#[non_exhaustive]pub struct UpdateFlowSourceInput {Show 20 fields
pub decryption: Option<UpdateEncryption>,
pub description: Option<String>,
pub entitlement_arn: Option<String>,
pub flow_arn: Option<String>,
pub ingest_port: Option<i32>,
pub max_bitrate: Option<i32>,
pub max_latency: Option<i32>,
pub max_sync_buffer: Option<i32>,
pub media_stream_source_configurations: Option<Vec<MediaStreamSourceConfigurationRequest>>,
pub min_latency: Option<i32>,
pub protocol: Option<Protocol>,
pub sender_control_port: Option<i32>,
pub sender_ip_address: Option<String>,
pub source_arn: Option<String>,
pub source_listener_address: Option<String>,
pub source_listener_port: Option<i32>,
pub stream_id: Option<String>,
pub vpc_interface_name: Option<String>,
pub whitelist_cidr: Option<String>,
pub gateway_bridge_source: Option<UpdateGatewayBridgeSourceRequest>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.decryption: Option<UpdateEncryption>The type of encryption that is used on the content ingested from the source.
description: Option<String>A description of the source. This description is not visible outside of the current Amazon Web Services account.
entitlement_arn: Option<String>The Amazon Resource Name (ARN) of the entitlement that allows you to subscribe to the flow. The entitlement is set by the content originator, and the ARN is generated as part of the originator's flow.
flow_arn: Option<String>The ARN of the flow that you want to update.
ingest_port: Option<i32>The port that the flow listens on for incoming content. If the protocol of the source is Zixi, the port must be set to 2088.
max_bitrate: Option<i32>The maximum bitrate for RIST, RTP, and RTP-FEC streams.
max_latency: Option<i32>The maximum latency in milliseconds. This parameter applies only to RIST-based and Zixi-based streams.
max_sync_buffer: Option<i32>The size of the buffer (in milliseconds) to use to sync incoming source data.
media_stream_source_configurations: Option<Vec<MediaStreamSourceConfigurationRequest>>The media stream that is associated with the source, and the parameters for that association.
min_latency: Option<i32>The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.
protocol: Option<Protocol>The protocol that the source uses to deliver the content to MediaConnect.
Elemental MediaConnect no longer supports the Fujitsu QoS protocol. This reference is maintained for legacy purposes only.
sender_control_port: Option<i32>The port that the flow uses to send outbound requests to initiate connection with the sender.
sender_ip_address: Option<String>The IP address that the flow communicates with to initiate connection with the sender.
source_arn: Option<String>The ARN of the source that you want to update.
source_listener_address: Option<String>The source IP or domain name for SRT-caller protocol.
source_listener_port: Option<i32>Source port for SRT-caller protocol.
stream_id: Option<String>The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.
vpc_interface_name: Option<String>The name of the VPC interface that you want to send your output to.
whitelist_cidr: Option<String>The range of IP addresses that are allowed to contribute content to your source. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.
gateway_bridge_source: Option<UpdateGatewayBridgeSourceRequest>The source configuration for cloud flows receiving a stream from a bridge.
Implementations§
Source§impl UpdateFlowSourceInput
impl UpdateFlowSourceInput
Sourcepub fn decryption(&self) -> Option<&UpdateEncryption>
pub fn decryption(&self) -> Option<&UpdateEncryption>
The type of encryption that is used on the content ingested from the source.
Sourcepub fn description(&self) -> Option<&str>
pub fn description(&self) -> Option<&str>
A description of the source. This description is not visible outside of the current Amazon Web Services account.
Sourcepub fn entitlement_arn(&self) -> Option<&str>
pub fn entitlement_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the entitlement that allows you to subscribe to the flow. The entitlement is set by the content originator, and the ARN is generated as part of the originator's flow.
Sourcepub fn ingest_port(&self) -> Option<i32>
pub fn ingest_port(&self) -> Option<i32>
The port that the flow listens on for incoming content. If the protocol of the source is Zixi, the port must be set to 2088.
Sourcepub fn max_bitrate(&self) -> Option<i32>
pub fn max_bitrate(&self) -> Option<i32>
The maximum bitrate for RIST, RTP, and RTP-FEC streams.
Sourcepub fn max_latency(&self) -> Option<i32>
pub fn max_latency(&self) -> Option<i32>
The maximum latency in milliseconds. This parameter applies only to RIST-based and Zixi-based streams.
Sourcepub fn max_sync_buffer(&self) -> Option<i32>
pub fn max_sync_buffer(&self) -> Option<i32>
The size of the buffer (in milliseconds) to use to sync incoming source data.
Sourcepub fn media_stream_source_configurations(
&self,
) -> &[MediaStreamSourceConfigurationRequest]
pub fn media_stream_source_configurations( &self, ) -> &[MediaStreamSourceConfigurationRequest]
The media stream that is associated with the source, and the parameters for that association.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .media_stream_source_configurations.is_none().
Sourcepub fn min_latency(&self) -> Option<i32>
pub fn min_latency(&self) -> Option<i32>
The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.
Sourcepub fn protocol(&self) -> Option<&Protocol>
pub fn protocol(&self) -> Option<&Protocol>
The protocol that the source uses to deliver the content to MediaConnect.
Elemental MediaConnect no longer supports the Fujitsu QoS protocol. This reference is maintained for legacy purposes only.
Sourcepub fn sender_control_port(&self) -> Option<i32>
pub fn sender_control_port(&self) -> Option<i32>
The port that the flow uses to send outbound requests to initiate connection with the sender.
Sourcepub fn sender_ip_address(&self) -> Option<&str>
pub fn sender_ip_address(&self) -> Option<&str>
The IP address that the flow communicates with to initiate connection with the sender.
Sourcepub fn source_arn(&self) -> Option<&str>
pub fn source_arn(&self) -> Option<&str>
The ARN of the source that you want to update.
Sourcepub fn source_listener_address(&self) -> Option<&str>
pub fn source_listener_address(&self) -> Option<&str>
The source IP or domain name for SRT-caller protocol.
Sourcepub fn source_listener_port(&self) -> Option<i32>
pub fn source_listener_port(&self) -> Option<i32>
Source port for SRT-caller protocol.
Sourcepub fn stream_id(&self) -> Option<&str>
pub fn stream_id(&self) -> Option<&str>
The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.
Sourcepub fn vpc_interface_name(&self) -> Option<&str>
pub fn vpc_interface_name(&self) -> Option<&str>
The name of the VPC interface that you want to send your output to.
Sourcepub fn whitelist_cidr(&self) -> Option<&str>
pub fn whitelist_cidr(&self) -> Option<&str>
The range of IP addresses that are allowed to contribute content to your source. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.
Sourcepub fn gateway_bridge_source(&self) -> Option<&UpdateGatewayBridgeSourceRequest>
pub fn gateway_bridge_source(&self) -> Option<&UpdateGatewayBridgeSourceRequest>
The source configuration for cloud flows receiving a stream from a bridge.
Source§impl UpdateFlowSourceInput
impl UpdateFlowSourceInput
Sourcepub fn builder() -> UpdateFlowSourceInputBuilder
pub fn builder() -> UpdateFlowSourceInputBuilder
Creates a new builder-style object to manufacture UpdateFlowSourceInput.
Trait Implementations§
Source§impl Clone for UpdateFlowSourceInput
impl Clone for UpdateFlowSourceInput
Source§fn clone(&self) -> UpdateFlowSourceInput
fn clone(&self) -> UpdateFlowSourceInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for UpdateFlowSourceInput
impl Debug for UpdateFlowSourceInput
Source§impl PartialEq for UpdateFlowSourceInput
impl PartialEq for UpdateFlowSourceInput
impl StructuralPartialEq for UpdateFlowSourceInput
Auto Trait Implementations§
impl Freeze for UpdateFlowSourceInput
impl RefUnwindSafe for UpdateFlowSourceInput
impl Send for UpdateFlowSourceInput
impl Sync for UpdateFlowSourceInput
impl Unpin for UpdateFlowSourceInput
impl UnwindSafe for UpdateFlowSourceInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);