pub struct GetRecordsFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to GetRecords.
Retrieves data records from a specified shard in an Amazon Keyspaces data stream. This operation returns a collection of data records from the shard, including the primary key columns and information about modifications made to the captured table data. Each record represents a single data modification in the Amazon Keyspaces table and includes metadata about when the change occurred.
Implementations§
Source§impl GetRecordsFluentBuilder
impl GetRecordsFluentBuilder
Sourcepub fn as_input(&self) -> &GetRecordsInputBuilder
pub fn as_input(&self) -> &GetRecordsInputBuilder
Access the GetRecords as a reference.
Sourcepub async fn send(
self,
) -> Result<GetRecordsOutput, SdkError<GetRecordsError, HttpResponse>>
pub async fn send( self, ) -> Result<GetRecordsOutput, SdkError<GetRecordsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<GetRecordsOutput, GetRecordsError, Self>
pub fn customize( self, ) -> CustomizableOperation<GetRecordsOutput, GetRecordsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn shard_iterator(self, input: impl Into<String>) -> Self
pub fn shard_iterator(self, input: impl Into<String>) -> Self
The unique identifier of the shard iterator. A shard iterator specifies the position in the shard from which you want to start reading data records sequentially. You obtain this value by calling the GetShardIterator operation. Each shard iterator is valid for 5 minutes after creation.
Sourcepub fn set_shard_iterator(self, input: Option<String>) -> Self
pub fn set_shard_iterator(self, input: Option<String>) -> Self
The unique identifier of the shard iterator. A shard iterator specifies the position in the shard from which you want to start reading data records sequentially. You obtain this value by calling the GetShardIterator operation. Each shard iterator is valid for 5 minutes after creation.
Sourcepub fn get_shard_iterator(&self) -> &Option<String>
pub fn get_shard_iterator(&self) -> &Option<String>
The unique identifier of the shard iterator. A shard iterator specifies the position in the shard from which you want to start reading data records sequentially. You obtain this value by calling the GetShardIterator operation. Each shard iterator is valid for 5 minutes after creation.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of records to return in a single GetRecords request. Default value is 1000. You can specify a limit between 1 and 10000, but the actual number returned might be less than the specified maximum if the size of the data for the returned records exceeds the internal size limit.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of records to return in a single GetRecords request. Default value is 1000. You can specify a limit between 1 and 10000, but the actual number returned might be less than the specified maximum if the size of the data for the returned records exceeds the internal size limit.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of records to return in a single GetRecords request. Default value is 1000. You can specify a limit between 1 and 10000, but the actual number returned might be less than the specified maximum if the size of the data for the returned records exceeds the internal size limit.
Trait Implementations§
Source§impl Clone for GetRecordsFluentBuilder
impl Clone for GetRecordsFluentBuilder
Source§fn clone(&self) -> GetRecordsFluentBuilder
fn clone(&self) -> GetRecordsFluentBuilder
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for GetRecordsFluentBuilder
impl !RefUnwindSafe for GetRecordsFluentBuilder
impl Send for GetRecordsFluentBuilder
impl Sync for GetRecordsFluentBuilder
impl Unpin for GetRecordsFluentBuilder
impl !UnwindSafe for GetRecordsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);