aws_sdk_kinesis::operation::list_shards::builders

Struct ListShardsInputBuilder

#[non_exhaustive]
pub struct ListShardsInputBuilder { /* private fields */ }

Expand description

A builder for ListShardsInput.

Implementations§

Source §

impl ListShardsInputBuilder

Source

pub fn stream_name(self, input: impl Into<String>) -> Self

The name of the data stream whose shards you want to list.

You cannot specify this parameter if you specify the NextToken parameter.

Source

pub fn set_stream_name(self, input: Option<String>) -> Self

The name of the data stream whose shards you want to list.

You cannot specify this parameter if you specify the NextToken parameter.

Source

pub fn get_stream_name(&self) -> &Option<String>

The name of the data stream whose shards you want to list.

You cannot specify this parameter if you specify the NextToken parameter.

Source

pub fn next_token(self, input: impl Into<String>) -> Self

When the number of shards in the data stream is greater than the default value for the MaxResults parameter, or if you explicitly specify a value for MaxResults that is less than the number of shards in the data stream, the response includes a pagination token named NextToken. You can specify this NextToken value in a subsequent call to ListShards to list the next set of shards.

Don't specify StreamName or StreamCreationTimestamp if you specify NextToken because the latter unambiguously identifies the stream.

You can optionally specify a value for the MaxResults parameter when you specify NextToken. If you specify a MaxResults value that is less than the number of shards that the operation returns if you don't specify MaxResults, the response will contain a new NextToken value. You can use the new NextToken value in a subsequent call to the ListShards operation.

Tokens expire after 300 seconds. When you obtain a value for NextToken in the response to a call to ListShards, you have 300 seconds to use that value. If you specify an expired token in a call to ListShards, you get ExpiredNextTokenException.

Source

pub fn set_next_token(self, input: Option<String>) -> Self

When the number of shards in the data stream is greater than the default value for the MaxResults parameter, or if you explicitly specify a value for MaxResults that is less than the number of shards in the data stream, the response includes a pagination token named NextToken. You can specify this NextToken value in a subsequent call to ListShards to list the next set of shards.

Don't specify StreamName or StreamCreationTimestamp if you specify NextToken because the latter unambiguously identifies the stream.

You can optionally specify a value for the MaxResults parameter when you specify NextToken. If you specify a MaxResults value that is less than the number of shards that the operation returns if you don't specify MaxResults, the response will contain a new NextToken value. You can use the new NextToken value in a subsequent call to the ListShards operation.

Tokens expire after 300 seconds. When you obtain a value for NextToken in the response to a call to ListShards, you have 300 seconds to use that value. If you specify an expired token in a call to ListShards, you get ExpiredNextTokenException.

Source

pub fn get_next_token(&self) -> &Option<String>

When the number of shards in the data stream is greater than the default value for the MaxResults parameter, or if you explicitly specify a value for MaxResults that is less than the number of shards in the data stream, the response includes a pagination token named NextToken. You can specify this NextToken value in a subsequent call to ListShards to list the next set of shards.

Don't specify StreamName or StreamCreationTimestamp if you specify NextToken because the latter unambiguously identifies the stream.

You can optionally specify a value for the MaxResults parameter when you specify NextToken. If you specify a MaxResults value that is less than the number of shards that the operation returns if you don't specify MaxResults, the response will contain a new NextToken value. You can use the new NextToken value in a subsequent call to the ListShards operation.

Tokens expire after 300 seconds. When you obtain a value for NextToken in the response to a call to ListShards, you have 300 seconds to use that value. If you specify an expired token in a call to ListShards, you get ExpiredNextTokenException.

Source

pub fn exclusive_start_shard_id(self, input: impl Into<String>) -> Self

Specify this parameter to indicate that you want to list the shards starting with the shard whose ID immediately follows ExclusiveStartShardId.

If you don't specify this parameter, the default behavior is for ListShards to list the shards starting with the first one in the stream.

You cannot specify this parameter if you specify NextToken.

Source

pub fn set_exclusive_start_shard_id(self, input: Option<String>) -> Self

Specify this parameter to indicate that you want to list the shards starting with the shard whose ID immediately follows ExclusiveStartShardId.

If you don't specify this parameter, the default behavior is for ListShards to list the shards starting with the first one in the stream.

You cannot specify this parameter if you specify NextToken.

Source

pub fn get_exclusive_start_shard_id(&self) -> &Option<String>

Specify this parameter to indicate that you want to list the shards starting with the shard whose ID immediately follows ExclusiveStartShardId.

If you don't specify this parameter, the default behavior is for ListShards to list the shards starting with the first one in the stream.

You cannot specify this parameter if you specify NextToken.

Source

pub fn max_results(self, input: i32) -> Self

The maximum number of shards to return in a single call to ListShards. The maximum number of shards to return in a single call. The default value is 1000. If you specify a value greater than 1000, at most 1000 results are returned.

When the number of shards to be listed is greater than the value of MaxResults, the response contains a NextToken value that you can use in a subsequent call to ListShards to list the next set of shards.

Source

pub fn set_max_results(self, input: Option<i32>) -> Self

The maximum number of shards to return in a single call to ListShards. The maximum number of shards to return in a single call. The default value is 1000. If you specify a value greater than 1000, at most 1000 results are returned.

When the number of shards to be listed is greater than the value of MaxResults, the response contains a NextToken value that you can use in a subsequent call to ListShards to list the next set of shards.

Source

pub fn get_max_results(&self) -> &Option<i32>

The maximum number of shards to return in a single call to ListShards. The maximum number of shards to return in a single call. The default value is 1000. If you specify a value greater than 1000, at most 1000 results are returned.

When the number of shards to be listed is greater than the value of MaxResults, the response contains a NextToken value that you can use in a subsequent call to ListShards to list the next set of shards.

Source

pub fn stream_creation_timestamp(self, input: DateTime) -> Self

Specify this input parameter to distinguish data streams that have the same name. For example, if you create a data stream and then delete it, and you later create another data stream with the same name, you can use this input parameter to specify which of the two streams you want to list the shards for.

You cannot specify this parameter if you specify the NextToken parameter.

Source

pub fn set_stream_creation_timestamp(self, input: Option<DateTime>) -> Self

Specify this input parameter to distinguish data streams that have the same name. For example, if you create a data stream and then delete it, and you later create another data stream with the same name, you can use this input parameter to specify which of the two streams you want to list the shards for.

You cannot specify this parameter if you specify the NextToken parameter.

Source

pub fn get_stream_creation_timestamp(&self) -> &Option<DateTime>

Specify this input parameter to distinguish data streams that have the same name. For example, if you create a data stream and then delete it, and you later create another data stream with the same name, you can use this input parameter to specify which of the two streams you want to list the shards for.

You cannot specify this parameter if you specify the NextToken parameter.

Source

pub fn shard_filter(self, input: ShardFilter) -> Self

Enables you to filter out the response of the ListShards API. You can only specify one filter at a time.

If you use the ShardFilter parameter when invoking the ListShards API, the Type is the required property and must be specified. If you specify the AT_TRIM_HORIZON, FROM_TRIM_HORIZON, or AT_LATEST types, you do not need to specify either the ShardId or the Timestamp optional properties.

If you specify the AFTER_SHARD_ID type, you must also provide the value for the optional ShardId property. The ShardId property is identical in fuctionality to the ExclusiveStartShardId parameter of the ListShards API. When ShardId property is specified, the response includes the shards starting with the shard whose ID immediately follows the ShardId that you provided.

If you specify the AT_TIMESTAMP or FROM_TIMESTAMP_ID type, you must also provide the value for the optional Timestamp property. If you specify the AT_TIMESTAMP type, then all shards that were open at the provided timestamp are returned. If you specify the FROM_TIMESTAMP type, then all shards starting from the provided timestamp to TIP are returned.

Source

pub fn set_shard_filter(self, input: Option<ShardFilter>) -> Self

Enables you to filter out the response of the ListShards API. You can only specify one filter at a time.

If you use the ShardFilter parameter when invoking the ListShards API, the Type is the required property and must be specified. If you specify the AT_TRIM_HORIZON, FROM_TRIM_HORIZON, or AT_LATEST types, you do not need to specify either the ShardId or the Timestamp optional properties.

If you specify the AFTER_SHARD_ID type, you must also provide the value for the optional ShardId property. The ShardId property is identical in fuctionality to the ExclusiveStartShardId parameter of the ListShards API. When ShardId property is specified, the response includes the shards starting with the shard whose ID immediately follows the ShardId that you provided.

If you specify the AT_TIMESTAMP or FROM_TIMESTAMP_ID type, you must also provide the value for the optional Timestamp property. If you specify the AT_TIMESTAMP type, then all shards that were open at the provided timestamp are returned. If you specify the FROM_TIMESTAMP type, then all shards starting from the provided timestamp to TIP are returned.

Source

pub fn get_shard_filter(&self) -> &Option<ShardFilter>

Enables you to filter out the response of the ListShards API. You can only specify one filter at a time.

If you use the ShardFilter parameter when invoking the ListShards API, the Type is the required property and must be specified. If you specify the AT_TRIM_HORIZON, FROM_TRIM_HORIZON, or AT_LATEST types, you do not need to specify either the ShardId or the Timestamp optional properties.

If you specify the AFTER_SHARD_ID type, you must also provide the value for the optional ShardId property. The ShardId property is identical in fuctionality to the ExclusiveStartShardId parameter of the ListShards API. When ShardId property is specified, the response includes the shards starting with the shard whose ID immediately follows the ShardId that you provided.

If you specify the AT_TIMESTAMP or FROM_TIMESTAMP_ID type, you must also provide the value for the optional Timestamp property. If you specify the AT_TIMESTAMP type, then all shards that were open at the provided timestamp are returned. If you specify the FROM_TIMESTAMP type, then all shards starting from the provided timestamp to TIP are returned.

Source

pub fn stream_arn(self, input: impl Into<String>) -> Self

The ARN of the stream.

Source

pub fn set_stream_arn(self, input: Option<String>) -> Self

The ARN of the stream.

Source

pub fn get_stream_arn(&self) -> &Option<String>

The ARN of the stream.

Source

pub fn build(self) -> Result<ListShardsInput, BuildError>

Consumes the builder and constructs a ListShardsInput.

Source §

impl ListShardsInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<ListShardsOutput, SdkError<ListShardsError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source §

impl Clone for ListShardsInputBuilder

Source §

fn clone(&self) -> ListShardsInputBuilder

Returns a duplicate of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

Source §

impl Debug for ListShardsInputBuilder

Source §

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Source §

impl Default for ListShardsInputBuilder

Source §

fn default() -> ListShardsInputBuilder

Returns the “default value” for a type. Read more

Source §

impl PartialEq for ListShardsInputBuilder

Source §

fn eq(&self, other: &ListShardsInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

Source §

impl StructuralPartialEq for ListShardsInputBuilder

Auto Trait Implementations§

§

impl UnwindSafe for ListShardsInputBuilder

Blanket Implementations§

Source §

impl<T> Any for T
where T: 'static + ?Sized,

Source §

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

Source §

impl<T> Borrow<T> for T
where T: ?Sized,

Source §

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

Source §

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source §

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

Source §

impl<T> CloneToUninit for T
where T: Clone,

Source §

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

Source §

impl<T> From<T> for T

Source §

fn from(t: T) -> T

Returns the argument unchanged.

Source §

impl<T> Instrument for T

Source §

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Source §

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Source §

impl<T, U> Into for T
where U: From<T>,

Source §

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source §

impl<T> IntoEither for T

Source §

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

Source §

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source §

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

Source §

impl<T> Paint for T
where T: ?Sized,

Source §

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

Source §

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example

println!("{}", value.primary());

Source §

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example

println!("{}", value.fixed(color));

Source §

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example

println!("{}", value.rgb(r, g, b));

Source §

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example

println!("{}", value.black());

Source §

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example

println!("{}", value.red());

Source §

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example

println!("{}", value.green());

Source §

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example

println!("{}", value.yellow());

Source §

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example

println!("{}", value.blue());

Source §

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example

println!("{}", value.magenta());

Source §

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example

println!("{}", value.cyan());

Source §

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example

println!("{}", value.white());

Source §

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example

println!("{}", value.bright_black());

Source §

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example

println!("{}", value.bright_red());

Source §

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example

println!("{}", value.bright_green());

Source §

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example

println!("{}", value.bright_yellow());

Source §

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example

println!("{}", value.bright_blue());

Source §

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.bright_magenta());

Source §

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example

println!("{}", value.bright_cyan());

Source §

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example

println!("{}", value.bright_white());

Source §

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

Source §

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example

println!("{}", value.on_primary());

Source §

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example

println!("{}", value.on_fixed(color));

Source §

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example

println!("{}", value.on_rgb(r, g, b));

Source §

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example

println!("{}", value.on_black());

Source §

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example

println!("{}", value.on_red());

Source §

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example

println!("{}", value.on_green());

Source §

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example

println!("{}", value.on_yellow());

Source §

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example

println!("{}", value.on_blue());

Source §

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example

println!("{}", value.on_magenta());

Source §

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example

println!("{}", value.on_cyan());

Source §

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example

println!("{}", value.on_white());

Source §

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example

println!("{}", value.on_bright_black());

Source §

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example

println!("{}", value.on_bright_red());

Source §

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example

println!("{}", value.on_bright_green());

Source §

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example

println!("{}", value.on_bright_yellow());

Source §

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example

println!("{}", value.on_bright_blue());

Source §

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.on_bright_magenta());

Source §

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example

println!("{}", value.on_bright_cyan());

Source §

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example

println!("{}", value.on_bright_white());

Source §

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

Source §

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example

println!("{}", value.bold());

Source §

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example

println!("{}", value.dim());

Source §

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example

println!("{}", value.italic());

Source §

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example

println!("{}", value.underline());

Source §

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Blink].

§Example

println!("{}", value.blink());

Source §

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example

println!("{}", value.rapid_blink());

Source §

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example

println!("{}", value.invert());

Source §

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example

println!("{}", value.conceal());

Source §

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example

println!("{}", value.strike());

Source §

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

Source §

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example

println!("{}", value.mask());

Source §

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example

println!("{}", value.wrap());

Source §

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example

println!("{}", value.linger());

Source §

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example

println!("{}", value.clear());

Source §

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example

println!("{}", value.resetting());

Source §

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example

println!("{}", value.bright());

Source §

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example

println!("{}", value.on_bright());

Source §

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

Source §

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

Source §

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

Source §

impl<T> Same for T

Source §

type Output = T

Should always be Self

Source §

impl<T> ToOwned for T
where T: Clone,

Source §

type Owned = T

The resulting type after obtaining ownership.

Source §

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

Source §

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

Source §

impl<T, U> TryFrom for T
where U: Into<T>,

Source §

type Error = Infallible

The type returned in the event of a conversion error.

Source §

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

Source §

impl<T, U> TryInto for T
where U: TryFrom<T>,

Source §

type Error = >::Error

The type returned in the event of a conversion error.

Source §

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Source §

impl<T> WithSubscriber for T

Source §

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

Source §

ListShardsInputBuilder

Struct ListShardsInputBuilder Copy item path

Implementations§

impl ListShardsInputBuilder

pub fn stream_name(self, input: impl Into<String>) -> Self

pub fn set_stream_name(self, input: Option<String>) -> Self

pub fn get_stream_name(&self) -> &Option<String>

pub fn next_token(self, input: impl Into<String>) -> Self

pub fn set_next_token(self, input: Option<String>) -> Self

pub fn get_next_token(&self) -> &Option<String>

pub fn exclusive_start_shard_id(self, input: impl Into<String>) -> Self

pub fn set_exclusive_start_shard_id(self, input: Option<String>) -> Self

pub fn get_exclusive_start_shard_id(&self) -> &Option<String>

pub fn max_results(self, input: i32) -> Self

pub fn set_max_results(self, input: Option<i32>) -> Self

pub fn get_max_results(&self) -> &Option<i32>

pub fn stream_creation_timestamp(self, input: DateTime) -> Self

pub fn set_stream_creation_timestamp(self, input: Option<DateTime>) -> Self

pub fn get_stream_creation_timestamp(&self) -> &Option<DateTime>

pub fn shard_filter(self, input: ShardFilter) -> Self

pub fn set_shard_filter(self, input: Option<ShardFilter>) -> Self

pub fn get_shard_filter(&self) -> &Option<ShardFilter>

pub fn stream_arn(self, input: impl Into<String>) -> Self

pub fn set_stream_arn(self, input: Option<String>) -> Self

pub fn get_stream_arn(&self) -> &Option<String>

pub fn build(self) -> Result<ListShardsInput, BuildError>

impl ListShardsInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<ListShardsOutput, SdkError<ListShardsError, HttpResponse>>

Trait Implementations§

impl Clone for ListShardsInputBuilder

fn clone(&self) -> ListShardsInputBuilder

fn clone_from(&mut self, source: &Self)

impl Debug for ListShardsInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl Default for ListShardsInputBuilder

fn default() -> ListShardsInputBuilder

impl PartialEq for ListShardsInputBuilder

fn eq(&self, other: &ListShardsInputBuilder) -> bool

fn ne(&self, other: &Rhs) -> bool

impl StructuralPartialEq for ListShardsInputBuilder

Auto Trait Implementations§

impl Freeze for ListShardsInputBuilder

impl RefUnwindSafe for ListShardsInputBuilder

impl Send for ListShardsInputBuilder

impl Sync for ListShardsInputBuilder

impl Unpin for ListShardsInputBuilder

impl UnwindSafe for ListShardsInputBuilder

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> CloneToUninit for Twhere T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

impl<T> From<T> for T

fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unsharedwhere Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

impl<T> Paint for Twhere T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

§Example

fn primary(&self) -> Painted<&T>

§Example

fn fixed(&self, color: u8) -> Painted<&T>

§Example

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

§Example

fn black(&self) -> Painted<&T>

§Example

fn red(&self) -> Painted<&T>

Struct ListShardsInputBuilder

impl<T> Any for T
where T: 'static + ?Sized,

impl<T> Borrow<T> for T
where T: ?Sized,

impl<T> BorrowMut<T> for T
where T: ?Sized,

impl<T> CloneToUninit for T
where T: Clone,

impl<T, U> Into<U> for T
where U: From<T>,

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

impl<T> Paint for T
where T: ?Sized,