter is required, see the VpcId parameter description.

pub fn set_default_subnet_id(self, input: Option<String>) -> Self

The stack's default VPC subnet ID. This parameter is required if you specify a value for the VpcId parameter. All instances are launched into this subnet unless you specify otherwise when you create the instance. If you also specify a value for DefaultAvailabilityZone, the subnet must be in that zone. For information on default values and when this parameter is required, see the VpcId parameter description.

pub fn get_default_subnet_id(&self) -> &Option<String>

The stack's default VPC subnet ID. This parameter is required if you specify a value for the VpcId parameter. All instances are launched into this subnet unless you specify otherwise when you create the instance. If you also specify a value for DefaultAvailabilityZone, the subnet must be in that zone. For information on default values and when this parameter is required, see the VpcId parameter description.

pub fn custom_json(self, input: impl Into<String>) -> Self

A string that contains user-defined, custom JSON. It is used to override the corresponding default stack configuration JSON values. The string should be in the following format:

"{\"key1\": \"value1\", \"key2\": \"value2\",...}"

For more information about custom JSON, see Use Custom JSON to Modify the Stack Configuration Attributes

pub fn set_custom_json(self, input: Option<String>) -> Self

A string that contains user-defined, custom JSON. It is used to override the corresponding default stack configuration JSON values. The string should be in the following format:

"{\"key1\": \"value1\", \"key2\": \"value2\",...}"

For more information about custom JSON, see Use Custom JSON to Modify the Stack Configuration Attributes

pub fn get_custom_json(&self) -> &Option<String>

A string that contains user-defined, custom JSON. It is used to override the corresponding default stack configuration JSON values. The string should be in the following format:

"{\"key1\": \"value1\", \"key2\": \"value2\",...}"

For more information about custom JSON, see Use Custom JSON to Modify the Stack Configuration Attributes

pub fn configuration_manager(self, input: StackConfigurationManager) -> Self

The configuration manager. When you clone a stack we recommend that you use the configuration manager to specify the Chef version: 12, 11.10, or 11.4 for Linux stacks, or 12.2 for Windows stacks. The default value for Linux stacks is currently 12.

pub fn set_configuration_manager( self, input: Option<StackConfigurationManager> ) -> Self

The configuration manager. When you clone a stack we recommend that you use the configuration manager to specify the Chef version: 12, 11.10, or 11.4 for Linux stacks, or 12.2 for Windows stacks. The default value for Linux stacks is currently 12.

pub fn get_configuration_manager(&self) -> &Option<StackConfigurationManager>

The configuration manager. When you clone a stack we recommend that you use the configuration manager to specify the Chef version: 12, 11.10, or 11.4 for Linux stacks, or 12.2 for Windows stacks. The default value for Linux stacks is currently 12.

pub fn chef_configuration(self, input: ChefConfiguration) -> Self

A ChefConfiguration object that specifies whether to enable Berkshelf and the Berkshelf version on Chef 11.10 stacks. For more information, see Create a New Stack.

pub fn set_chef_configuration(self, input: Option<ChefConfiguration>) -> Self

A ChefConfiguration object that specifies whether to enable Berkshelf and the Berkshelf version on Chef 11.10 stacks. For more information, see Create a New Stack.

pub fn get_chef_configuration(&self) -> &Option<ChefConfiguration>

A ChefConfiguration object that specifies whether to enable Berkshelf and the Berkshelf version on Chef 11.10 stacks. For more information, see Create a New Stack.

pub fn use_custom_cookbooks(self, input: bool) -> Self

Whether to use custom cookbooks.

pub fn set_use_custom_cookbooks(self, input: Option<bool>) -> Self

Whether to use custom cookbooks.

pub fn get_use_custom_cookbooks(&self) -> &Option<bool>

Whether to use custom cookbooks.

pub fn use_opsworks_security_groups(self, input: bool) -> Self

Whether to associate the OpsWorks Stacks built-in security groups with the stack's layers.

OpsWorks Stacks provides a standard set of security groups, one for each layer, which are associated with layers by default. With UseOpsworksSecurityGroups you can instead provide your own custom security groups. UseOpsworksSecurityGroups has the following settings:

• True - OpsWorks Stacks automatically associates the appropriate built-in security group with each layer (default setting). You can associate additional security groups with a layer after you create it but you cannot delete the built-in security group.

• False - OpsWorks Stacks does not associate built-in security groups with layers. You must create appropriate Amazon EC2 security groups and associate a security group with each layer that you create. However, you can still manually associate a built-in security group with a layer on creation; custom security groups are required only for those layers that need custom settings.

For more information, see Create a New Stack.

pub fn set_use_opsworks_security_groups(self, input: Option<bool>) -> Self

Whether to associate the OpsWorks Stacks built-in security groups with the stack's layers.

OpsWorks Stacks provides a standard set of security groups, one for each layer, which are associated with layers by default. With UseOpsworksSecurityGroups you can instead provide your own custom security groups. UseOpsworksSecurityGroups has the following settings:

• True - OpsWorks Stacks automatically associates the appropriate built-in security group with each layer (default setting). You can associate additional security groups with a layer after you create it but you cannot delete the built-in security group.

• False - OpsWorks Stacks does not associate built-in security groups with layers. You must create appropriate Amazon EC2 security groups and associate a security group with each layer that you create. However, you can still manually associate a built-in security group with a layer on creation; custom security groups are required only for those layers that need custom settings.

For more information, see Create a New Stack.

pub fn get_use_opsworks_security_groups(&self) -> &Option<bool>

Whether to associate the OpsWorks Stacks built-in security groups with the stack's layers.

OpsWorks Stacks provides a standard set of security groups, one for each layer, which are associated with layers by default. With UseOpsworksSecurityGroups you can instead provide your own custom security groups. UseOpsworksSecurityGroups has the following settings:

• True - OpsWorks Stacks automatically associates the appropriate built-in security group with each layer (default setting). You can associate additional security groups with a layer after you create it but you cannot delete the built-in security group.

• False - OpsWorks Stacks does not associate built-in security groups with layers. You must create appropriate Amazon EC2 security groups and associate a security group with each layer that you create. However, you can still manually associate a built-in security group with a layer on creation; custom security groups are required only for those layers that need custom settings.

For more information, see Create a New Stack.

pub fn custom_cookbooks_source(self, input: Source) -> Self

Contains the information required to retrieve an app or cookbook from a repository. For more information, see Adding Apps or Cookbooks and Recipes.

pub fn set_custom_cookbooks_source(self, input: Option<Source>) -> Self

Contains the information required to retrieve an app or cookbook from a repository. For more information, see Adding Apps or Cookbooks and Recipes.

pub fn get_custom_cookbooks_source(&self) -> &Option<Source>

Contains the information required to retrieve an app or cookbook from a repository. For more information, see Adding Apps or Cookbooks and Recipes.

pub fn default_ssh_key_name(self, input: impl Into<String>) -> Self

A default Amazon EC2 key pair name. The default value is none. If you specify a key pair name, OpsWorks installs the public key on the instance and you can use the private key with an SSH client to log in to the instance. For more information, see Using SSH to Communicate with an Instance and Managing SSH Access. You can override this setting by specifying a different key pair, or no key pair, when you create an instance.

pub fn set_default_ssh_key_name(self, input: Option<String>) -> Self

A default Amazon EC2 key pair name. The default value is none. If you specify a key pair name, OpsWorks installs the public key on the instance and you can use the private key with an SSH client to log in to the instance. For more information, see Using SSH to Communicate with an Instance and Managing SSH Access. You can override this setting by specifying a different key pair, or no key pair, when you create an instance.

pub fn get_default_ssh_key_name(&self) -> &Option<String>

A default Amazon EC2 key pair name. The default value is none. If you specify a key pair name, OpsWorks installs the public key on the instance and you can use the private key with an SSH client to log in to the instance. For more information, see Using SSH to Communicate with an Instance and Managing SSH Access. You can override this setting by specifying a different key pair, or no key pair, when you create an instance.

pub fn clone_permissions(self, input: bool) -> Self

Whether to clone the source stack's permissions.

pub fn set_clone_permissions(self, input: Option<bool>) -> Self

Whether to clone the source stack's permissions.

pub fn get_clone_permissions(&self) -> &Option<bool>

Whether to clone the source stack's permissions.

pub fn clone_app_ids(self, input: impl Into<String>) -> Self

Appends an item to clone_app_ids.

To override the contents of this collection use set_clone_app_ids.

A list of source stack app IDs to be included in the cloned stack.

pub fn set_clone_app_ids(self, input: Option<Vec<String>>) -> Self

A list of source stack app IDs to be included in the cloned stack.

pub fn get_clone_app_ids(&self) -> &Option<Vec<String>>

A list of source stack app IDs to be included in the cloned stack.

pub fn default_root_device_type(self, input: RootDeviceType) -> Self

The default root device type. This value is used by default for all instances in the cloned stack, but you can override it when you create an instance. For more information, see Storage for the Root Device.

pub fn set_default_root_device_type(self, input: Option<RootDeviceType>) -> Self

The default root device type. This value is used by default for all instances in the cloned stack, but you can override it when you create an instance. For more information, see Storage for the Root Device.

pub fn get_default_root_device_type(&self) -> &Option<RootDeviceType>

The default root device type. This value is used by default for all instances in the cloned stack, but you can override it when you create an instance. For more information, see Storage for the Root Device.

pub fn agent_version(self, input: impl Into<String>) -> Self

The default OpsWorks Stacks agent version. You have the following options:

• Auto-update - Set this parameter to LATEST. OpsWorks Stacks automatically installs new agent versions on the stack's instances as soon as they are available.

• Fixed version - Set this parameter to your preferred agent version. To update the agent version, you must edit the stack configuration and specify a new version. OpsWorks Stacks automatically installs that version on the stack's instances.

The default setting is LATEST. To specify an agent version, you must use the complete version number, not the abbreviated number shown on the console. For a list of available agent version numbers, call DescribeAgentVersions. AgentVersion cannot be set to Chef 12.2.

You can also specify an agent version when you create or update an instance, which overrides the stack's default setting.

pub fn set_agent_version(self, input: Option<String>) -> Self

The default OpsWorks Stacks agent version. You have the following options:

• Auto-update - Set this parameter to LATEST. OpsWorks Stacks automatically installs new agent versions on the stack's instances as soon as they are available.

• Fixed version - Set this parameter to your preferred agent version. To update the agent version, you must edit the stack configuration and specify a new version. OpsWorks Stacks automatically installs that version on the stack's instances.

The default setting is LATEST. To specify an agent version, you must use the complete version number, not the abbreviated number shown on the console. For a list of available agent version numbers, call DescribeAgentVersions. AgentVersion cannot be set to Chef 12.2.

You can also specify an agent version when you create or update an instance, which overrides the stack's default setting.

pub fn get_agent_version(&self) -> &Option<String>

The default OpsWorks Stacks agent version. You have the following options:

• Auto-update - Set this parameter to LATEST. OpsWorks Stacks automatically installs new agent versions on the stack's instances as soon as they are available.

• Fixed version - Set this parameter to your preferred agent version. To update the agent version, you must edit the stack configuration and specify a new version. OpsWorks Stacks automatically installs that version on the stack's instances.

The default setting is LATEST. To specify an agent version, you must use the complete version number, not the abbreviated number shown on the console. For a list of available agent version numbers, call DescribeAgentVersions. AgentVersion cannot be set to Chef 12.2.

You can also specify an agent version when you create or update an instance, which overrides the stack's default setting.

pub fn build(self) -> Result<CloneStackInput, BuildError>

Consumes the builder and constructs a CloneStackInput.

impl CloneStackInputBuilder

pub async fn send_with( self, client: &Client ) -> Result<CloneStackOutput, SdkError<CloneStackError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for CloneStackInputBuilder

fn clone(&self) -> CloneStackInputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CloneStackInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for CloneStackInputBuilder

fn default() -> CloneStackInputBuilder

Returns the “default value” for a type.

impl PartialEq for CloneStackInputBuilder

fn eq(&self, other: &CloneStackInputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for CloneStackInputBuilder