#[non_exhaustive]pub struct S3JobDefinition {
pub bucket_criteria: Option<S3BucketCriteriaForJob>,
pub bucket_definitions: Option<Vec<S3BucketDefinitionForJob>>,
pub scoping: Option<Scoping>,
}
Expand description
Specifies which S3 buckets contain the objects that a classification job analyzes, and the scope of that analysis. The bucket specification can be static (bucketDefinitions) or dynamic (bucketCriteria). If it's static, the job analyzes objects in the same predefined set of buckets each time the job runs. If it's dynamic, the job analyzes objects in any buckets that match the specified criteria each time the job starts to run.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.bucket_criteria: Option<S3BucketCriteriaForJob>
The property- and tag-based conditions that determine which S3 buckets to include or exclude from the analysis. Each time the job runs, the job uses these criteria to determine which buckets contain objects to analyze. A job's definition can contain a bucketCriteria object or a bucketDefinitions array, not both.
bucket_definitions: Option<Vec<S3BucketDefinitionForJob>>
An array of objects, one for each Amazon Web Services account that owns specific S3 buckets to analyze. Each object specifies the account ID for an account and one or more buckets to analyze for that account. A job's definition can contain a bucketDefinitions array or a bucketCriteria object, not both.
scoping: Option<Scoping>
The property- and tag-based conditions that determine which S3 objects to include or exclude from the analysis. Each time the job runs, the job uses these criteria to determine which objects to analyze.
Implementations§
Source§impl S3JobDefinition
impl S3JobDefinition
Sourcepub fn bucket_criteria(&self) -> Option<&S3BucketCriteriaForJob>
pub fn bucket_criteria(&self) -> Option<&S3BucketCriteriaForJob>
The property- and tag-based conditions that determine which S3 buckets to include or exclude from the analysis. Each time the job runs, the job uses these criteria to determine which buckets contain objects to analyze. A job's definition can contain a bucketCriteria object or a bucketDefinitions array, not both.
Sourcepub fn bucket_definitions(&self) -> &[S3BucketDefinitionForJob]
pub fn bucket_definitions(&self) -> &[S3BucketDefinitionForJob]
An array of objects, one for each Amazon Web Services account that owns specific S3 buckets to analyze. Each object specifies the account ID for an account and one or more buckets to analyze for that account. A job's definition can contain a bucketDefinitions array or a bucketCriteria object, not both.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .bucket_definitions.is_none()
.
Source§impl S3JobDefinition
impl S3JobDefinition
Sourcepub fn builder() -> S3JobDefinitionBuilder
pub fn builder() -> S3JobDefinitionBuilder
Creates a new builder-style object to manufacture S3JobDefinition
.
Trait Implementations§
Source§impl Clone for S3JobDefinition
impl Clone for S3JobDefinition
Source§fn clone(&self) -> S3JobDefinition
fn clone(&self) -> S3JobDefinition
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for S3JobDefinition
impl Debug for S3JobDefinition
Source§impl PartialEq for S3JobDefinition
impl PartialEq for S3JobDefinition
impl StructuralPartialEq for S3JobDefinition
Auto Trait Implementations§
impl Freeze for S3JobDefinition
impl RefUnwindSafe for S3JobDefinition
impl Send for S3JobDefinition
impl Sync for S3JobDefinition
impl Unpin for S3JobDefinition
impl UnwindSafe for S3JobDefinition
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);