pub struct DescribeDryRunProgressFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to DescribeDryRunProgress.
Describes the progress of a pre-update dry run analysis on an Amazon OpenSearch Service domain. For more information, see Determining whether a change will cause a blue/green deployment.
Implementations§
Source§impl DescribeDryRunProgressFluentBuilder
impl DescribeDryRunProgressFluentBuilder
Sourcepub fn as_input(&self) -> &DescribeDryRunProgressInputBuilder
pub fn as_input(&self) -> &DescribeDryRunProgressInputBuilder
Access the DescribeDryRunProgress as a reference.
Sourcepub async fn send(
self,
) -> Result<DescribeDryRunProgressOutput, SdkError<DescribeDryRunProgressError, HttpResponse>>
pub async fn send( self, ) -> Result<DescribeDryRunProgressOutput, SdkError<DescribeDryRunProgressError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<DescribeDryRunProgressOutput, DescribeDryRunProgressError, Self>
pub fn customize( self, ) -> CustomizableOperation<DescribeDryRunProgressOutput, DescribeDryRunProgressError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn domain_name(self, input: impl Into<String>) -> Self
pub fn domain_name(self, input: impl Into<String>) -> Self
The name of the domain.
Sourcepub fn set_domain_name(self, input: Option<String>) -> Self
pub fn set_domain_name(self, input: Option<String>) -> Self
The name of the domain.
Sourcepub fn get_domain_name(&self) -> &Option<String>
pub fn get_domain_name(&self) -> &Option<String>
The name of the domain.
Sourcepub fn dry_run_id(self, input: impl Into<String>) -> Self
pub fn dry_run_id(self, input: impl Into<String>) -> Self
The unique identifier of the dry run.
Sourcepub fn set_dry_run_id(self, input: Option<String>) -> Self
pub fn set_dry_run_id(self, input: Option<String>) -> Self
The unique identifier of the dry run.
Sourcepub fn get_dry_run_id(&self) -> &Option<String>
pub fn get_dry_run_id(&self) -> &Option<String>
The unique identifier of the dry run.
Sourcepub fn load_dry_run_config(self, input: bool) -> Self
pub fn load_dry_run_config(self, input: bool) -> Self
Whether to include the configuration of the dry run in the response. The configuration specifies the updates that you're planning to make on the domain.
Sourcepub fn set_load_dry_run_config(self, input: Option<bool>) -> Self
pub fn set_load_dry_run_config(self, input: Option<bool>) -> Self
Whether to include the configuration of the dry run in the response. The configuration specifies the updates that you're planning to make on the domain.
Sourcepub fn get_load_dry_run_config(&self) -> &Option<bool>
pub fn get_load_dry_run_config(&self) -> &Option<bool>
Whether to include the configuration of the dry run in the response. The configuration specifies the updates that you're planning to make on the domain.
Trait Implementations§
Source§impl Clone for DescribeDryRunProgressFluentBuilder
impl Clone for DescribeDryRunProgressFluentBuilder
Source§fn clone(&self) -> DescribeDryRunProgressFluentBuilder
fn clone(&self) -> DescribeDryRunProgressFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for DescribeDryRunProgressFluentBuilder
impl !RefUnwindSafe for DescribeDryRunProgressFluentBuilder
impl Send for DescribeDryRunProgressFluentBuilder
impl Sync for DescribeDryRunProgressFluentBuilder
impl Unpin for DescribeDryRunProgressFluentBuilder
impl !UnwindSafe for DescribeDryRunProgressFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);