#[non_exhaustive]pub enum StartStreamEncryptionError {
AccessDeniedException(AccessDeniedException),
InvalidArgumentException(InvalidArgumentException),
KmsAccessDeniedException(KmsAccessDeniedException),
KmsDisabledException(KmsDisabledException),
KmsInvalidStateException(KmsInvalidStateException),
KmsNotFoundException(KmsNotFoundException),
KmsOptInRequired(KmsOptInRequired),
KmsThrottlingException(KmsThrottlingException),
LimitExceededException(LimitExceededException),
ResourceInUseException(ResourceInUseException),
ResourceNotFoundException(ResourceNotFoundException),
Unhandled(Unhandled),
}
Expand description
Error type for the StartStreamEncryptionError
operation.
Variants (Non-exhaustive)§
This enum is marked as non-exhaustive
AccessDeniedException(AccessDeniedException)
Specifies that you do not have the permissions required to perform this operation.
InvalidArgumentException(InvalidArgumentException)
A specified parameter exceeds its restrictions, is not supported, or can't be used. For more information, see the returned message.
KmsAccessDeniedException(KmsAccessDeniedException)
The ciphertext references a key that doesn't exist or that you don't have access to.
KmsDisabledException(KmsDisabledException)
The request was rejected because the specified customer master key (CMK) isn't enabled.
KmsInvalidStateException(KmsInvalidStateException)
The request was rejected because the state of the specified resource isn't valid for this request. For more information, see How Key State Affects Use of a Customer Master Key in the Amazon Web Services Key Management Service Developer Guide.
KmsNotFoundException(KmsNotFoundException)
The request was rejected because the specified entity or resource can't be found.
KmsOptInRequired(KmsOptInRequired)
The Amazon Web Services access key ID needs a subscription for the service.
KmsThrottlingException(KmsThrottlingException)
The request was denied due to request throttling. For more information about throttling, see Limits in the Amazon Web Services Key Management Service Developer Guide.
LimitExceededException(LimitExceededException)
The requested resource exceeds the maximum number allowed, or the number of concurrent stream requests exceeds the maximum number allowed.
ResourceInUseException(ResourceInUseException)
The resource is not available for this operation. For successful operation, the resource must be in the ACTIVE
state.
ResourceNotFoundException(ResourceNotFoundException)
The requested resource could not be found. The stream might not be specified correctly.
Unhandled(Unhandled)
Unhandled
directly is not forwards compatible. Instead, match using a variable wildcard pattern and check .code()
:
err if err.code() == Some("SpecificExceptionCode") => { /* handle the error */ }
See ProvideErrorMetadata
for what information is available for the error.An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).
Implementations§
Source§impl StartStreamEncryptionError
impl StartStreamEncryptionError
Sourcepub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self
pub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self
Creates the StartStreamEncryptionError::Unhandled
variant from any error type.
Sourcepub fn generic(err: ErrorMetadata) -> Self
pub fn generic(err: ErrorMetadata) -> Self
Creates the StartStreamEncryptionError::Unhandled
variant from an ErrorMetadata
.
Sourcepub fn meta(&self) -> &ErrorMetadata
pub fn meta(&self) -> &ErrorMetadata
Returns error metadata, which includes the error code, message, request ID, and potentially additional information.
Sourcepub fn is_access_denied_exception(&self) -> bool
pub fn is_access_denied_exception(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::AccessDeniedException
.
Sourcepub fn is_invalid_argument_exception(&self) -> bool
pub fn is_invalid_argument_exception(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::InvalidArgumentException
.
Sourcepub fn is_kms_access_denied_exception(&self) -> bool
pub fn is_kms_access_denied_exception(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::KmsAccessDeniedException
.
Sourcepub fn is_kms_disabled_exception(&self) -> bool
pub fn is_kms_disabled_exception(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::KmsDisabledException
.
Sourcepub fn is_kms_invalid_state_exception(&self) -> bool
pub fn is_kms_invalid_state_exception(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::KmsInvalidStateException
.
Sourcepub fn is_kms_not_found_exception(&self) -> bool
pub fn is_kms_not_found_exception(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::KmsNotFoundException
.
Sourcepub fn is_kms_opt_in_required(&self) -> bool
pub fn is_kms_opt_in_required(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::KmsOptInRequired
.
Sourcepub fn is_kms_throttling_exception(&self) -> bool
pub fn is_kms_throttling_exception(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::KmsThrottlingException
.
Sourcepub fn is_limit_exceeded_exception(&self) -> bool
pub fn is_limit_exceeded_exception(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::LimitExceededException
.
Sourcepub fn is_resource_in_use_exception(&self) -> bool
pub fn is_resource_in_use_exception(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::ResourceInUseException
.
Sourcepub fn is_resource_not_found_exception(&self) -> bool
pub fn is_resource_not_found_exception(&self) -> bool
Returns true
if the error kind is StartStreamEncryptionError::ResourceNotFoundException
.
Trait Implementations§
Source§impl CreateUnhandledError for StartStreamEncryptionError
impl CreateUnhandledError for StartStreamEncryptionError
Source§fn create_unhandled_error(
source: Box<dyn Error + Send + Sync + 'static>,
meta: Option<ErrorMetadata>,
) -> Self
fn create_unhandled_error( source: Box<dyn Error + Send + Sync + 'static>, meta: Option<ErrorMetadata>, ) -> Self
source
and error metadata.Source§impl Debug for StartStreamEncryptionError
impl Debug for StartStreamEncryptionError
Source§impl Display for StartStreamEncryptionError
impl Display for StartStreamEncryptionError
Source§impl Error for StartStreamEncryptionError
impl Error for StartStreamEncryptionError
Source§fn source(&self) -> Option<&(dyn Error + 'static)>
fn source(&self) -> Option<&(dyn Error + 'static)>
1.0.0 · Source§fn description(&self) -> &str
fn description(&self) -> &str
Source§impl From<StartStreamEncryptionError> for Error
impl From<StartStreamEncryptionError> for Error
Source§fn from(err: StartStreamEncryptionError) -> Self
fn from(err: StartStreamEncryptionError) -> Self
Source§impl ProvideErrorMetadata for StartStreamEncryptionError
impl ProvideErrorMetadata for StartStreamEncryptionError
Source§fn meta(&self) -> &ErrorMetadata
fn meta(&self) -> &ErrorMetadata
Source§impl RequestId for StartStreamEncryptionError
impl RequestId for StartStreamEncryptionError
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None
if the service could not be reached.Auto Trait Implementations§
impl Freeze for StartStreamEncryptionError
impl !RefUnwindSafe for StartStreamEncryptionError
impl Send for StartStreamEncryptionError
impl Sync for StartStreamEncryptionError
impl Unpin for StartStreamEncryptionError
impl !UnwindSafe for StartStreamEncryptionError
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);