pub struct PutResourceAttributesFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to PutResourceAttributes.
Provides identifying details of the resource being migrated so that it can be associated in the Application Discovery Service repository. This association occurs asynchronously after PutResourceAttributes returns.
-
Keep in mind that subsequent calls to PutResourceAttributes will override previously stored attributes. For example, if it is first called with a MAC address, but later, it is desired to add an IP address, it will then be required to call it with both the IP and MAC addresses to prevent overriding the MAC address.
-
Note the instructions regarding the special use case of the
ResourceAttributeListparameter when specifying any "VM" related value.
Because this is an asynchronous call, it will always return 200, whether an association occurs or not. To confirm if an association was found based on the provided details, call ListDiscoveredResources.
Implementations§
Source§impl PutResourceAttributesFluentBuilder
impl PutResourceAttributesFluentBuilder
Sourcepub fn as_input(&self) -> &PutResourceAttributesInputBuilder
pub fn as_input(&self) -> &PutResourceAttributesInputBuilder
Access the PutResourceAttributes as a reference.
Sourcepub async fn send(
self,
) -> Result<PutResourceAttributesOutput, SdkError<PutResourceAttributesError, HttpResponse>>
pub async fn send( self, ) -> Result<PutResourceAttributesOutput, SdkError<PutResourceAttributesError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<PutResourceAttributesOutput, PutResourceAttributesError, Self>
pub fn customize( self, ) -> CustomizableOperation<PutResourceAttributesOutput, PutResourceAttributesError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn progress_update_stream(self, input: impl Into<String>) -> Self
pub fn progress_update_stream(self, input: impl Into<String>) -> Self
The name of the ProgressUpdateStream.
Sourcepub fn set_progress_update_stream(self, input: Option<String>) -> Self
pub fn set_progress_update_stream(self, input: Option<String>) -> Self
The name of the ProgressUpdateStream.
Sourcepub fn get_progress_update_stream(&self) -> &Option<String>
pub fn get_progress_update_stream(&self) -> &Option<String>
The name of the ProgressUpdateStream.
Sourcepub fn migration_task_name(self, input: impl Into<String>) -> Self
pub fn migration_task_name(self, input: impl Into<String>) -> Self
Unique identifier that references the migration task. Do not store personal data in this field.
Sourcepub fn set_migration_task_name(self, input: Option<String>) -> Self
pub fn set_migration_task_name(self, input: Option<String>) -> Self
Unique identifier that references the migration task. Do not store personal data in this field.
Sourcepub fn get_migration_task_name(&self) -> &Option<String>
pub fn get_migration_task_name(&self) -> &Option<String>
Unique identifier that references the migration task. Do not store personal data in this field.
Sourcepub fn resource_attribute_list(self, input: ResourceAttribute) -> Self
pub fn resource_attribute_list(self, input: ResourceAttribute) -> Self
Appends an item to ResourceAttributeList.
To override the contents of this collection use set_resource_attribute_list.
Information about the resource that is being migrated. This data will be used to map the task to a resource in the Application Discovery Service repository.
Takes the object array of ResourceAttribute where the Type field is reserved for the following values: IPV4_ADDRESS | IPV6_ADDRESS | MAC_ADDRESS | FQDN | VM_MANAGER_ID | VM_MANAGED_OBJECT_REFERENCE | VM_NAME | VM_PATH | BIOS_ID | MOTHERBOARD_SERIAL_NUMBER where the identifying value can be a string up to 256 characters.
-
If any "VM" related value is set for a
ResourceAttributeobject, it is required thatVM_MANAGER_ID, as a minimum, is always set. IfVM_MANAGER_IDis not set, then all "VM" fields will be discarded and "VM" fields will not be used for matching the migration task to a server in Application Discovery Service repository. See the Example section below for a use case of specifying "VM" related values. -
If a server you are trying to match has multiple IP or MAC addresses, you should provide as many as you know in separate type/value pairs passed to the
ResourceAttributeListparameter to maximize the chances of matching.
Sourcepub fn set_resource_attribute_list(
self,
input: Option<Vec<ResourceAttribute>>,
) -> Self
pub fn set_resource_attribute_list( self, input: Option<Vec<ResourceAttribute>>, ) -> Self
Information about the resource that is being migrated. This data will be used to map the task to a resource in the Application Discovery Service repository.
Takes the object array of ResourceAttribute where the Type field is reserved for the following values: IPV4_ADDRESS | IPV6_ADDRESS | MAC_ADDRESS | FQDN | VM_MANAGER_ID | VM_MANAGED_OBJECT_REFERENCE | VM_NAME | VM_PATH | BIOS_ID | MOTHERBOARD_SERIAL_NUMBER where the identifying value can be a string up to 256 characters.
-
If any "VM" related value is set for a
ResourceAttributeobject, it is required thatVM_MANAGER_ID, as a minimum, is always set. IfVM_MANAGER_IDis not set, then all "VM" fields will be discarded and "VM" fields will not be used for matching the migration task to a server in Application Discovery Service repository. See the Example section below for a use case of specifying "VM" related values. -
If a server you are trying to match has multiple IP or MAC addresses, you should provide as many as you know in separate type/value pairs passed to the
ResourceAttributeListparameter to maximize the chances of matching.
Sourcepub fn get_resource_attribute_list(&self) -> &Option<Vec<ResourceAttribute>>
pub fn get_resource_attribute_list(&self) -> &Option<Vec<ResourceAttribute>>
Information about the resource that is being migrated. This data will be used to map the task to a resource in the Application Discovery Service repository.
Takes the object array of ResourceAttribute where the Type field is reserved for the following values: IPV4_ADDRESS | IPV6_ADDRESS | MAC_ADDRESS | FQDN | VM_MANAGER_ID | VM_MANAGED_OBJECT_REFERENCE | VM_NAME | VM_PATH | BIOS_ID | MOTHERBOARD_SERIAL_NUMBER where the identifying value can be a string up to 256 characters.
-
If any "VM" related value is set for a
ResourceAttributeobject, it is required thatVM_MANAGER_ID, as a minimum, is always set. IfVM_MANAGER_IDis not set, then all "VM" fields will be discarded and "VM" fields will not be used for matching the migration task to a server in Application Discovery Service repository. See the Example section below for a use case of specifying "VM" related values. -
If a server you are trying to match has multiple IP or MAC addresses, you should provide as many as you know in separate type/value pairs passed to the
ResourceAttributeListparameter to maximize the chances of matching.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
Optional boolean flag to indicate whether any effect should take place. Used to test if the caller has permission to make the call.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
Optional boolean flag to indicate whether any effect should take place. Used to test if the caller has permission to make the call.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
Optional boolean flag to indicate whether any effect should take place. Used to test if the caller has permission to make the call.
Trait Implementations§
Source§impl Clone for PutResourceAttributesFluentBuilder
impl Clone for PutResourceAttributesFluentBuilder
Source§fn clone(&self) -> PutResourceAttributesFluentBuilder
fn clone(&self) -> PutResourceAttributesFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for PutResourceAttributesFluentBuilder
impl !RefUnwindSafe for PutResourceAttributesFluentBuilder
impl Send for PutResourceAttributesFluentBuilder
impl Sync for PutResourceAttributesFluentBuilder
impl Unpin for PutResourceAttributesFluentBuilder
impl !UnwindSafe for PutResourceAttributesFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);