#[non_exhaustive]pub struct UpdateTableInput {
pub keyspace_name: Option<String>,
pub table_name: Option<String>,
pub add_columns: Option<Vec<ColumnDefinition>>,
pub capacity_specification: Option<CapacitySpecification>,
pub encryption_specification: Option<EncryptionSpecification>,
pub point_in_time_recovery: Option<PointInTimeRecovery>,
pub ttl: Option<TimeToLive>,
pub default_time_to_live: Option<i32>,
pub client_side_timestamps: Option<ClientSideTimestamps>,
pub auto_scaling_specification: Option<AutoScalingSpecification>,
pub replica_specifications: Option<Vec<ReplicaSpecification>>,
pub cdc_specification: Option<CdcSpecification>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.keyspace_name: Option<String>The name of the keyspace the specified table is stored in.
table_name: Option<String>The name of the table.
add_columns: Option<Vec<ColumnDefinition>>For each column to be added to the specified table:
-
name- The name of the column. -
type- An Amazon Keyspaces data type. For more information, see Data types in the Amazon Keyspaces Developer Guide.
capacity_specification: Option<CapacitySpecification>Modifies the read/write throughput capacity mode for the table. The options are:
-
throughputMode:PAY_PER_REQUESTand -
throughputMode:PROVISIONED- Provisioned capacity mode requiresreadCapacityUnitsandwriteCapacityUnitsas input.
The default is throughput_mode:PAY_PER_REQUEST.
For more information, see Read/write capacity modes in the Amazon Keyspaces Developer Guide.
encryption_specification: Option<EncryptionSpecification>Modifies the encryption settings of the table. You can choose one of the following KMS key (KMS key):
-
type:AWS_OWNED_KMS_KEY- This key is owned by Amazon Keyspaces. -
type:CUSTOMER_MANAGED_KMS_KEY- This key is stored in your account and is created, owned, and managed by you. This option requires thekms_key_identifierof the KMS key in Amazon Resource Name (ARN) format as input.
The default is AWS_OWNED_KMS_KEY.
For more information, see Encryption at rest in the Amazon Keyspaces Developer Guide.
point_in_time_recovery: Option<PointInTimeRecovery>Modifies the pointInTimeRecovery settings of the table. The options are:
-
status=ENABLED -
status=DISABLED
If it's not specified, the default is status=DISABLED.
For more information, see Point-in-time recovery in the Amazon Keyspaces Developer Guide.
ttl: Option<TimeToLive>Modifies Time to Live custom settings for the table. The options are:
-
status:enabled -
status:disabled
The default is status:disabled. After ttl is enabled, you can't disable it for the table.
For more information, see Expiring data by using Amazon Keyspaces Time to Live (TTL) in the Amazon Keyspaces Developer Guide.
default_time_to_live: Option<i32>The default Time to Live setting in seconds for the table.
For more information, see Setting the default TTL value for a table in the Amazon Keyspaces Developer Guide.
client_side_timestamps: Option<ClientSideTimestamps>Enables client-side timestamps for the table. By default, the setting is disabled. You can enable client-side timestamps with the following option:
-
status: "enabled"
Once client-side timestamps are enabled for a table, this setting cannot be disabled.
auto_scaling_specification: Option<AutoScalingSpecification>The optional auto scaling settings to update for a table in provisioned capacity mode. Specifies if the service can manage throughput capacity of a provisioned table automatically on your behalf. Amazon Keyspaces auto scaling helps you provision throughput capacity for variable workloads efficiently by increasing and decreasing your table's read and write capacity automatically in response to application traffic.
If auto scaling is already enabled for the table, you can use UpdateTable to update the minimum and maximum values or the auto scaling policy settings independently.
For more information, see Managing throughput capacity automatically with Amazon Keyspaces auto scaling in the Amazon Keyspaces Developer Guide.
replica_specifications: Option<Vec<ReplicaSpecification>>The Region specific settings of a multi-Regional table.
cdc_specification: Option<CdcSpecification>The CDC stream settings of the table.
Implementations§
Source§impl UpdateTableInput
impl UpdateTableInput
Sourcepub fn keyspace_name(&self) -> Option<&str>
pub fn keyspace_name(&self) -> Option<&str>
The name of the keyspace the specified table is stored in.
Sourcepub fn table_name(&self) -> Option<&str>
pub fn table_name(&self) -> Option<&str>
The name of the table.
Sourcepub fn add_columns(&self) -> &[ColumnDefinition]
pub fn add_columns(&self) -> &[ColumnDefinition]
For each column to be added to the specified table:
-
name- The name of the column. -
type- An Amazon Keyspaces data type. For more information, see Data types in the Amazon Keyspaces Developer Guide.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .add_columns.is_none().
Sourcepub fn capacity_specification(&self) -> Option<&CapacitySpecification>
pub fn capacity_specification(&self) -> Option<&CapacitySpecification>
Modifies the read/write throughput capacity mode for the table. The options are:
-
throughputMode:PAY_PER_REQUESTand -
throughputMode:PROVISIONED- Provisioned capacity mode requiresreadCapacityUnitsandwriteCapacityUnitsas input.
The default is throughput_mode:PAY_PER_REQUEST.
For more information, see Read/write capacity modes in the Amazon Keyspaces Developer Guide.
Sourcepub fn encryption_specification(&self) -> Option<&EncryptionSpecification>
pub fn encryption_specification(&self) -> Option<&EncryptionSpecification>
Modifies the encryption settings of the table. You can choose one of the following KMS key (KMS key):
-
type:AWS_OWNED_KMS_KEY- This key is owned by Amazon Keyspaces. -
type:CUSTOMER_MANAGED_KMS_KEY- This key is stored in your account and is created, owned, and managed by you. This option requires thekms_key_identifierof the KMS key in Amazon Resource Name (ARN) format as input.
The default is AWS_OWNED_KMS_KEY.
For more information, see Encryption at rest in the Amazon Keyspaces Developer Guide.
Sourcepub fn point_in_time_recovery(&self) -> Option<&PointInTimeRecovery>
pub fn point_in_time_recovery(&self) -> Option<&PointInTimeRecovery>
Modifies the pointInTimeRecovery settings of the table. The options are:
-
status=ENABLED -
status=DISABLED
If it's not specified, the default is status=DISABLED.
For more information, see Point-in-time recovery in the Amazon Keyspaces Developer Guide.
Sourcepub fn ttl(&self) -> Option<&TimeToLive>
pub fn ttl(&self) -> Option<&TimeToLive>
Modifies Time to Live custom settings for the table. The options are:
-
status:enabled -
status:disabled
The default is status:disabled. After ttl is enabled, you can't disable it for the table.
For more information, see Expiring data by using Amazon Keyspaces Time to Live (TTL) in the Amazon Keyspaces Developer Guide.
Sourcepub fn default_time_to_live(&self) -> Option<i32>
pub fn default_time_to_live(&self) -> Option<i32>
The default Time to Live setting in seconds for the table.
For more information, see Setting the default TTL value for a table in the Amazon Keyspaces Developer Guide.
Sourcepub fn client_side_timestamps(&self) -> Option<&ClientSideTimestamps>
pub fn client_side_timestamps(&self) -> Option<&ClientSideTimestamps>
Enables client-side timestamps for the table. By default, the setting is disabled. You can enable client-side timestamps with the following option:
-
status: "enabled"
Once client-side timestamps are enabled for a table, this setting cannot be disabled.
Sourcepub fn auto_scaling_specification(&self) -> Option<&AutoScalingSpecification>
pub fn auto_scaling_specification(&self) -> Option<&AutoScalingSpecification>
The optional auto scaling settings to update for a table in provisioned capacity mode. Specifies if the service can manage throughput capacity of a provisioned table automatically on your behalf. Amazon Keyspaces auto scaling helps you provision throughput capacity for variable workloads efficiently by increasing and decreasing your table's read and write capacity automatically in response to application traffic.
If auto scaling is already enabled for the table, you can use UpdateTable to update the minimum and maximum values or the auto scaling policy settings independently.
For more information, see Managing throughput capacity automatically with Amazon Keyspaces auto scaling in the Amazon Keyspaces Developer Guide.
Sourcepub fn replica_specifications(&self) -> &[ReplicaSpecification]
pub fn replica_specifications(&self) -> &[ReplicaSpecification]
The Region specific settings of a multi-Regional table.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .replica_specifications.is_none().
Sourcepub fn cdc_specification(&self) -> Option<&CdcSpecification>
pub fn cdc_specification(&self) -> Option<&CdcSpecification>
The CDC stream settings of the table.
Source§impl UpdateTableInput
impl UpdateTableInput
Sourcepub fn builder() -> UpdateTableInputBuilder
pub fn builder() -> UpdateTableInputBuilder
Creates a new builder-style object to manufacture UpdateTableInput.
Trait Implementations§
Source§impl Clone for UpdateTableInput
impl Clone for UpdateTableInput
Source§fn clone(&self) -> UpdateTableInput
fn clone(&self) -> UpdateTableInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for UpdateTableInput
impl Debug for UpdateTableInput
Source§impl PartialEq for UpdateTableInput
impl PartialEq for UpdateTableInput
impl StructuralPartialEq for UpdateTableInput
Auto Trait Implementations§
impl Freeze for UpdateTableInput
impl RefUnwindSafe for UpdateTableInput
impl Send for UpdateTableInput
impl Sync for UpdateTableInput
impl Unpin for UpdateTableInput
impl UnwindSafe for UpdateTableInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);