Struct aws_sdk_kms::client::fluent_builders::Decrypt

pub struct Decrypt { /* private fields */ }

Fluent builder constructing a request to Decrypt.

Decrypts ciphertext that was encrypted by a KMS key using any of the following operations:

• Encrypt

• GenerateDataKey

• GenerateDataKeyPair

• GenerateDataKeyWithoutPlaintext

• GenerateDataKeyPairWithoutPlaintext

You can use this operation to decrypt ciphertext that was encrypted under a symmetric encryption KMS key or an asymmetric encryption KMS key. When the KMS key is asymmetric, you must specify the KMS key and the encryption algorithm that was used to encrypt the ciphertext. For information about asymmetric KMS keys, see Asymmetric KMS keys in the Key Management Service Developer Guide.

The Decrypt operation also decrypts ciphertext that was encrypted outside of KMS by the public key in an KMS asymmetric KMS key. However, it cannot decrypt ciphertext produced by other libraries, such as the Amazon Web Services Encryption SDK or Amazon S3 client-side encryption. These libraries return a ciphertext format that is incompatible with KMS.

If the ciphertext was encrypted under a symmetric encryption KMS key, the KeyId parameter is optional. KMS can get this information from metadata that it adds to the symmetric ciphertext blob. This feature adds durability to your implementation by ensuring that authorized users can decrypt ciphertext decades after it was encrypted, even if they've lost track of the key ID. However, specifying the KMS key is always recommended as a best practice. When you use the KeyId parameter to specify a KMS key, KMS only uses the KMS key you specify. If the ciphertext was encrypted under a different KMS key, the Decrypt operation fails. This practice ensures that you use the KMS key that you intend.

Whenever possible, use key policies to give users permission to call the Decrypt operation on a particular KMS key, instead of using IAM policies. Otherwise, you might create an IAM user policy that gives the user Decrypt permission on all KMS keys. This user could decrypt ciphertext that was encrypted by KMS keys in other accounts if the key policy for the cross-account KMS key permits it. If you must use an IAM policy for Decrypt permissions, limit the user to particular KMS keys or particular trusted accounts. For details, see Best practices for IAM policies in the Key Management Service Developer Guide.

Applications in Amazon Web Services Nitro Enclaves can call this operation by using the Amazon Web Services Nitro Enclaves Development Kit. For information about the supporting parameters, see How Amazon Web Services Nitro Enclaves use KMS in the Key Management Service Developer Guide.

The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.

Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.

Required permissions: kms:Decrypt (key policy)

Related operations:

• Encrypt

• GenerateDataKey

• GenerateDataKeyPair

• ReEncrypt

Implementations

impl Decrypt

pub async fn customize(
    self
) -> Result<CustomizableOperation<Decrypt, AwsResponseRetryClassifier>, SdkError<DecryptError>>

Consume this builder, creating a customizable operation that can be modified before being sent. The operation’s inner http::Request can be modified as well.

pub async fn send(self) -> Result<DecryptOutput, SdkError<DecryptError>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn ciphertext_blob(self, input: Blob) -> Self

Ciphertext to be decrypted. The blob includes metadata.

pub fn set_ciphertext_blob(self, input: Option<Blob>) -> Self

Ciphertext to be decrypted. The blob includes metadata.

pub fn encryption_context(
    self,
    k: impl Into<String>,
    v: impl Into<String>
) -> Self

Adds a key-value pair to EncryptionContext.

To override the contents of this collection use set_encryption_context.

Specifies the encryption context to use when decrypting the data. An encryption context is valid only for cryptographic operations with a symmetric encryption KMS key. The standard asymmetric encryption algorithms and HMAC algorithms that KMS uses do not support an encryption context.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

pub fn set_encryption_context(
    self,
    input: Option<HashMap<String, String>>
) -> Self

Specifies the encryption context to use when decrypting the data. An encryption context is valid only for cryptographic operations with a symmetric encryption KMS key. The standard asymmetric encryption algorithms and HMAC algorithms that KMS uses do not support an encryption context.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

pub fn grant_tokens(self, input: impl Into<String>) -> Self

Appends an item to GrantTokens.

To override the contents of this collection use set_grant_tokens.

A list of grant tokens.

Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.

pub fn set_grant_tokens(self, input: Option<Vec<String>>) -> Self

A list of grant tokens.

Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.

pub fn key_id(self, input: impl Into<String>) -> Self

Specifies the KMS key that KMS uses to decrypt the ciphertext.

Enter a key ID of the KMS key that was used to encrypt the ciphertext. If you identify a different KMS key, the Decrypt operation throws an IncorrectKeyException.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key. If you used a symmetric encryption KMS key, KMS can get the KMS key from metadata that it adds to the symmetric ciphertext blob. However, it is always recommended as a best practice. This practice ensures that you use the KMS key that you intend.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

• Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

• Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

• Alias name: alias/ExampleAlias

• Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

pub fn set_key_id(self, input: Option<String>) -> Self

Specifies the KMS key that KMS uses to decrypt the ciphertext.

Enter a key ID of the KMS key that was used to encrypt the ciphertext. If you identify a different KMS key, the Decrypt operation throws an IncorrectKeyException.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key. If you used a symmetric encryption KMS key, KMS can get the KMS key from metadata that it adds to the symmetric ciphertext blob. However, it is always recommended as a best practice. This practice ensures that you use the KMS key that you intend.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

• Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

• Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

• Alias name: alias/ExampleAlias

• Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

pub fn encryption_algorithm(self, input: EncryptionAlgorithmSpec) -> Self

Specifies the encryption algorithm that will be used to decrypt the ciphertext. Specify the same algorithm that was used to encrypt the data. If you specify a different algorithm, the Decrypt operation fails.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key. The default value, SYMMETRIC_DEFAULT, represents the only supported algorithm that is valid for symmetric encryption KMS keys.

pub fn set_encryption_algorithm(
    self,
    input: Option<EncryptionAlgorithmSpec>
) -> Self

Specifies the encryption algorithm that will be used to decrypt the ciphertext. Specify the same algorithm that was used to encrypt the data. If you specify a different algorithm, the Decrypt operation fails.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key. The default value, SYMMETRIC_DEFAULT, represents the only supported algorithm that is valid for symmetric encryption KMS keys.

Trait Implementations

impl Clone for Decrypt

fn clone(&self) -> Decrypt

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Decrypt

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.