Struct aws_sdk_managedblockchain::Client

pub struct Client { /* private fields */ }

Client for Amazon Managed Blockchain

Client for invoking operations on Amazon Managed Blockchain. Each operation on Amazon Managed Blockchain is a method on this this struct. .send() MUST be invoked on the generated operations to dispatch the request to the service.

Constructing a Client

A Config is required to construct a client. For most use cases, the aws-config crate should be used to automatically resolve this config using aws_config::load_from_env(), since this will resolve an SdkConfig which can be shared across multiple different AWS SDK clients. This config resolution process can be customized by calling aws_config::from_env() instead, which returns a ConfigLoader that uses the builder pattern to customize the default config.

In the simplest case, creating a client looks as follows:

let config = ::aws_config::load_from_env().await;
let client = aws_sdk_managedblockchain::Client::new(&config);

Occasionally, SDKs may have additional service-specific that can be set on the Config that is absent from SdkConfig, or slightly different settings for a specific client may be desired. The Config struct implements From<&SdkConfig>, so setting these specific settings can be done as follows:

let sdk_config = ::aws_config::load_from_env().await;
let config = aws_sdk_managedblockchain::config::Builder::from(&sdk_config)
    .some_service_specific_setting("value")
    .build();

See the aws-config docs and Config for more information on customizing configuration.

Note: Client construction is expensive due to connection thread pool initialization, and should be done once at application start-up.

Using the Client

A client has a function for every operation that can be performed by the service. For example, the CreateAccessor operation has a Client::create_accessor, function which returns a builder for that operation. The fluent builder ultimately has a send() function that returns an async future that returns a result, as illustrated below:

let result = client.create_accessor()
    .client_request_token("example")
    .send()
    .await;

The underlying HTTP requests that get made by this can be modified with the customize_operation function on the fluent builder. See the customize module for more information.

Implementations

impl Client

pub fn create_accessor(&self) -> CreateAccessorFluentBuilder

Constructs a fluent builder for the CreateAccessor operation.

• The fluent builder is configurable:
  • client_request_token(impl ::std::convert::Into<String>) / set_client_request_token(Option<String>):

    This is a unique, case-sensitive identifier that you provide to ensure the idempotency of the operation. An idempotent operation completes no more than once. This identifier is required only if you make a service request directly using an HTTP client. It is generated automatically if you use an Amazon Web Services SDK or the Amazon Web Services CLI.

  • accessor_type(AccessorType) / set_accessor_type(Option<AccessorType>):

    The type of accessor.

    Currently, accessor type is restricted to BILLING_TOKEN.

  • tags(HashMap<String, String>) / set_tags(Option<HashMap<String, String>>):

    Tags to assign to the Accessor.

    Each tag consists of a key and an optional value. You can specify multiple key-value pairs in a single request with an overall maximum of 50 tags allowed per resource.

    For more information about tags, see Tagging Resources in the Amazon Managed Blockchain Ethereum Developer Guide, or Tagging Resources in the Amazon Managed Blockchain Hyperledger Fabric Developer Guide.

• On success, responds with CreateAccessorOutput with field(s):
  • accessor_id(Option<String>):

    The unique identifier of the accessor.

  • billing_token(Option<String>):

    The billing token is a property of the Accessor. Use this token to make Ethereum API calls to your Ethereum node. The billing token is used to track your accessor object for billing Ethereum API requests made to your Ethereum nodes.

• On failure, responds with SdkError<CreateAccessorError>

impl Client

pub fn create_member(&self) -> CreateMemberFluentBuilder

Constructs a fluent builder for the CreateMember operation.

• The fluent builder is configurable:
  • client_request_token(impl ::std::convert::Into<String>) / set_client_request_token(Option<String>):

    A unique, case-sensitive identifier that you provide to ensure the idempotency of the operation. An idempotent operation completes no more than one time. This identifier is required only if you make a service request directly using an HTTP client. It is generated automatically if you use an Amazon Web Services SDK or the CLI.

  • invitation_id(impl ::std::convert::Into<String>) / set_invitation_id(Option<String>):

    The unique identifier of the invitation that is sent to the member to join the network.

  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network in which the member is created.

  • member_configuration(MemberConfiguration) / set_member_configuration(Option<MemberConfiguration>):

    Member configuration parameters.

• On success, responds with CreateMemberOutput with field(s):
  • member_id(Option<String>):

    The unique identifier of the member.

• On failure, responds with SdkError<CreateMemberError>

impl Client

pub fn create_network(&self) -> CreateNetworkFluentBuilder

Constructs a fluent builder for the CreateNetwork operation.

• The fluent builder is configurable:
  • client_request_token(impl ::std::convert::Into<String>) / set_client_request_token(Option<String>):

    This is a unique, case-sensitive identifier that you provide to ensure the idempotency of the operation. An idempotent operation completes no more than once. This identifier is required only if you make a service request directly using an HTTP client. It is generated automatically if you use an Amazon Web Services SDK or the Amazon Web Services CLI.

  • name(impl ::std::convert::Into<String>) / set_name(Option<String>):

    The name of the network.

  • description(impl ::std::convert::Into<String>) / set_description(Option<String>):

    An optional description for the network.

  • framework(Framework) / set_framework(Option<Framework>):

    The blockchain framework that the network uses.

  • framework_version(impl ::std::convert::Into<String>) / set_framework_version(Option<String>):

    The version of the blockchain framework that the network uses.

  • framework_configuration(NetworkFrameworkConfiguration) / set_framework_configuration(Option<NetworkFrameworkConfiguration>):

    Configuration properties of the blockchain framework relevant to the network configuration.

  • voting_policy(VotingPolicy) / set_voting_policy(Option<VotingPolicy>):

    The voting rules used by the network to determine if a proposal is approved.

  • member_configuration(MemberConfiguration) / set_member_configuration(Option<MemberConfiguration>):

    Configuration properties for the first member within the network.

  • tags(HashMap<String, String>) / set_tags(Option<HashMap<String, String>>):

    Tags to assign to the network.

    Each tag consists of a key and an optional value. You can specify multiple key-value pairs in a single request with an overall maximum of 50 tags allowed per resource.

    For more information about tags, see Tagging Resources in the Amazon Managed Blockchain Ethereum Developer Guide, or Tagging Resources in the Amazon Managed Blockchain Hyperledger Fabric Developer Guide.

• On success, responds with CreateNetworkOutput with field(s):
  • network_id(Option<String>):

    The unique identifier for the network.

  • member_id(Option<String>):

    The unique identifier for the first member within the network.

• On failure, responds with SdkError<CreateNetworkError>

impl Client

pub fn create_node(&self) -> CreateNodeFluentBuilder

Constructs a fluent builder for the CreateNode operation.

• The fluent builder is configurable:
  • client_request_token(impl ::std::convert::Into<String>) / set_client_request_token(Option<String>):

    A unique, case-sensitive identifier that you provide to ensure the idempotency of the operation. An idempotent operation completes no more than one time. This identifier is required only if you make a service request directly using an HTTP client. It is generated automatically if you use an Amazon Web Services SDK or the CLI.

  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network for the node.

    Ethereum public networks have the following NetworkIds:

    • n-ethereum-mainnet

    • n-ethereum-goerli

    • n-ethereum-rinkeby

  • member_id(impl ::std::convert::Into<String>) / set_member_id(Option<String>):

    The unique identifier of the member that owns this node.

    Applies only to Hyperledger Fabric.

  • node_configuration(NodeConfiguration) / set_node_configuration(Option<NodeConfiguration>):

    The properties of a node configuration.

  • tags(HashMap<String, String>) / set_tags(Option<HashMap<String, String>>):

    Tags to assign to the node.

    Each tag consists of a key and an optional value. You can specify multiple key-value pairs in a single request with an overall maximum of 50 tags allowed per resource.

    For more information about tags, see Tagging Resources in the Amazon Managed Blockchain Ethereum Developer Guide, or Tagging Resources in the Amazon Managed Blockchain Hyperledger Fabric Developer Guide.

• On success, responds with CreateNodeOutput with field(s):
  • node_id(Option<String>):

    The unique identifier of the node.

• On failure, responds with SdkError<CreateNodeError>

impl Client

pub fn create_proposal(&self) -> CreateProposalFluentBuilder

Constructs a fluent builder for the CreateProposal operation.

• The fluent builder is configurable:
  • client_request_token(impl ::std::convert::Into<String>) / set_client_request_token(Option<String>):

    A unique, case-sensitive identifier that you provide to ensure the idempotency of the operation. An idempotent operation completes no more than one time. This identifier is required only if you make a service request directly using an HTTP client. It is generated automatically if you use an Amazon Web Services SDK or the CLI.

  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network for which the proposal is made.

  • member_id(impl ::std::convert::Into<String>) / set_member_id(Option<String>):

    The unique identifier of the member that is creating the proposal. This identifier is especially useful for identifying the member making the proposal when multiple members exist in a single Amazon Web Services account.

  • actions(ProposalActions) / set_actions(Option<ProposalActions>):

    The type of actions proposed, such as inviting a member or removing a member. The types of Actions in a proposal are mutually exclusive. For example, a proposal with Invitations actions cannot also contain Removals actions.

  • description(impl ::std::convert::Into<String>) / set_description(Option<String>):

    A description for the proposal that is visible to voting members, for example, “Proposal to add Example Corp. as member.”

  • tags(HashMap<String, String>) / set_tags(Option<HashMap<String, String>>):

    Tags to assign to the proposal.

    Each tag consists of a key and an optional value. You can specify multiple key-value pairs in a single request with an overall maximum of 50 tags allowed per resource.

    For more information about tags, see Tagging Resources in the Amazon Managed Blockchain Ethereum Developer Guide, or Tagging Resources in the Amazon Managed Blockchain Hyperledger Fabric Developer Guide.

• On success, responds with CreateProposalOutput with field(s):
  • proposal_id(Option<String>):

    The unique identifier of the proposal.

• On failure, responds with SdkError<CreateProposalError>

impl Client

pub fn delete_accessor(&self) -> DeleteAccessorFluentBuilder

Constructs a fluent builder for the DeleteAccessor operation.

• The fluent builder is configurable:
  • accessor_id(impl ::std::convert::Into<String>) / set_accessor_id(Option<String>):

    The unique identifier of the accessor.

• On success, responds with DeleteAccessorOutput
• On failure, responds with SdkError<DeleteAccessorError>

impl Client

pub fn delete_member(&self) -> DeleteMemberFluentBuilder

Constructs a fluent builder for the DeleteMember operation.

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network from which the member is removed.

  • member_id(impl ::std::convert::Into<String>) / set_member_id(Option<String>):

    The unique identifier of the member to remove.

• On success, responds with DeleteMemberOutput
• On failure, responds with SdkError<DeleteMemberError>

impl Client

pub fn delete_node(&self) -> DeleteNodeFluentBuilder

Constructs a fluent builder for the DeleteNode operation.

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network that the node is on.

    Ethereum public networks have the following NetworkIds:

    • n-ethereum-mainnet

    • n-ethereum-goerli

    • n-ethereum-rinkeby

  • member_id(impl ::std::convert::Into<String>) / set_member_id(Option<String>):

    The unique identifier of the member that owns this node.

    Applies only to Hyperledger Fabric and is required for Hyperledger Fabric.

  • node_id(impl ::std::convert::Into<String>) / set_node_id(Option<String>):

    The unique identifier of the node.

• On success, responds with DeleteNodeOutput
• On failure, responds with SdkError<DeleteNodeError>

impl Client

pub fn get_accessor(&self) -> GetAccessorFluentBuilder

Constructs a fluent builder for the GetAccessor operation.

• The fluent builder is configurable:
  • accessor_id(impl ::std::convert::Into<String>) / set_accessor_id(Option<String>):

    The unique identifier of the accessor.

• On success, responds with GetAccessorOutput with field(s):
  • accessor(Option<Accessor>):

    The properties of the accessor.

• On failure, responds with SdkError<GetAccessorError>

impl Client

pub fn get_member(&self) -> GetMemberFluentBuilder

Constructs a fluent builder for the GetMember operation.

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network to which the member belongs.

  • member_id(impl ::std::convert::Into<String>) / set_member_id(Option<String>):

    The unique identifier of the member.

• On success, responds with GetMemberOutput with field(s):
  • member(Option<Member>):

    The properties of a member.

• On failure, responds with SdkError<GetMemberError>

impl Client

pub fn get_network(&self) -> GetNetworkFluentBuilder

Constructs a fluent builder for the GetNetwork operation.

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network to get information about.

• On success, responds with GetNetworkOutput with field(s):
  • network(Option<Network>):

    An object containing network configuration parameters.

• On failure, responds with SdkError<GetNetworkError>

impl Client

pub fn get_node(&self) -> GetNodeFluentBuilder

Constructs a fluent builder for the GetNode operation.

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network that the node is on.

  • member_id(impl ::std::convert::Into<String>) / set_member_id(Option<String>):

    The unique identifier of the member that owns the node.

    Applies only to Hyperledger Fabric and is required for Hyperledger Fabric.

  • node_id(impl ::std::convert::Into<String>) / set_node_id(Option<String>):

    The unique identifier of the node.

• On success, responds with GetNodeOutput with field(s):
  • node(Option<Node>):

    Properties of the node configuration.

• On failure, responds with SdkError<GetNodeError>

impl Client

pub fn get_proposal(&self) -> GetProposalFluentBuilder

Constructs a fluent builder for the GetProposal operation.

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network for which the proposal is made.

  • proposal_id(impl ::std::convert::Into<String>) / set_proposal_id(Option<String>):

    The unique identifier of the proposal.

• On success, responds with GetProposalOutput with field(s):
  • proposal(Option<Proposal>):

    Information about a proposal.

• On failure, responds with SdkError<GetProposalError>

impl Client

pub fn list_accessors(&self) -> ListAccessorsFluentBuilder

Constructs a fluent builder for the ListAccessors operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • max_results(i32) / set_max_results(Option<i32>):

    The maximum number of accessors to list.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On success, responds with ListAccessorsOutput with field(s):
  • accessors(Option<Vec<AccessorSummary>>):

    An array of AccessorSummary objects that contain configuration properties for each accessor.

  • next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On failure, responds with SdkError<ListAccessorsError>

impl Client

pub fn list_invitations(&self) -> ListInvitationsFluentBuilder

Constructs a fluent builder for the ListInvitations operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • max_results(i32) / set_max_results(Option<i32>):

    The maximum number of invitations to return.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On success, responds with ListInvitationsOutput with field(s):
  • invitations(Option<Vec<Invitation>>):

    The invitations for the network.

  • next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On failure, responds with SdkError<ListInvitationsError>

impl Client

pub fn list_members(&self) -> ListMembersFluentBuilder

Constructs a fluent builder for the ListMembers operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network for which to list members.

  • name(impl ::std::convert::Into<String>) / set_name(Option<String>):

    The optional name of the member to list.

  • status(MemberStatus) / set_status(Option<MemberStatus>):

    An optional status specifier. If provided, only members currently in this status are listed.

  • is_owned(bool) / set_is_owned(Option<bool>):

    An optional Boolean value. If provided, the request is limited either to members that the current Amazon Web Services account owns (true) or that other Amazon Web Services accountsn own (false). If omitted, all members are listed.

  • max_results(i32) / set_max_results(Option<i32>):

    The maximum number of members to return in the request.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On success, responds with ListMembersOutput with field(s):
  • members(Option<Vec<MemberSummary>>):

    An array of MemberSummary objects. Each object contains details about a network member.

  • next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On failure, responds with SdkError<ListMembersError>

impl Client

pub fn list_networks(&self) -> ListNetworksFluentBuilder

Constructs a fluent builder for the ListNetworks operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • name(impl ::std::convert::Into<String>) / set_name(Option<String>):

    The name of the network.

  • framework(Framework) / set_framework(Option<Framework>):

    An optional framework specifier. If provided, only networks of this framework type are listed.

  • status(NetworkStatus) / set_status(Option<NetworkStatus>):

    An optional status specifier. If provided, only networks currently in this status are listed.

    Applies only to Hyperledger Fabric.

  • max_results(i32) / set_max_results(Option<i32>):

    The maximum number of networks to list.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On success, responds with ListNetworksOutput with field(s):
  • networks(Option<Vec<NetworkSummary>>):

    An array of NetworkSummary objects that contain configuration properties for each network.

  • next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On failure, responds with SdkError<ListNetworksError>

impl Client

pub fn list_nodes(&self) -> ListNodesFluentBuilder

Constructs a fluent builder for the ListNodes operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network for which to list nodes.

  • member_id(impl ::std::convert::Into<String>) / set_member_id(Option<String>):

    The unique identifier of the member who owns the nodes to list.

    Applies only to Hyperledger Fabric and is required for Hyperledger Fabric.

  • status(NodeStatus) / set_status(Option<NodeStatus>):

    An optional status specifier. If provided, only nodes currently in this status are listed.

  • max_results(i32) / set_max_results(Option<i32>):

    The maximum number of nodes to list.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On success, responds with ListNodesOutput with field(s):
  • nodes(Option<Vec<NodeSummary>>):

    An array of NodeSummary objects that contain configuration properties for each node.

  • next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On failure, responds with SdkError<ListNodesError>

impl Client

pub fn list_proposal_votes(&self) -> ListProposalVotesFluentBuilder

Constructs a fluent builder for the ListProposalVotes operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network.

  • proposal_id(impl ::std::convert::Into<String>) / set_proposal_id(Option<String>):

    The unique identifier of the proposal.

  • max_results(i32) / set_max_results(Option<i32>):

    The maximum number of votes to return.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On success, responds with ListProposalVotesOutput with field(s):
  • proposal_votes(Option<Vec<VoteSummary>>):

    The list of votes.

  • next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On failure, responds with SdkError<ListProposalVotesError>

impl Client

pub fn list_proposals(&self) -> ListProposalsFluentBuilder

Constructs a fluent builder for the ListProposals operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network.

  • max_results(i32) / set_max_results(Option<i32>):

    The maximum number of proposals to return.

  • next_token(impl ::std::convert::Into<String>) / set_next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On success, responds with ListProposalsOutput with field(s):
  • proposals(Option<Vec<ProposalSummary>>):

    The summary of each proposal made on the network.

  • next_token(Option<String>):

    The pagination token that indicates the next set of results to retrieve.

• On failure, responds with SdkError<ListProposalsError>

impl Client

pub fn list_tags_for_resource(&self) -> ListTagsForResourceFluentBuilder

Constructs a fluent builder for the ListTagsForResource operation.

• The fluent builder is configurable:
  • resource_arn(impl ::std::convert::Into<String>) / set_resource_arn(Option<String>):

    The Amazon Resource Name (ARN) of the resource. For more information about ARNs and their format, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

• On success, responds with ListTagsForResourceOutput with field(s):
  • tags(Option<HashMap<String, String>>):

    The tags assigned to the resource.

• On failure, responds with SdkError<ListTagsForResourceError>

impl Client

pub fn reject_invitation(&self) -> RejectInvitationFluentBuilder

Constructs a fluent builder for the RejectInvitation operation.

• The fluent builder is configurable:
  • invitation_id(impl ::std::convert::Into<String>) / set_invitation_id(Option<String>):

    The unique identifier of the invitation to reject.

• On success, responds with RejectInvitationOutput
• On failure, responds with SdkError<RejectInvitationError>

impl Client

pub fn tag_resource(&self) -> TagResourceFluentBuilder

Constructs a fluent builder for the TagResource operation.

• The fluent builder is configurable:
  • resource_arn(impl ::std::convert::Into<String>) / set_resource_arn(Option<String>):

    The Amazon Resource Name (ARN) of the resource. For more information about ARNs and their format, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

  • tags(HashMap<String, String>) / set_tags(Option<HashMap<String, String>>):

    The tags to assign to the specified resource. Tag values can be empty, for example, “MyTagKey” : “”. You can specify multiple key-value pairs in a single request, with an overall maximum of 50 tags added to each resource.

• On success, responds with TagResourceOutput
• On failure, responds with SdkError<TagResourceError>

impl Client

pub fn untag_resource(&self) -> UntagResourceFluentBuilder

Constructs a fluent builder for the UntagResource operation.

• The fluent builder is configurable:
  • resource_arn(impl ::std::convert::Into<String>) / set_resource_arn(Option<String>):

    The Amazon Resource Name (ARN) of the resource. For more information about ARNs and their format, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

  • tag_keys(Vec<String>) / set_tag_keys(Option<Vec<String>>):

    The tag keys.

• On success, responds with UntagResourceOutput
• On failure, responds with SdkError<UntagResourceError>

impl Client

pub fn update_member(&self) -> UpdateMemberFluentBuilder

Constructs a fluent builder for the UpdateMember operation.

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the Managed Blockchain network to which the member belongs.

  • member_id(impl ::std::convert::Into<String>) / set_member_id(Option<String>):

    The unique identifier of the member.

  • log_publishing_configuration(MemberLogPublishingConfiguration) / set_log_publishing_configuration(Option<MemberLogPublishingConfiguration>):

    Configuration properties for publishing to Amazon CloudWatch Logs.

• On success, responds with UpdateMemberOutput
• On failure, responds with SdkError<UpdateMemberError>

impl Client

pub fn update_node(&self) -> UpdateNodeFluentBuilder

Constructs a fluent builder for the UpdateNode operation.

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network that the node is on.

  • member_id(impl ::std::convert::Into<String>) / set_member_id(Option<String>):

    The unique identifier of the member that owns the node.

    Applies only to Hyperledger Fabric.

  • node_id(impl ::std::convert::Into<String>) / set_node_id(Option<String>):

    The unique identifier of the node.

  • log_publishing_configuration(NodeLogPublishingConfiguration) / set_log_publishing_configuration(Option<NodeLogPublishingConfiguration>):

    Configuration properties for publishing to Amazon CloudWatch Logs.

• On success, responds with UpdateNodeOutput
• On failure, responds with SdkError<UpdateNodeError>

impl Client

pub fn vote_on_proposal(&self) -> VoteOnProposalFluentBuilder

Constructs a fluent builder for the VoteOnProposal operation.

• The fluent builder is configurable:
  • network_id(impl ::std::convert::Into<String>) / set_network_id(Option<String>):

    The unique identifier of the network.

  • proposal_id(impl ::std::convert::Into<String>) / set_proposal_id(Option<String>):

    The unique identifier of the proposal.

  • voter_member_id(impl ::std::convert::Into<String>) / set_voter_member_id(Option<String>):

    The unique identifier of the member casting the vote.

  • vote(VoteValue) / set_vote(Option<VoteValue>):

    The value of the vote.

• On success, responds with VoteOnProposalOutput
• On failure, responds with SdkError<VoteOnProposalError>

impl Client

pub fn with_config( client: Client<DynConnector, DynMiddleware<DynConnector>>, conf: Config ) -> Self

Creates a client with the given service configuration.

pub fn conf(&self) -> &Config

Returns the client’s configuration.

impl Client

pub fn new(sdk_config: &SdkConfig) -> Self

Creates a new client from an SDK Config.

Panics

• This method will panic if the sdk_config is missing an async sleep implementation. If you experience this panic, set the sleep_impl on the Config passed into this function to fix it.
• This method will panic if the sdk_config is missing an HTTP connector. If you experience this panic, set the http_connector on the Config passed into this function to fix it.

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Panics

• This method will panic if the conf is missing an async sleep implementation. If you experience this panic, set the sleep_impl on the Config passed into this function to fix it.
• This method will panic if the conf is missing an HTTP connector. If you experience this panic, set the http_connector on the Config passed into this function to fix it.

Trait Implementations

impl Clone for Client

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Client

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl From<Client<DynConnector, DynMiddleware<DynConnector>, Standard>> for Client

fn from(client: Client<DynConnector, DynMiddleware<DynConnector>>) -> Self

Converts to this type from the input type.