aws_sdk_lightsail::operation::create_container_service::builders

Struct CreateContainerServiceInputBuilder

#[non_exhaustive]
pub struct CreateContainerServiceInputBuilder { /* private fields */ }

Expand description

A builder for CreateContainerServiceInput.

Implementations§

Source §

impl CreateContainerServiceInputBuilder

Source

pub fn service_name(self, input: impl Into<String>) -> Self

The name for the container service.

The name that you specify for your container service will make up part of its default domain. The default domain of a container service is typically https:// . . .cs.amazonlightsail.com. If the name of your container service is container-service-1, and it's located in the US East (Ohio) Amazon Web Services Region (us-east-2), then the domain for your container service will be like the following example: https://container-service-1.ur4EXAMPLE2uq.us-east-2.cs.amazonlightsail.com

The following are the requirements for container service names:

Must be unique within each Amazon Web Services Region in your Lightsail account.
Must contain 1 to 63 characters.
Must contain only alphanumeric characters and hyphens.
A hyphen (-) can separate words but cannot be at the start or end of the name.

This field is required.

Source

pub fn set_service_name(self, input: Option<String>) -> Self

The name for the container service.

The name that you specify for your container service will make up part of its default domain. The default domain of a container service is typically https:// . . .cs.amazonlightsail.com. If the name of your container service is container-service-1, and it's located in the US East (Ohio) Amazon Web Services Region (us-east-2), then the domain for your container service will be like the following example: https://container-service-1.ur4EXAMPLE2uq.us-east-2.cs.amazonlightsail.com

The following are the requirements for container service names:

Must be unique within each Amazon Web Services Region in your Lightsail account.
Must contain 1 to 63 characters.
Must contain only alphanumeric characters and hyphens.
A hyphen (-) can separate words but cannot be at the start or end of the name.

Source

pub fn get_service_name(&self) -> &Option<String>

The name for the container service.

The name that you specify for your container service will make up part of its default domain. The default domain of a container service is typically https:// . . .cs.amazonlightsail.com. If the name of your container service is container-service-1, and it's located in the US East (Ohio) Amazon Web Services Region (us-east-2), then the domain for your container service will be like the following example: https://container-service-1.ur4EXAMPLE2uq.us-east-2.cs.amazonlightsail.com

The following are the requirements for container service names:

Must be unique within each Amazon Web Services Region in your Lightsail account.
Must contain 1 to 63 characters.
Must contain only alphanumeric characters and hyphens.
A hyphen (-) can separate words but cannot be at the start or end of the name.

Source

pub fn power(self, input: ContainerServicePowerName) -> Self

The power specification for the container service.

The power specifies the amount of memory, vCPUs, and base monthly cost of each node of the container service. The power and scale of a container service makes up its configured capacity. To determine the monthly price of your container service, multiply the base price of the power with the scale (the number of nodes) of the service.

Use the GetContainerServicePowers action to get a list of power options that you can specify using this parameter, and their base monthly cost.

This field is required.

Source

pub fn set_power(self, input: Option<ContainerServicePowerName>) -> Self

The power specification for the container service.

The power specifies the amount of memory, vCPUs, and base monthly cost of each node of the container service. The power and scale of a container service makes up its configured capacity. To determine the monthly price of your container service, multiply the base price of the power with the scale (the number of nodes) of the service.

Use the GetContainerServicePowers action to get a list of power options that you can specify using this parameter, and their base monthly cost.

Source

pub fn get_power(&self) -> &Option<ContainerServicePowerName>

The power specification for the container service.

The power specifies the amount of memory, vCPUs, and base monthly cost of each node of the container service. The power and scale of a container service makes up its configured capacity. To determine the monthly price of your container service, multiply the base price of the power with the scale (the number of nodes) of the service.

Use the GetContainerServicePowers action to get a list of power options that you can specify using this parameter, and their base monthly cost.

Source

pub fn scale(self, input: i32) -> Self

The scale specification for the container service.

The scale specifies the allocated compute nodes of the container service. The power and scale of a container service makes up its configured capacity. To determine the monthly price of your container service, multiply the base price of the power with the scale (the number of nodes) of the service.

This field is required.

Source

pub fn set_scale(self, input: Option<i32>) -> Self

The scale specification for the container service.

The scale specifies the allocated compute nodes of the container service. The power and scale of a container service makes up its configured capacity. To determine the monthly price of your container service, multiply the base price of the power with the scale (the number of nodes) of the service.

Source

pub fn get_scale(&self) -> &Option<i32>

The scale specification for the container service.

The scale specifies the allocated compute nodes of the container service. The power and scale of a container service makes up its configured capacity. To determine the monthly price of your container service, multiply the base price of the power with the scale (the number of nodes) of the service.

Source

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

The tag keys and optional values to add to the container service during create.

Use the TagResource action to tag a resource after it's created.

For more information about tags in Lightsail, see the Amazon Lightsail Developer Guide.

Source

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

The tag keys and optional values to add to the container service during create.

Use the TagResource action to tag a resource after it's created.

For more information about tags in Lightsail, see the Amazon Lightsail Developer Guide.

Source

pub fn get_tags(&self) -> &Option<Vec<Tag>>

The tag keys and optional values to add to the container service during create.

Use the TagResource action to tag a resource after it's created.

For more information about tags in Lightsail, see the Amazon Lightsail Developer Guide.

Source

pub fn public_domain_names(self, k: impl Into<String>, v: Vec<String>) -> Self

Adds a key-value pair to public_domain_names.

To override the contents of this collection use set_public_domain_names.

The public domain names to use with the container service, such as example.com and www.example.com.

You can specify up to four public domain names for a container service. The domain names that you specify are used when you create a deployment with a container configured as the public endpoint of your container service.

If you don't specify public domain names, then you can use the default domain of the container service.

You must create and validate an SSL/TLS certificate before you can use public domain names with your container service. Use the CreateCertificate action to create a certificate for the public domain names you want to use with your container service.

You can specify public domain names using a string to array map as shown in the example later on this page.

Source

pub fn set_public_domain_names( self, input: Option<HashMap<String, Vec<String>>>, ) -> Self

The public domain names to use with the container service, such as example.com and www.example.com.

You can specify up to four public domain names for a container service. The domain names that you specify are used when you create a deployment with a container configured as the public endpoint of your container service.

If you don't specify public domain names, then you can use the default domain of the container service.

You must create and validate an SSL/TLS certificate before you can use public domain names with your container service. Use the CreateCertificate action to create a certificate for the public domain names you want to use with your container service.

You can specify public domain names using a string to array map as shown in the example later on this page.

Source

pub fn get_public_domain_names(&self) -> &Option<HashMap<String, Vec<String>>>

The public domain names to use with the container service, such as example.com and www.example.com.

You can specify up to four public domain names for a container service. The domain names that you specify are used when you create a deployment with a container configured as the public endpoint of your container service.

If you don't specify public domain names, then you can use the default domain of the container service.

You must create and validate an SSL/TLS certificate before you can use public domain names with your container service. Use the CreateCertificate action to create a certificate for the public domain names you want to use with your container service.

You can specify public domain names using a string to array map as shown in the example later on this page.

Source

pub fn deployment(self, input: ContainerServiceDeploymentRequest) -> Self

An object that describes a deployment for the container service.

A deployment specifies the containers that will be launched on the container service and their settings, such as the ports to open, the environment variables to apply, and the launch command to run. It also specifies the container that will serve as the public endpoint of the deployment and its settings, such as the HTTP or HTTPS port to use, and the health check configuration.

Source

pub fn set_deployment( self, input: Option<ContainerServiceDeploymentRequest>, ) -> Self

An object that describes a deployment for the container service.

A deployment specifies the containers that will be launched on the container service and their settings, such as the ports to open, the environment variables to apply, and the launch command to run. It also specifies the container that will serve as the public endpoint of the deployment and its settings, such as the HTTP or HTTPS port to use, and the health check configuration.

Source

pub fn get_deployment(&self) -> &Option<ContainerServiceDeploymentRequest>

An object that describes a deployment for the container service.

A deployment specifies the containers that will be launched on the container service and their settings, such as the ports to open, the environment variables to apply, and the launch command to run. It also specifies the container that will serve as the public endpoint of the deployment and its settings, such as the HTTP or HTTPS port to use, and the health check configuration.

Source

pub fn private_registry_access( self, input: PrivateRegistryAccessRequest, ) -> Self

An object to describe the configuration for the container service to access private container image repositories, such as Amazon Elastic Container Registry (Amazon ECR) private repositories.

For more information, see Configuring access to an Amazon ECR private repository for an Amazon Lightsail container service in the Amazon Lightsail Developer Guide.

Source

pub fn set_private_registry_access( self, input: Option<PrivateRegistryAccessRequest>, ) -> Self

An object to describe the configuration for the container service to access private container image repositories, such as Amazon Elastic Container Registry (Amazon ECR) private repositories.

For more information, see Configuring access to an Amazon ECR private repository for an Amazon Lightsail container service in the Amazon Lightsail Developer Guide.

Source

pub fn get_private_registry_access( &self, ) -> &Option<PrivateRegistryAccessRequest>

An object to describe the configuration for the container service to access private container image repositories, such as Amazon Elastic Container Registry (Amazon ECR) private repositories.

For more information, see Configuring access to an Amazon ECR private repository for an Amazon Lightsail container service in the Amazon Lightsail Developer Guide.

Source

pub fn build(self) -> Result<CreateContainerServiceInput, BuildError>

Consumes the builder and constructs a CreateContainerServiceInput.

Source §

impl CreateContainerServiceInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<CreateContainerServiceOutput, SdkError<CreateContainerServiceError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source §

impl Clone for CreateContainerServiceInputBuilder

Source §

fn clone(&self) -> CreateContainerServiceInputBuilder

Returns a duplicate of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

Source §

impl Debug for CreateContainerServiceInputBuilder

Source §

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Source §

impl Default for CreateContainerServiceInputBuilder

Source §

fn default() -> CreateContainerServiceInputBuilder

Returns the “default value” for a type. Read more

Source §

impl PartialEq for CreateContainerServiceInputBuilder

Source §

fn eq(&self, other: &CreateContainerServiceInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

Source §

impl StructuralPartialEq for CreateContainerServiceInputBuilder

Auto Trait Implementations§

§

impl UnwindSafe for CreateContainerServiceInputBuilder

Blanket Implementations§

Source §

impl<T> Any for T
where T: 'static + ?Sized,

Source §

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

Source §

impl<T> Borrow<T> for T
where T: ?Sized,

Source §

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

Source §

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source §

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

Source §

impl<T> CloneToUninit for T
where T: Clone,

Source §

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

Source §

impl<T> From<T> for T

Source §

fn from(t: T) -> T

Returns the argument unchanged.

Source §

impl<T> Instrument for T

Source §

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Source §

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Source §

impl<T, U> Into for T
where U: From<T>,

Source §

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source §

impl<T> IntoEither for T

Source §

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source §

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

Source §

impl<T> Paint for T
where T: ?Sized,

Source §

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

Source §

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example

println!("{}", value.primary());

Source §

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example

println!("{}", value.fixed(color));

Source §

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example

println!("{}", value.rgb(r, g, b));

Source §

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example

println!("{}", value.black());

Source §

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example

println!("{}", value.red());

Source §

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example

println!("{}", value.green());

Source §

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example

println!("{}", value.yellow());

Source §

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example

println!("{}", value.blue());

Source §

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example

println!("{}", value.magenta());

Source §

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example

println!("{}", value.cyan());

Source §

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example

println!("{}", value.white());

Source §

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example

println!("{}", value.bright_black());

Source §

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example

println!("{}", value.bright_red());

Source §

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example

println!("{}", value.bright_green());

Source §

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example

println!("{}", value.bright_yellow());

Source §

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example

println!("{}", value.bright_blue());

Source §

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.bright_magenta());

Source §

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example

println!("{}", value.bright_cyan());

Source §

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example

println!("{}", value.bright_white());

Source §

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

Source §

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example

println!("{}", value.on_primary());

Source §

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example

println!("{}", value.on_fixed(color));

Source §

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example

println!("{}", value.on_rgb(r, g, b));

Source §

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example

println!("{}", value.on_black());

Source §

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example

println!("{}", value.on_red());

Source §

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example

println!("{}", value.on_green());

Source §

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example

println!("{}", value.on_yellow());

Source §

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example

println!("{}", value.on_blue());

Source §

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example

println!("{}", value.on_magenta());

Source §

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example

println!("{}", value.on_cyan());

Source §

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example

println!("{}", value.on_white());

Source §

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example

println!("{}", value.on_bright_black());

Source §

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example

println!("{}", value.on_bright_red());

Source §

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example

println!("{}", value.on_bright_green());

Source §

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example

println!("{}", value.on_bright_yellow());

Source §

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example

println!("{}", value.on_bright_blue());

Source §

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.on_bright_magenta());

Source §

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example

println!("{}", value.on_bright_cyan());

Source §

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example

println!("{}", value.on_bright_white());

Source §

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

Source §

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example

println!("{}", value.bold());

Source §

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example

println!("{}", value.dim());

Source §

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example

println!("{}", value.italic());

Source §

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example

println!("{}", value.underline());

Source §

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Blink].

§Example

println!("{}", value.blink());

Source §

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example

println!("{}", value.rapid_blink());

Source §

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example

println!("{}", value.invert());

Source §

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example

println!("{}", value.conceal());

Source §

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example

println!("{}", value.strike());

Source §

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

Source §

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example

println!("{}", value.mask());

Source §

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example

println!("{}", value.wrap());

Source §

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example

println!("{}", value.linger());

Source §

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example

println!("{}", value.clear());

Source §

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example

println!("{}", value.resetting());

Source §

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example

println!("{}", value.bright());

Source §

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example

println!("{}", value.on_bright());

Source §

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

Source §

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

Source §

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

Source §

impl<T> Same for T

Source §

type Output = T

Should always be Self

Source §

impl<T> ToOwned for T
where T: Clone,

Source §

type Owned = T

The resulting type after obtaining ownership.

Source §

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

Source §

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

Source §

impl<T, U> TryFrom for T
where U: Into<T>,

Source §

type Error = Infallible

The type returned in the event of a conversion error.

Source §

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

Source §

impl<T, U> TryInto for T
where U: TryFrom<T>,

Source §

type Error = >::Error

The type returned in the event of a conversion error.

Source §

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Source §

impl<T> WithSubscriber for T

Source §

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

CreateContainerServiceInputBuilder

Struct CreateContainerServiceInputBuilder Copy item path

Implementations§

impl CreateContainerServiceInputBuilder

pub fn service_name(self, input: impl Into<String>) -> Self

pub fn set_service_name(self, input: Option<String>) -> Self

pub fn get_service_name(&self) -> &Option<String>

pub fn power(self, input: ContainerServicePowerName) -> Self

pub fn set_power(self, input: Option<ContainerServicePowerName>) -> Self

pub fn get_power(&self) -> &Option<ContainerServicePowerName>

pub fn scale(self, input: i32) -> Self

pub fn set_scale(self, input: Option<i32>) -> Self

pub fn get_scale(&self) -> &Option<i32>

pub fn tags(self, input: Tag) -> Self

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

pub fn get_tags(&self) -> &Option<Vec<Tag>>

pub fn public_domain_names(self, k: impl Into<String>, v: Vec<String>) -> Self

pub fn set_public_domain_names( self, input: Option<HashMap<String, Vec<String>>>, ) -> Self

pub fn get_public_domain_names(&self) -> &Option<HashMap<String, Vec<String>>>

pub fn deployment(self, input: ContainerServiceDeploymentRequest) -> Self

pub fn set_deployment( self, input: Option<ContainerServiceDeploymentRequest>, ) -> Self

pub fn get_deployment(&self) -> &Option<ContainerServiceDeploymentRequest>

pub fn private_registry_access( self, input: PrivateRegistryAccessRequest, ) -> Self

pub fn set_private_registry_access( self, input: Option<PrivateRegistryAccessRequest>, ) -> Self

pub fn get_private_registry_access( &self, ) -> &Option<PrivateRegistryAccessRequest>

pub fn build(self) -> Result<CreateContainerServiceInput, BuildError>

impl CreateContainerServiceInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<CreateContainerServiceOutput, SdkError<CreateContainerServiceError, HttpResponse>>

Trait Implementations§

impl Clone for CreateContainerServiceInputBuilder

fn clone(&self) -> CreateContainerServiceInputBuilder

fn clone_from(&mut self, source: &Self)

impl Debug for CreateContainerServiceInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Default for CreateContainerServiceInputBuilder

fn default() -> CreateContainerServiceInputBuilder

impl PartialEq for CreateContainerServiceInputBuilder

fn eq(&self, other: &CreateContainerServiceInputBuilder) -> bool

fn ne(&self, other: &Rhs) -> bool

impl StructuralPartialEq for CreateContainerServiceInputBuilder

Auto Trait Implementations§

impl Freeze for CreateContainerServiceInputBuilder

impl RefUnwindSafe for CreateContainerServiceInputBuilder

impl Send for CreateContainerServiceInputBuilder

impl Sync for CreateContainerServiceInputBuilder

impl Unpin for CreateContainerServiceInputBuilder

impl UnwindSafe for CreateContainerServiceInputBuilder

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> CloneToUninit for Twhere T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

impl<T> From<T> for T

fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unsharedwhere Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

impl<T> Paint for Twhere T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

§Example

fn primary(&self) -> Painted<&T>

§Example

fn fixed(&self, color: u8) -> Painted<&T>

§Example

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

§Example

fn black(&self) -> Painted<&T>

§Example

fn red(&self) -> Painted<&T>

Struct CreateContainerServiceInputBuilder

impl<T> Any for T
where T: 'static + ?Sized,

impl<T> Borrow<T> for T
where T: ?Sized,

impl<T> BorrowMut<T> for T
where T: ?Sized,

impl<T> CloneToUninit for T
where T: Clone,

impl<T, U> Into<U> for T
where U: From<T>,

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

impl<T> Paint for T
where T: ?Sized,