pub struct CreateDatasetFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateDataset.
Creates a new dataset in an Amazon Lookout for Vision project. CreateDataset can create a training or a test dataset from a valid dataset source (DatasetSource).
If you want a single dataset project, specify train for the value of DatasetType.
To have a project with separate training and test datasets, call CreateDataset twice. On the first call, specify train for the value of DatasetType. On the second call, specify test for the value of DatasetType.
This operation requires permissions to perform the lookoutvision:CreateDataset operation.
Implementations§
Source§impl CreateDatasetFluentBuilder
impl CreateDatasetFluentBuilder
Sourcepub fn as_input(&self) -> &CreateDatasetInputBuilder
pub fn as_input(&self) -> &CreateDatasetInputBuilder
Access the CreateDataset as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateDatasetOutput, SdkError<CreateDatasetError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateDatasetOutput, SdkError<CreateDatasetError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateDatasetOutput, CreateDatasetError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateDatasetOutput, CreateDatasetError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn project_name(self, input: impl Into<String>) -> Self
pub fn project_name(self, input: impl Into<String>) -> Self
The name of the project in which you want to create a dataset.
Sourcepub fn set_project_name(self, input: Option<String>) -> Self
pub fn set_project_name(self, input: Option<String>) -> Self
The name of the project in which you want to create a dataset.
Sourcepub fn get_project_name(&self) -> &Option<String>
pub fn get_project_name(&self) -> &Option<String>
The name of the project in which you want to create a dataset.
Sourcepub fn dataset_type(self, input: impl Into<String>) -> Self
pub fn dataset_type(self, input: impl Into<String>) -> Self
The type of the dataset. Specify train for a training dataset. Specify test for a test dataset.
Sourcepub fn set_dataset_type(self, input: Option<String>) -> Self
pub fn set_dataset_type(self, input: Option<String>) -> Self
The type of the dataset. Specify train for a training dataset. Specify test for a test dataset.
Sourcepub fn get_dataset_type(&self) -> &Option<String>
pub fn get_dataset_type(&self) -> &Option<String>
The type of the dataset. Specify train for a training dataset. Specify test for a test dataset.
Sourcepub fn dataset_source(self, input: DatasetSource) -> Self
pub fn dataset_source(self, input: DatasetSource) -> Self
The location of the manifest file that Amazon Lookout for Vision uses to create the dataset.
If you don't specify DatasetSource, an empty dataset is created and the operation synchronously returns. Later, you can add JSON Lines by calling UpdateDatasetEntries.
If you specify a value for DataSource, the manifest at the S3 location is validated and used to create the dataset. The call to CreateDataset is asynchronous and might take a while to complete. To find out the current status, Check the value of Status returned in a call to DescribeDataset.
Sourcepub fn set_dataset_source(self, input: Option<DatasetSource>) -> Self
pub fn set_dataset_source(self, input: Option<DatasetSource>) -> Self
The location of the manifest file that Amazon Lookout for Vision uses to create the dataset.
If you don't specify DatasetSource, an empty dataset is created and the operation synchronously returns. Later, you can add JSON Lines by calling UpdateDatasetEntries.
If you specify a value for DataSource, the manifest at the S3 location is validated and used to create the dataset. The call to CreateDataset is asynchronous and might take a while to complete. To find out the current status, Check the value of Status returned in a call to DescribeDataset.
Sourcepub fn get_dataset_source(&self) -> &Option<DatasetSource>
pub fn get_dataset_source(&self) -> &Option<DatasetSource>
The location of the manifest file that Amazon Lookout for Vision uses to create the dataset.
If you don't specify DatasetSource, an empty dataset is created and the operation synchronously returns. Later, you can add JSON Lines by calling UpdateDatasetEntries.
If you specify a value for DataSource, the manifest at the S3 location is validated and used to create the dataset. The call to CreateDataset is asynchronous and might take a while to complete. To find out the current status, Check the value of Status returned in a call to DescribeDataset.
Sourcepub fn client_token(self, input: impl Into<String>) -> Self
pub fn client_token(self, input: impl Into<String>) -> Self
ClientToken is an idempotency token that ensures a call to CreateDataset completes only once. You choose the value to pass. For example, An issue might prevent you from getting a response from CreateDataset. In this case, safely retry your call to CreateDataset by using the same ClientToken parameter value.
If you don't supply a value for ClientToken, the AWS SDK you are using inserts a value for you. This prevents retries after a network error from making multiple dataset creation requests. You'll need to provide your own value for other use cases.
An error occurs if the other input parameters are not the same as in the first request. Using a different value for ClientToken is considered a new call to CreateDataset. An idempotency token is active for 8 hours.
Sourcepub fn set_client_token(self, input: Option<String>) -> Self
pub fn set_client_token(self, input: Option<String>) -> Self
ClientToken is an idempotency token that ensures a call to CreateDataset completes only once. You choose the value to pass. For example, An issue might prevent you from getting a response from CreateDataset. In this case, safely retry your call to CreateDataset by using the same ClientToken parameter value.
If you don't supply a value for ClientToken, the AWS SDK you are using inserts a value for you. This prevents retries after a network error from making multiple dataset creation requests. You'll need to provide your own value for other use cases.
An error occurs if the other input parameters are not the same as in the first request. Using a different value for ClientToken is considered a new call to CreateDataset. An idempotency token is active for 8 hours.
Sourcepub fn get_client_token(&self) -> &Option<String>
pub fn get_client_token(&self) -> &Option<String>
ClientToken is an idempotency token that ensures a call to CreateDataset completes only once. You choose the value to pass. For example, An issue might prevent you from getting a response from CreateDataset. In this case, safely retry your call to CreateDataset by using the same ClientToken parameter value.
If you don't supply a value for ClientToken, the AWS SDK you are using inserts a value for you. This prevents retries after a network error from making multiple dataset creation requests. You'll need to provide your own value for other use cases.
An error occurs if the other input parameters are not the same as in the first request. Using a different value for ClientToken is considered a new call to CreateDataset. An idempotency token is active for 8 hours.
Trait Implementations§
Source§impl Clone for CreateDatasetFluentBuilder
impl Clone for CreateDatasetFluentBuilder
Source§fn clone(&self) -> CreateDatasetFluentBuilder
fn clone(&self) -> CreateDatasetFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateDatasetFluentBuilder
impl !RefUnwindSafe for CreateDatasetFluentBuilder
impl Send for CreateDatasetFluentBuilder
impl Sync for CreateDatasetFluentBuilder
impl Unpin for CreateDatasetFluentBuilder
impl !UnwindSafe for CreateDatasetFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);