aws_sdk_kms::operation::import_key_material::builders

Struct ImportKeyMaterialFluentBuilder

Source 
pub struct ImportKeyMaterialFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to ImportKeyMaterial.

Imports or reimports key material into an existing KMS key that was created without key material. You can also use this operation to set or update the expiration model and expiration date of the imported key material.

By default, KMS creates KMS keys with key material that it generates. You can also generate and import your own key material. For more information about importing key material, see Importing key material.

For asymmetric, HMAC and multi-Region keys, you cannot change the key material after the initial import. You can import multiple key materials into single-Region, symmetric encryption keys and rotate the key material on demand using RotateKeyOnDemand.

After you import key material, you can reimport the same key material into that KMS key or, if the key supports on-demand rotation, import new key material. You can use the ImportType parameter to indicate whether you are importing new key material or re-importing previously imported key material. You might reimport key material to replace key material that expired or key material that you deleted. You might also reimport key material to change the expiration model or expiration date of the key material.

Each time you import key material into KMS, you can determine whether (ExpirationModel) and when (ValidTo) the key material expires. To change the expiration of your key material, you must import it again, either by calling ImportKeyMaterial or using the import features of the KMS console.

Before you call ImportKeyMaterial, complete these steps:

  • Create or identify a KMS key with EXTERNAL origin, which indicates that the KMS key is designed for imported key material.

    To create a new KMS key for imported key material, call the CreateKey operation with an Origin value of EXTERNAL. You can create a symmetric encryption KMS key, HMAC KMS key, asymmetric encryption KMS key, asymmetric key agreement key, or asymmetric signing KMS key. You can also import key material into a multi-Region key of any supported type. However, you can't import key material into a KMS key in a custom key store.

  • Call the GetParametersForImport operation to get a public key and import token set for importing key material.

  • Use the public key in the GetParametersForImport response to encrypt your key material.

Then, in an ImportKeyMaterial request, you submit your encrypted key material and import token. When calling this operation, you must specify the following values:

  • The key ID or key ARN of the KMS key to associate with the imported key material. Its Origin must be EXTERNAL and its KeyState must be PendingImport. You cannot perform this operation on a KMS key in a custom key store, or on a KMS key in a different Amazon Web Services account. To get the Origin and KeyState of a KMS key, call DescribeKey.

  • The encrypted key material.

  • The import token that GetParametersForImport returned. You must use a public key and token from the same GetParametersForImport response.

  • Whether the key material expires (ExpirationModel) and, if so, when (ValidTo). For help with this choice, see Setting an expiration time in the Key Management Service Developer Guide.

    If you set an expiration date, KMS deletes the key material from the KMS key on the specified date, making the KMS key unusable. To use the KMS key in cryptographic operations again, you must reimport the same key material. However, you can delete and reimport the key material at any time, including before the key material expires. Each time you reimport, you can eliminate or reset the expiration time.

When this operation is successful, the key state of the KMS key changes from PendingImport to Enabled, and you can use the KMS key in cryptographic operations. For single-Region, symmetric encryption keys, you will need to import all of the key materials associated with the KMS key to change its state to Enabled. Use the ListKeyRotations operation to list the ID and import state of each key material associated with a KMS key.

If this operation fails, use the exception to help determine the problem. If the error is related to the key material, the import token, or wrapping key, use GetParametersForImport to get a new public key and import token for the KMS key and repeat the import procedure. For help, see Create a KMS key with imported key material in the Key Management Service Developer Guide.

The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.

Cross-account use: No. You cannot perform this operation on a KMS key in a different Amazon Web Services account.

Required permissions: kms:ImportKeyMaterial (key policy)

Related operations:

  • DeleteImportedKeyMaterial

  • GetParametersForImport

  • ListKeyRotations

  • RotateKeyOnDemand

Eventual consistency: The KMS API follows an eventual consistency model. For more information, see KMS eventual consistency.

Implementations§

Source§

impl ImportKeyMaterialFluentBuilder

Source

pub fn as_input(&self) -> &ImportKeyMaterialInputBuilder

Access the ImportKeyMaterial as a reference.

Source

pub async fn send( self, ) -> Result<ImportKeyMaterialOutput, SdkError<ImportKeyMaterialError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

Source

pub fn customize( self, ) -> CustomizableOperation<ImportKeyMaterialOutput, ImportKeyMaterialError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

Source

pub fn key_id(self, input: impl Into<String>) -> Self

The identifier of the KMS key that will be associated with the imported key material. This must be the same KMS key specified in the KeyID parameter of the corresponding GetParametersForImport request. The Origin of the KMS key must be EXTERNAL and its KeyState must be PendingImport.

The KMS key can be a symmetric encryption KMS key, HMAC KMS key, asymmetric encryption KMS key, or asymmetric signing KMS key, including a multi-Region key of any supported type. You cannot perform this operation on a KMS key in a custom key store, or on a KMS key in a different Amazon Web Services account.

Specify the key ID or key ARN of the KMS key.

For example:

  • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

  • Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey.

Source

pub fn set_key_id(self, input: Option<String>) -> Self

The identifier of the KMS key that will be associated with the imported key material. This must be the same KMS key specified in the KeyID parameter of the corresponding GetParametersForImport request. The Origin of the KMS key must be EXTERNAL and its KeyState must be PendingImport.

The KMS key can be a symmetric encryption KMS key, HMAC KMS key, asymmetric encryption KMS key, or asymmetric signing KMS key, including a multi-Region key of any supported type. You cannot perform this operation on a KMS key in a custom key store, or on a KMS key in a different Amazon Web Services account.

Specify the key ID or key ARN of the KMS key.

For example:

  • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

  • Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey.

Source

pub fn get_key_id(&self) -> &Option<String>

The identifier of the KMS key that will be associated with the imported key material. This must be the same KMS key specified in the KeyID parameter of the corresponding GetParametersForImport request. The Origin of the KMS key must be EXTERNAL and its KeyState must be PendingImport.

The KMS key can be a symmetric encryption KMS key, HMAC KMS key, asymmetric encryption KMS key, or asymmetric signing KMS key, including a multi-Region key of any supported type. You cannot perform this operation on a KMS key in a custom key store, or on a KMS key in a different Amazon Web Services account.

Specify the key ID or key ARN of the KMS key.

For example:

  • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

  • Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey.

Source

pub fn import_token(self, input: Blob) -> Self

The import token that you received in the response to a previous GetParametersForImport request. It must be from the same response that contained the public key that you used to encrypt the key material.

Source

pub fn set_import_token(self, input: Option<Blob>) -> Self

The import token that you received in the response to a previous GetParametersForImport request. It must be from the same response that contained the public key that you used to encrypt the key material.

Source

pub fn get_import_token(&self) -> &Option<Blob>

The import token that you received in the response to a previous GetParametersForImport request. It must be from the same response that contained the public key that you used to encrypt the key material.

Source

pub fn encrypted_key_material(self, input: Blob) -> Self

The encrypted key material to import. The key material must be encrypted under the public wrapping key that GetParametersForImport returned, using the wrapping algorithm that you specified in the same GetParametersForImport request.

Source

pub fn set_encrypted_key_material(self, input: Option<Blob>) -> Self

The encrypted key material to import. The key material must be encrypted under the public wrapping key that GetParametersForImport returned, using the wrapping algorithm that you specified in the same GetParametersForImport request.

Source

pub fn get_encrypted_key_material(&self) -> &Option<Blob>

The encrypted key material to import. The key material must be encrypted under the public wrapping key that GetParametersForImport returned, using the wrapping algorithm that you specified in the same GetParametersForImport request.

Source

pub fn valid_to(self, input: DateTime) -> Self

The date and time when the imported key material expires. This parameter is required when the value of the ExpirationModel parameter is KEY_MATERIAL_EXPIRES. Otherwise it is not valid.

The value of this parameter must be a future date and time. The maximum value is 365 days from the request date.

When the key material expires, KMS deletes the key material from the KMS key. Without its key material, the KMS key is unusable. To use the KMS key in cryptographic operations, you must reimport the same key material.

You cannot change the ExpirationModel or ValidTo values for the current import after the request completes. To change either value, you must delete (DeleteImportedKeyMaterial) and reimport the key material.

Source

pub fn set_valid_to(self, input: Option<DateTime>) -> Self

The date and time when the imported key material expires. This parameter is required when the value of the ExpirationModel parameter is KEY_MATERIAL_EXPIRES. Otherwise it is not valid.

The value of this parameter must be a future date and time. The maximum value is 365 days from the request date.

When the key material expires, KMS deletes the key material from the KMS key. Without its key material, the KMS key is unusable. To use the KMS key in cryptographic operations, you must reimport the same key material.

You cannot change the ExpirationModel or ValidTo values for the current import after the request completes. To change either value, you must delete (DeleteImportedKeyMaterial) and reimport the key material.

Source

pub fn get_valid_to(&self) -> &Option<DateTime>

The date and time when the imported key material expires. This parameter is required when the value of the ExpirationModel parameter is KEY_MATERIAL_EXPIRES. Otherwise it is not valid.

The value of this parameter must be a future date and time. The maximum value is 365 days from the request date.

When the key material expires, KMS deletes the key material from the KMS key. Without its key material, the KMS key is unusable. To use the KMS key in cryptographic operations, you must reimport the same key material.

You cannot change the ExpirationModel or ValidTo values for the current import after the request completes. To change either value, you must delete (DeleteImportedKeyMaterial) and reimport the key material.

Source

pub fn expiration_model(self, input: ExpirationModelType) -> Self

Specifies whether the key material expires. The default is KEY_MATERIAL_EXPIRES. For help with this choice, see Setting an expiration time in the Key Management Service Developer Guide.

When the value of ExpirationModel is KEY_MATERIAL_EXPIRES, you must specify a value for the ValidTo parameter. When value is KEY_MATERIAL_DOES_NOT_EXPIRE, you must omit the ValidTo parameter.

You cannot change the ExpirationModel or ValidTo values for the current import after the request completes. To change either value, you must reimport the key material.

Source

pub fn set_expiration_model(self, input: Option<ExpirationModelType>) -> Self

Specifies whether the key material expires. The default is KEY_MATERIAL_EXPIRES. For help with this choice, see Setting an expiration time in the Key Management Service Developer Guide.

When the value of ExpirationModel is KEY_MATERIAL_EXPIRES, you must specify a value for the ValidTo parameter. When value is KEY_MATERIAL_DOES_NOT_EXPIRE, you must omit the ValidTo parameter.

You cannot change the ExpirationModel or ValidTo values for the current import after the request completes. To change either value, you must reimport the key material.

Source

pub fn get_expiration_model(&self) -> &Option<ExpirationModelType>

Specifies whether the key material expires. The default is KEY_MATERIAL_EXPIRES. For help with this choice, see Setting an expiration time in the Key Management Service Developer Guide.

When the value of ExpirationModel is KEY_MATERIAL_EXPIRES, you must specify a value for the ValidTo parameter. When value is KEY_MATERIAL_DOES_NOT_EXPIRE, you must omit the ValidTo parameter.

You cannot change the ExpirationModel or ValidTo values for the current import after the request completes. To change either value, you must reimport the key material.

Source

pub fn import_type(self, input: ImportType) -> Self

Indicates whether the key material being imported is previously associated with this KMS key or not. This parameter is optional and only usable with symmetric encryption keys. If no key material has ever been imported into the KMS key, and this parameter is omitted, the parameter defaults to NEW_KEY_MATERIAL. After the first key material is imported, if this parameter is omitted then the parameter defaults to EXISTING_KEY_MATERIAL.

Source

pub fn set_import_type(self, input: Option<ImportType>) -> Self

Indicates whether the key material being imported is previously associated with this KMS key or not. This parameter is optional and only usable with symmetric encryption keys. If no key material has ever been imported into the KMS key, and this parameter is omitted, the parameter defaults to NEW_KEY_MATERIAL. After the first key material is imported, if this parameter is omitted then the parameter defaults to EXISTING_KEY_MATERIAL.

Source

pub fn get_import_type(&self) -> &Option<ImportType>

Indicates whether the key material being imported is previously associated with this KMS key or not. This parameter is optional and only usable with symmetric encryption keys. If no key material has ever been imported into the KMS key, and this parameter is omitted, the parameter defaults to NEW_KEY_MATERIAL. After the first key material is imported, if this parameter is omitted then the parameter defaults to EXISTING_KEY_MATERIAL.

Source

pub fn key_material_description(self, input: impl Into<String>) -> Self

Description for the key material being imported. This parameter is optional and only usable with symmetric encryption keys. If you do not specify a key material description, KMS retains the value you specified when you last imported the same key material into this KMS key.

Source

pub fn set_key_material_description(self, input: Option<String>) -> Self

Description for the key material being imported. This parameter is optional and only usable with symmetric encryption keys. If you do not specify a key material description, KMS retains the value you specified when you last imported the same key material into this KMS key.

Source

pub fn get_key_material_description(&self) -> &Option<String>

Description for the key material being imported. This parameter is optional and only usable with symmetric encryption keys. If you do not specify a key material description, KMS retains the value you specified when you last imported the same key material into this KMS key.

Source

pub fn key_material_id(self, input: impl Into<String>) -> Self

Identifies the key material being imported. This parameter is optional and only usable with symmetric encryption keys. You cannot specify a key material ID with ImportType set to NEW_KEY_MATERIAL. Whenever you import key material into a symmetric encryption key, KMS assigns a unique identifier to the key material based on the KMS key ID and the imported key material. When you re-import key material with a specified key material ID, KMS:

  • Computes the identifier for the key material

  • Matches the computed identifier against the specified key material ID

  • Verifies that the key material ID is already associated with the KMS key

To get the list of key material IDs associated with a KMS key, use ListKeyRotations.

Source

pub fn set_key_material_id(self, input: Option<String>) -> Self

Identifies the key material being imported. This parameter is optional and only usable with symmetric encryption keys. You cannot specify a key material ID with ImportType set to NEW_KEY_MATERIAL. Whenever you import key material into a symmetric encryption key, KMS assigns a unique identifier to the key material based on the KMS key ID and the imported key material. When you re-import key material with a specified key material ID, KMS:

  • Computes the identifier for the key material

  • Matches the computed identifier against the specified key material ID

  • Verifies that the key material ID is already associated with the KMS key

To get the list of key material IDs associated with a KMS key, use ListKeyRotations.

Source

pub fn get_key_material_id(&self) -> &Option<String>

Identifies the key material being imported. This parameter is optional and only usable with symmetric encryption keys. You cannot specify a key material ID with ImportType set to NEW_KEY_MATERIAL. Whenever you import key material into a symmetric encryption key, KMS assigns a unique identifier to the key material based on the KMS key ID and the imported key material. When you re-import key material with a specified key material ID, KMS:

  • Computes the identifier for the key material

  • Matches the computed identifier against the specified key material ID

  • Verifies that the key material ID is already associated with the KMS key

To get the list of key material IDs associated with a KMS key, use ListKeyRotations.

Trait Implementations§

Source§

impl Clone for ImportKeyMaterialFluentBuilder

Source§

fn clone(&self) -> ImportKeyMaterialFluentBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for ImportKeyMaterialFluentBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,