pub struct AssociateAvailabilityZonesFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to AssociateAvailabilityZones.
Associates the specified Availability Zones with a transit gateway-attached firewall. For each Availability Zone, Network Firewall creates a firewall endpoint to process traffic. You can specify one or more Availability Zones where you want to deploy the firewall.
After adding Availability Zones, you must update your transit gateway route tables to direct traffic through the new firewall endpoints. Use DescribeFirewall to monitor the status of the new endpoints.
Implementations§
Source§impl AssociateAvailabilityZonesFluentBuilder
impl AssociateAvailabilityZonesFluentBuilder
Sourcepub fn as_input(&self) -> &AssociateAvailabilityZonesInputBuilder
pub fn as_input(&self) -> &AssociateAvailabilityZonesInputBuilder
Access the AssociateAvailabilityZones as a reference.
Sourcepub async fn send(
self,
) -> Result<AssociateAvailabilityZonesOutput, SdkError<AssociateAvailabilityZonesError, HttpResponse>>
pub async fn send( self, ) -> Result<AssociateAvailabilityZonesOutput, SdkError<AssociateAvailabilityZonesError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<AssociateAvailabilityZonesOutput, AssociateAvailabilityZonesError, Self>
pub fn customize( self, ) -> CustomizableOperation<AssociateAvailabilityZonesOutput, AssociateAvailabilityZonesError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn update_token(self, input: impl Into<String>) -> Self
pub fn update_token(self, input: impl Into<String>) -> Self
An optional token that you can use for optimistic locking. Network Firewall returns a token to your requests that access the firewall. The token marks the state of the firewall resource at the time of the request.
To make an unconditional change to the firewall, omit the token in your update request. Without the token, Network Firewall performs your updates regardless of whether the firewall has changed since you last retrieved it.
To make a conditional change to the firewall, provide the token in your update request. Network Firewall uses the token to ensure that the firewall hasn't changed since you last retrieved it. If it has changed, the operation fails with an InvalidTokenException. If this happens, retrieve the firewall again to get a current copy of it with a new token. Reapply your changes as needed, then try the operation again using the new token.
Sourcepub fn set_update_token(self, input: Option<String>) -> Self
pub fn set_update_token(self, input: Option<String>) -> Self
An optional token that you can use for optimistic locking. Network Firewall returns a token to your requests that access the firewall. The token marks the state of the firewall resource at the time of the request.
To make an unconditional change to the firewall, omit the token in your update request. Without the token, Network Firewall performs your updates regardless of whether the firewall has changed since you last retrieved it.
To make a conditional change to the firewall, provide the token in your update request. Network Firewall uses the token to ensure that the firewall hasn't changed since you last retrieved it. If it has changed, the operation fails with an InvalidTokenException. If this happens, retrieve the firewall again to get a current copy of it with a new token. Reapply your changes as needed, then try the operation again using the new token.
Sourcepub fn get_update_token(&self) -> &Option<String>
pub fn get_update_token(&self) -> &Option<String>
An optional token that you can use for optimistic locking. Network Firewall returns a token to your requests that access the firewall. The token marks the state of the firewall resource at the time of the request.
To make an unconditional change to the firewall, omit the token in your update request. Without the token, Network Firewall performs your updates regardless of whether the firewall has changed since you last retrieved it.
To make a conditional change to the firewall, provide the token in your update request. Network Firewall uses the token to ensure that the firewall hasn't changed since you last retrieved it. If it has changed, the operation fails with an InvalidTokenException. If this happens, retrieve the firewall again to get a current copy of it with a new token. Reapply your changes as needed, then try the operation again using the new token.
Sourcepub fn firewall_arn(self, input: impl Into<String>) -> Self
pub fn firewall_arn(self, input: impl Into<String>) -> Self
The Amazon Resource Name (ARN) of the firewall.
You must specify the ARN or the name, and you can specify both.
Sourcepub fn set_firewall_arn(self, input: Option<String>) -> Self
pub fn set_firewall_arn(self, input: Option<String>) -> Self
The Amazon Resource Name (ARN) of the firewall.
You must specify the ARN or the name, and you can specify both.
Sourcepub fn get_firewall_arn(&self) -> &Option<String>
pub fn get_firewall_arn(&self) -> &Option<String>
The Amazon Resource Name (ARN) of the firewall.
You must specify the ARN or the name, and you can specify both.
Sourcepub fn firewall_name(self, input: impl Into<String>) -> Self
pub fn firewall_name(self, input: impl Into<String>) -> Self
The descriptive name of the firewall. You can't change the name of a firewall after you create it.
You must specify the ARN or the name, and you can specify both.
Sourcepub fn set_firewall_name(self, input: Option<String>) -> Self
pub fn set_firewall_name(self, input: Option<String>) -> Self
The descriptive name of the firewall. You can't change the name of a firewall after you create it.
You must specify the ARN or the name, and you can specify both.
Sourcepub fn get_firewall_name(&self) -> &Option<String>
pub fn get_firewall_name(&self) -> &Option<String>
The descriptive name of the firewall. You can't change the name of a firewall after you create it.
You must specify the ARN or the name, and you can specify both.
Sourcepub fn availability_zone_mappings(self, input: AvailabilityZoneMapping) -> Self
pub fn availability_zone_mappings(self, input: AvailabilityZoneMapping) -> Self
Appends an item to AvailabilityZoneMappings.
To override the contents of this collection use set_availability_zone_mappings.
Required. The Availability Zones where you want to create firewall endpoints. You must specify at least one Availability Zone.
Sourcepub fn set_availability_zone_mappings(
self,
input: Option<Vec<AvailabilityZoneMapping>>,
) -> Self
pub fn set_availability_zone_mappings( self, input: Option<Vec<AvailabilityZoneMapping>>, ) -> Self
Required. The Availability Zones where you want to create firewall endpoints. You must specify at least one Availability Zone.
Sourcepub fn get_availability_zone_mappings(
&self,
) -> &Option<Vec<AvailabilityZoneMapping>>
pub fn get_availability_zone_mappings( &self, ) -> &Option<Vec<AvailabilityZoneMapping>>
Required. The Availability Zones where you want to create firewall endpoints. You must specify at least one Availability Zone.
Trait Implementations§
Source§impl Clone for AssociateAvailabilityZonesFluentBuilder
impl Clone for AssociateAvailabilityZonesFluentBuilder
Source§fn clone(&self) -> AssociateAvailabilityZonesFluentBuilder
fn clone(&self) -> AssociateAvailabilityZonesFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for AssociateAvailabilityZonesFluentBuilder
impl !RefUnwindSafe for AssociateAvailabilityZonesFluentBuilder
impl Send for AssociateAvailabilityZonesFluentBuilder
impl Sync for AssociateAvailabilityZonesFluentBuilder
impl Unpin for AssociateAvailabilityZonesFluentBuilder
impl !UnwindSafe for AssociateAvailabilityZonesFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);