#[non_exhaustive]pub struct StartingPositionBuilder { /* private fields */ }
Expand description
A builder for StartingPosition
.
Implementations§
Source§impl StartingPositionBuilder
impl StartingPositionBuilder
Sourcepub fn type(self, input: ShardIteratorType) -> Self
pub fn type(self, input: ShardIteratorType) -> Self
You can set the starting position to one of the following values:
AT_SEQUENCE_NUMBER
: Start streaming from the position denoted by the sequence number specified in the SequenceNumber
field.
AFTER_SEQUENCE_NUMBER
: Start streaming right after the position denoted by the sequence number specified in the SequenceNumber
field.
AT_TIMESTAMP
: Start streaming from the position denoted by the time stamp specified in the Timestamp
field.
TRIM_HORIZON
: Start streaming at the last untrimmed record in the shard, which is the oldest data record in the shard.
LATEST
: Start streaming just after the most recent record in the shard, so that you always read the most recent data in the shard.
Sourcepub fn set_type(self, input: Option<ShardIteratorType>) -> Self
pub fn set_type(self, input: Option<ShardIteratorType>) -> Self
You can set the starting position to one of the following values:
AT_SEQUENCE_NUMBER
: Start streaming from the position denoted by the sequence number specified in the SequenceNumber
field.
AFTER_SEQUENCE_NUMBER
: Start streaming right after the position denoted by the sequence number specified in the SequenceNumber
field.
AT_TIMESTAMP
: Start streaming from the position denoted by the time stamp specified in the Timestamp
field.
TRIM_HORIZON
: Start streaming at the last untrimmed record in the shard, which is the oldest data record in the shard.
LATEST
: Start streaming just after the most recent record in the shard, so that you always read the most recent data in the shard.
Sourcepub fn get_type(&self) -> &Option<ShardIteratorType>
pub fn get_type(&self) -> &Option<ShardIteratorType>
You can set the starting position to one of the following values:
AT_SEQUENCE_NUMBER
: Start streaming from the position denoted by the sequence number specified in the SequenceNumber
field.
AFTER_SEQUENCE_NUMBER
: Start streaming right after the position denoted by the sequence number specified in the SequenceNumber
field.
AT_TIMESTAMP
: Start streaming from the position denoted by the time stamp specified in the Timestamp
field.
TRIM_HORIZON
: Start streaming at the last untrimmed record in the shard, which is the oldest data record in the shard.
LATEST
: Start streaming just after the most recent record in the shard, so that you always read the most recent data in the shard.
Sourcepub fn sequence_number(self, input: impl Into<String>) -> Self
pub fn sequence_number(self, input: impl Into<String>) -> Self
The sequence number of the data record in the shard from which to start streaming. To specify a sequence number, set StartingPosition
to AT_SEQUENCE_NUMBER
or AFTER_SEQUENCE_NUMBER
.
Sourcepub fn set_sequence_number(self, input: Option<String>) -> Self
pub fn set_sequence_number(self, input: Option<String>) -> Self
The sequence number of the data record in the shard from which to start streaming. To specify a sequence number, set StartingPosition
to AT_SEQUENCE_NUMBER
or AFTER_SEQUENCE_NUMBER
.
Sourcepub fn get_sequence_number(&self) -> &Option<String>
pub fn get_sequence_number(&self) -> &Option<String>
The sequence number of the data record in the shard from which to start streaming. To specify a sequence number, set StartingPosition
to AT_SEQUENCE_NUMBER
or AFTER_SEQUENCE_NUMBER
.
Sourcepub fn timestamp(self, input: DateTime) -> Self
pub fn timestamp(self, input: DateTime) -> Self
The time stamp of the data record from which to start reading. To specify a time stamp, set StartingPosition
to Type AT_TIMESTAMP
. A time stamp is the Unix epoch date with precision in milliseconds. For example, 2016-04-04T19:58:46.480-00:00
or 1459799926.480
. If a record with this exact time stamp does not exist, records will be streamed from the next (later) record. If the time stamp is older than the current trim horizon, records will be streamed from the oldest untrimmed data record (TRIM_HORIZON
).
Sourcepub fn set_timestamp(self, input: Option<DateTime>) -> Self
pub fn set_timestamp(self, input: Option<DateTime>) -> Self
The time stamp of the data record from which to start reading. To specify a time stamp, set StartingPosition
to Type AT_TIMESTAMP
. A time stamp is the Unix epoch date with precision in milliseconds. For example, 2016-04-04T19:58:46.480-00:00
or 1459799926.480
. If a record with this exact time stamp does not exist, records will be streamed from the next (later) record. If the time stamp is older than the current trim horizon, records will be streamed from the oldest untrimmed data record (TRIM_HORIZON
).
Sourcepub fn get_timestamp(&self) -> &Option<DateTime>
pub fn get_timestamp(&self) -> &Option<DateTime>
The time stamp of the data record from which to start reading. To specify a time stamp, set StartingPosition
to Type AT_TIMESTAMP
. A time stamp is the Unix epoch date with precision in milliseconds. For example, 2016-04-04T19:58:46.480-00:00
or 1459799926.480
. If a record with this exact time stamp does not exist, records will be streamed from the next (later) record. If the time stamp is older than the current trim horizon, records will be streamed from the oldest untrimmed data record (TRIM_HORIZON
).
Sourcepub fn build(self) -> Result<StartingPosition, BuildError>
pub fn build(self) -> Result<StartingPosition, BuildError>
Consumes the builder and constructs a StartingPosition
.
This method will fail if any of the following fields are not set:
Trait Implementations§
Source§impl Clone for StartingPositionBuilder
impl Clone for StartingPositionBuilder
Source§fn clone(&self) -> StartingPositionBuilder
fn clone(&self) -> StartingPositionBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for StartingPositionBuilder
impl Debug for StartingPositionBuilder
Source§impl Default for StartingPositionBuilder
impl Default for StartingPositionBuilder
Source§fn default() -> StartingPositionBuilder
fn default() -> StartingPositionBuilder
Source§impl PartialEq for StartingPositionBuilder
impl PartialEq for StartingPositionBuilder
impl StructuralPartialEq for StartingPositionBuilder
Auto Trait Implementations§
impl Freeze for StartingPositionBuilder
impl RefUnwindSafe for StartingPositionBuilder
impl Send for StartingPositionBuilder
impl Sync for StartingPositionBuilder
impl Unpin for StartingPositionBuilder
impl UnwindSafe for StartingPositionBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);