pub struct DeleteDBInstanceFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to DeleteDBInstance.
The DeleteDBInstance action deletes a previously provisioned DB instance. When you delete a DB instance, all automated backups for that instance are deleted and can't be recovered. Manual DB snapshots of the DB instance to be deleted by DeleteDBInstance are not deleted.
If you request a final DB snapshot the status of the Amazon Neptune DB instance is deleting until the DB snapshot is created. The API action DescribeDBInstance is used to monitor the status of this operation. The action can't be canceled or reverted once submitted.
Note that when a DB instance is in a failure state and has a status of failed, incompatible-restore, or incompatible-network, you can only delete it when the SkipFinalSnapshot parameter is set to true.
You can't delete a DB instance if it is the only instance in the DB cluster, or if it has deletion protection enabled.
Implementations§
Source§impl DeleteDBInstanceFluentBuilder
impl DeleteDBInstanceFluentBuilder
Sourcepub fn as_input(&self) -> &DeleteDbInstanceInputBuilder
pub fn as_input(&self) -> &DeleteDbInstanceInputBuilder
Access the DeleteDBInstance as a reference.
Sourcepub async fn send(
self,
) -> Result<DeleteDbInstanceOutput, SdkError<DeleteDBInstanceError, HttpResponse>>
pub async fn send( self, ) -> Result<DeleteDbInstanceOutput, SdkError<DeleteDBInstanceError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<DeleteDbInstanceOutput, DeleteDBInstanceError, Self>
pub fn customize( self, ) -> CustomizableOperation<DeleteDbInstanceOutput, DeleteDBInstanceError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn db_instance_identifier(self, input: impl Into<String>) -> Self
pub fn db_instance_identifier(self, input: impl Into<String>) -> Self
The DB instance identifier for the DB instance to be deleted. This parameter isn't case-sensitive.
Constraints:
-
Must match the name of an existing DB instance.
Sourcepub fn set_db_instance_identifier(self, input: Option<String>) -> Self
pub fn set_db_instance_identifier(self, input: Option<String>) -> Self
The DB instance identifier for the DB instance to be deleted. This parameter isn't case-sensitive.
Constraints:
-
Must match the name of an existing DB instance.
Sourcepub fn get_db_instance_identifier(&self) -> &Option<String>
pub fn get_db_instance_identifier(&self) -> &Option<String>
The DB instance identifier for the DB instance to be deleted. This parameter isn't case-sensitive.
Constraints:
-
Must match the name of an existing DB instance.
Sourcepub fn skip_final_snapshot(self, input: bool) -> Self
pub fn skip_final_snapshot(self, input: bool) -> Self
Determines whether a final DB snapshot is created before the DB instance is deleted. If true is specified, no DBSnapshot is created. If false is specified, a DB snapshot is created before the DB instance is deleted.
Note that when a DB instance is in a failure state and has a status of 'failed', 'incompatible-restore', or 'incompatible-network', it can only be deleted when the SkipFinalSnapshot parameter is set to "true".
Specify true when deleting a Read Replica.
The FinalDBSnapshotIdentifier parameter must be specified if SkipFinalSnapshot is false.
Default: false
Sourcepub fn set_skip_final_snapshot(self, input: Option<bool>) -> Self
pub fn set_skip_final_snapshot(self, input: Option<bool>) -> Self
Determines whether a final DB snapshot is created before the DB instance is deleted. If true is specified, no DBSnapshot is created. If false is specified, a DB snapshot is created before the DB instance is deleted.
Note that when a DB instance is in a failure state and has a status of 'failed', 'incompatible-restore', or 'incompatible-network', it can only be deleted when the SkipFinalSnapshot parameter is set to "true".
Specify true when deleting a Read Replica.
The FinalDBSnapshotIdentifier parameter must be specified if SkipFinalSnapshot is false.
Default: false
Sourcepub fn get_skip_final_snapshot(&self) -> &Option<bool>
pub fn get_skip_final_snapshot(&self) -> &Option<bool>
Determines whether a final DB snapshot is created before the DB instance is deleted. If true is specified, no DBSnapshot is created. If false is specified, a DB snapshot is created before the DB instance is deleted.
Note that when a DB instance is in a failure state and has a status of 'failed', 'incompatible-restore', or 'incompatible-network', it can only be deleted when the SkipFinalSnapshot parameter is set to "true".
Specify true when deleting a Read Replica.
The FinalDBSnapshotIdentifier parameter must be specified if SkipFinalSnapshot is false.
Default: false
Sourcepub fn final_db_snapshot_identifier(self, input: impl Into<String>) -> Self
pub fn final_db_snapshot_identifier(self, input: impl Into<String>) -> Self
The DBSnapshotIdentifier of the new DBSnapshot created when SkipFinalSnapshot is set to false.
Specifying this parameter and also setting the SkipFinalShapshot parameter to true results in an error.
Constraints:
-
Must be 1 to 255 letters or numbers.
-
First character must be a letter
-
Cannot end with a hyphen or contain two consecutive hyphens
-
Cannot be specified when deleting a Read Replica.
Sourcepub fn set_final_db_snapshot_identifier(self, input: Option<String>) -> Self
pub fn set_final_db_snapshot_identifier(self, input: Option<String>) -> Self
The DBSnapshotIdentifier of the new DBSnapshot created when SkipFinalSnapshot is set to false.
Specifying this parameter and also setting the SkipFinalShapshot parameter to true results in an error.
Constraints:
-
Must be 1 to 255 letters or numbers.
-
First character must be a letter
-
Cannot end with a hyphen or contain two consecutive hyphens
-
Cannot be specified when deleting a Read Replica.
Sourcepub fn get_final_db_snapshot_identifier(&self) -> &Option<String>
pub fn get_final_db_snapshot_identifier(&self) -> &Option<String>
The DBSnapshotIdentifier of the new DBSnapshot created when SkipFinalSnapshot is set to false.
Specifying this parameter and also setting the SkipFinalShapshot parameter to true results in an error.
Constraints:
-
Must be 1 to 255 letters or numbers.
-
First character must be a letter
-
Cannot end with a hyphen or contain two consecutive hyphens
-
Cannot be specified when deleting a Read Replica.
Trait Implementations§
Source§impl Clone for DeleteDBInstanceFluentBuilder
impl Clone for DeleteDBInstanceFluentBuilder
Source§fn clone(&self) -> DeleteDBInstanceFluentBuilder
fn clone(&self) -> DeleteDBInstanceFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for DeleteDBInstanceFluentBuilder
impl !RefUnwindSafe for DeleteDBInstanceFluentBuilder
impl Send for DeleteDBInstanceFluentBuilder
impl Sync for DeleteDBInstanceFluentBuilder
impl Unpin for DeleteDBInstanceFluentBuilder
impl !UnwindSafe for DeleteDBInstanceFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);