Struct aws_sdk_memorydb::client::Client

pub struct Client<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

An ergonomic service client for AmazonMemoryDB.

This client allows ergonomic access to a AmazonMemoryDB-shaped service. Each method corresponds to an endpoint defined in the service’s Smithy model, and the request and response shapes are auto-generated from that same model.

Using a Client

Once you have a client set up, you can access the service’s endpoints by calling the appropriate method on Client. Each such method returns a request builder for that endpoint, with methods for setting the various fields of the request. Once your request is complete, use the send method to send the request. send returns a future, which you then have to .await to get the service’s response.

Implementations

impl<C, M, R> Client<C, M, R>

pub fn with_config(client: Client<C, M, R>, conf: Config) -> Self

Creates a client with the given service configuration.

pub fn conf(&self) -> &Config

Returns the client’s configuration.

impl<C, M, R> Client<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub fn batch_update_cluster(&self) -> BatchUpdateCluster<C, M, R>

Constructs a fluent builder for the BatchUpdateCluster operation.

See BatchUpdateCluster for more information about the operation and its arguments.

pub fn copy_snapshot(&self) -> CopySnapshot<C, M, R>

Constructs a fluent builder for the CopySnapshot operation.

See CopySnapshot for more information about the operation and its arguments.

pub fn create_acl(&self) -> CreateACL<C, M, R>

Constructs a fluent builder for the CreateACL operation.

See CreateACL for more information about the operation and its arguments.

pub fn create_cluster(&self) -> CreateCluster<C, M, R>

Constructs a fluent builder for the CreateCluster operation.

See CreateCluster for more information about the operation and its arguments.

pub fn create_parameter_group(&self) -> CreateParameterGroup<C, M, R>

Constructs a fluent builder for the CreateParameterGroup operation.

See CreateParameterGroup for more information about the operation and its arguments.

pub fn create_snapshot(&self) -> CreateSnapshot<C, M, R>

Constructs a fluent builder for the CreateSnapshot operation.

See CreateSnapshot for more information about the operation and its arguments.

pub fn create_subnet_group(&self) -> CreateSubnetGroup<C, M, R>

Constructs a fluent builder for the CreateSubnetGroup operation.

See CreateSubnetGroup for more information about the operation and its arguments.

pub fn create_user(&self) -> CreateUser<C, M, R>

Constructs a fluent builder for the CreateUser operation.

See CreateUser for more information about the operation and its arguments.

pub fn delete_acl(&self) -> DeleteACL<C, M, R>

Constructs a fluent builder for the DeleteACL operation.

See DeleteACL for more information about the operation and its arguments.

pub fn delete_cluster(&self) -> DeleteCluster<C, M, R>

Constructs a fluent builder for the DeleteCluster operation.

See DeleteCluster for more information about the operation and its arguments.

pub fn delete_parameter_group(&self) -> DeleteParameterGroup<C, M, R>

Constructs a fluent builder for the DeleteParameterGroup operation.

See DeleteParameterGroup for more information about the operation and its arguments.

pub fn delete_snapshot(&self) -> DeleteSnapshot<C, M, R>

Constructs a fluent builder for the DeleteSnapshot operation.

See DeleteSnapshot for more information about the operation and its arguments.

pub fn delete_subnet_group(&self) -> DeleteSubnetGroup<C, M, R>

Constructs a fluent builder for the DeleteSubnetGroup operation.

See DeleteSubnetGroup for more information about the operation and its arguments.

pub fn delete_user(&self) -> DeleteUser<C, M, R>

Constructs a fluent builder for the DeleteUser operation.

See DeleteUser for more information about the operation and its arguments.

pub fn describe_ac_ls(&self) -> DescribeACLs<C, M, R>

Constructs a fluent builder for the DescribeACLs operation.

See DescribeACLs for more information about the operation and its arguments.

pub fn describe_clusters(&self) -> DescribeClusters<C, M, R>

Constructs a fluent builder for the DescribeClusters operation.

See DescribeClusters for more information about the operation and its arguments.

pub fn describe_engine_versions(&self) -> DescribeEngineVersions<C, M, R>

Constructs a fluent builder for the DescribeEngineVersions operation.

See DescribeEngineVersions for more information about the operation and its arguments.

pub fn describe_events(&self) -> DescribeEvents<C, M, R>

Constructs a fluent builder for the DescribeEvents operation.

See DescribeEvents for more information about the operation and its arguments.

pub fn describe_parameter_groups(&self) -> DescribeParameterGroups<C, M, R>

Constructs a fluent builder for the DescribeParameterGroups operation.

See DescribeParameterGroups for more information about the operation and its arguments.

pub fn describe_parameters(&self) -> DescribeParameters<C, M, R>

Constructs a fluent builder for the DescribeParameters operation.

See DescribeParameters for more information about the operation and its arguments.

pub fn describe_service_updates(&self) -> DescribeServiceUpdates<C, M, R>

Constructs a fluent builder for the DescribeServiceUpdates operation.

See DescribeServiceUpdates for more information about the operation and its arguments.

pub fn describe_snapshots(&self) -> DescribeSnapshots<C, M, R>

Constructs a fluent builder for the DescribeSnapshots operation.

See DescribeSnapshots for more information about the operation and its arguments.

pub fn describe_subnet_groups(&self) -> DescribeSubnetGroups<C, M, R>

Constructs a fluent builder for the DescribeSubnetGroups operation.

See DescribeSubnetGroups for more information about the operation and its arguments.

pub fn describe_users(&self) -> DescribeUsers<C, M, R>

Constructs a fluent builder for the DescribeUsers operation.

See DescribeUsers for more information about the operation and its arguments.

pub fn failover_shard(&self) -> FailoverShard<C, M, R>

Constructs a fluent builder for the FailoverShard operation.

See FailoverShard for more information about the operation and its arguments.

pub fn list_allowed_node_type_updates(
    &self
) -> ListAllowedNodeTypeUpdates<C, M, R>

Constructs a fluent builder for the ListAllowedNodeTypeUpdates operation.

See ListAllowedNodeTypeUpdates for more information about the operation and its arguments.

pub fn list_tags(&self) -> ListTags<C, M, R>

Constructs a fluent builder for the ListTags operation.

See ListTags for more information about the operation and its arguments.

pub fn reset_parameter_group(&self) -> ResetParameterGroup<C, M, R>

Constructs a fluent builder for the ResetParameterGroup operation.

See ResetParameterGroup for more information about the operation and its arguments.

pub fn tag_resource(&self) -> TagResource<C, M, R>

Constructs a fluent builder for the TagResource operation.

See TagResource for more information about the operation and its arguments.

pub fn untag_resource(&self) -> UntagResource<C, M, R>

Constructs a fluent builder for the UntagResource operation.

See UntagResource for more information about the operation and its arguments.

pub fn update_acl(&self) -> UpdateACL<C, M, R>

Constructs a fluent builder for the UpdateACL operation.

See UpdateACL for more information about the operation and its arguments.

pub fn update_cluster(&self) -> UpdateCluster<C, M, R>

Constructs a fluent builder for the UpdateCluster operation.

See UpdateCluster for more information about the operation and its arguments.

pub fn update_parameter_group(&self) -> UpdateParameterGroup<C, M, R>

Constructs a fluent builder for the UpdateParameterGroup operation.

See UpdateParameterGroup for more information about the operation and its arguments.

pub fn update_subnet_group(&self) -> UpdateSubnetGroup<C, M, R>

Constructs a fluent builder for the UpdateSubnetGroup operation.

See UpdateSubnetGroup for more information about the operation and its arguments.

pub fn update_user(&self) -> UpdateUser<C, M, R>

Constructs a fluent builder for the UpdateUser operation.

See UpdateUser for more information about the operation and its arguments.

impl<C> Client<C, AwsMiddleware, Standard>

pub fn from_conf_conn(conf: Config, conn: C) -> Self

Creates a client with the given service config and connector override.

impl Client<DynConnector, AwsMiddleware, Standard>

pub fn new(config: &Config) -> Self

Creates a new client from a shared config.

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Trait Implementations

impl<C, M, R> Clone for Client<C, M, R>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for Client<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<C, M, R> From<Client<C, M, R>> for Client<C, M, R>

fn from(client: Client<C, M, R>) -> Self

Performs the conversion.