CreateTableInputBuilder

aws_sdk_keyspaces::operation::create_table::builders

Struct CreateTableInputBuilder 

Source 
#[non_exhaustive]
pub struct CreateTableInputBuilder { /* private fields */ }
Expand description

A builder for CreateTableInput.

Implementations§

Source§

impl CreateTableInputBuilder

Source

pub fn keyspace_name(self, input: impl Into<String>) -> Self

The name of the keyspace that the table is going to be created in.

This field is required.
Source

pub fn set_keyspace_name(self, input: Option<String>) -> Self

The name of the keyspace that the table is going to be created in.

Source

pub fn get_keyspace_name(&self) -> &Option<String>

The name of the keyspace that the table is going to be created in.

Source

pub fn table_name(self, input: impl Into<String>) -> Self

The name of the table.

This field is required.
Source

pub fn set_table_name(self, input: Option<String>) -> Self

The name of the table.

Source

pub fn get_table_name(&self) -> &Option<String>

The name of the table.

Source

pub fn schema_definition(self, input: SchemaDefinition) -> Self

The schemaDefinition consists of the following parameters.

For each column to be created:

  • name - The name of the column.

  • type - An Amazon Keyspaces data type. For more information, see Data types in the Amazon Keyspaces Developer Guide.

The primary key of the table consists of the following columns:

  • partitionKeys - The partition key can be a single column, or it can be a compound value composed of two or more columns. The partition key portion of the primary key is required and determines how Amazon Keyspaces stores your data.

  • name - The name of each partition key column.

  • clusteringKeys - The optional clustering column portion of your primary key determines how the data is clustered and sorted within each partition.

  • name - The name of the clustering column.

  • orderBy - Sets the ascendant (ASC) or descendant (DESC) order modifier.

    To define a column as static use staticColumns - Static columns store values that are shared by all rows in the same partition:

  • name - The name of the column.

  • type - An Amazon Keyspaces data type.

This field is required.
Source

pub fn set_schema_definition(self, input: Option<SchemaDefinition>) -> Self

The schemaDefinition consists of the following parameters.

For each column to be created:

  • name - The name of the column.

  • type - An Amazon Keyspaces data type. For more information, see Data types in the Amazon Keyspaces Developer Guide.

The primary key of the table consists of the following columns:

  • partitionKeys - The partition key can be a single column, or it can be a compound value composed of two or more columns. The partition key portion of the primary key is required and determines how Amazon Keyspaces stores your data.

  • name - The name of each partition key column.

  • clusteringKeys - The optional clustering column portion of your primary key determines how the data is clustered and sorted within each partition.

  • name - The name of the clustering column.

  • orderBy - Sets the ascendant (ASC) or descendant (DESC) order modifier.

    To define a column as static use staticColumns - Static columns store values that are shared by all rows in the same partition:

  • name - The name of the column.

  • type - An Amazon Keyspaces data type.

Source

pub fn get_schema_definition(&self) -> &Option<SchemaDefinition>

The schemaDefinition consists of the following parameters.

For each column to be created:

  • name - The name of the column.

  • type - An Amazon Keyspaces data type. For more information, see Data types in the Amazon Keyspaces Developer Guide.

The primary key of the table consists of the following columns:

  • partitionKeys - The partition key can be a single column, or it can be a compound value composed of two or more columns. The partition key portion of the primary key is required and determines how Amazon Keyspaces stores your data.

  • name - The name of each partition key column.

  • clusteringKeys - The optional clustering column portion of your primary key determines how the data is clustered and sorted within each partition.

  • name - The name of the clustering column.

  • orderBy - Sets the ascendant (ASC) or descendant (DESC) order modifier.

    To define a column as static use staticColumns - Static columns store values that are shared by all rows in the same partition:

  • name - The name of the column.

  • type - An Amazon Keyspaces data type.

Source

pub fn comment(self, input: Comment) -> Self

This parameter allows to enter a description of the table.

Source

pub fn set_comment(self, input: Option<Comment>) -> Self

This parameter allows to enter a description of the table.

Source

pub fn get_comment(&self) -> &Option<Comment>

This parameter allows to enter a description of the table.

Source

pub fn capacity_specification(self, input: CapacitySpecification) -> Self

Specifies the read/write throughput capacity mode for the table. The options are:

  • throughputMode:PAY_PER_REQUEST and

  • throughputMode:PROVISIONED - Provisioned capacity mode requires readCapacityUnits and writeCapacityUnits as input.

The default is throughput_mode:PAY_PER_REQUEST.

For more information, see Read/write capacity modes in the Amazon Keyspaces Developer Guide.

Source

pub fn set_capacity_specification( self, input: Option<CapacitySpecification>, ) -> Self

Specifies the read/write throughput capacity mode for the table. The options are:

  • throughputMode:PAY_PER_REQUEST and

  • throughputMode:PROVISIONED - Provisioned capacity mode requires readCapacityUnits and writeCapacityUnits as input.

The default is throughput_mode:PAY_PER_REQUEST.

For more information, see Read/write capacity modes in the Amazon Keyspaces Developer Guide.

Source

pub fn get_capacity_specification(&self) -> &Option<CapacitySpecification>

Specifies the read/write throughput capacity mode for the table. The options are:

  • throughputMode:PAY_PER_REQUEST and

  • throughputMode:PROVISIONED - Provisioned capacity mode requires readCapacityUnits and writeCapacityUnits as input.

The default is throughput_mode:PAY_PER_REQUEST.

For more information, see Read/write capacity modes in the Amazon Keyspaces Developer Guide.

Source

pub fn encryption_specification(self, input: EncryptionSpecification) -> Self

Specifies how the encryption key for encryption at rest is managed for the table. You can choose one of the following KMS key (KMS key):

  • type:AWS_OWNED_KMS_KEY - This key is owned by Amazon Keyspaces.

  • type:CUSTOMER_MANAGED_KMS_KEY - This key is stored in your account and is created, owned, and managed by you. This option requires the kms_key_identifier of the KMS key in Amazon Resource Name (ARN) format as input.

The default is type:AWS_OWNED_KMS_KEY.

For more information, see Encryption at rest in the Amazon Keyspaces Developer Guide.

Source

pub fn set_encryption_specification( self, input: Option<EncryptionSpecification>, ) -> Self

Specifies how the encryption key for encryption at rest is managed for the table. You can choose one of the following KMS key (KMS key):

  • type:AWS_OWNED_KMS_KEY - This key is owned by Amazon Keyspaces.

  • type:CUSTOMER_MANAGED_KMS_KEY - This key is stored in your account and is created, owned, and managed by you. This option requires the kms_key_identifier of the KMS key in Amazon Resource Name (ARN) format as input.

The default is type:AWS_OWNED_KMS_KEY.

For more information, see Encryption at rest in the Amazon Keyspaces Developer Guide.

Source

pub fn get_encryption_specification(&self) -> &Option<EncryptionSpecification>

Specifies how the encryption key for encryption at rest is managed for the table. You can choose one of the following KMS key (KMS key):

  • type:AWS_OWNED_KMS_KEY - This key is owned by Amazon Keyspaces.

  • type:CUSTOMER_MANAGED_KMS_KEY - This key is stored in your account and is created, owned, and managed by you. This option requires the kms_key_identifier of the KMS key in Amazon Resource Name (ARN) format as input.

The default is type:AWS_OWNED_KMS_KEY.

For more information, see Encryption at rest in the Amazon Keyspaces Developer Guide.

Source

pub fn point_in_time_recovery(self, input: PointInTimeRecovery) -> Self

Specifies if pointInTimeRecovery is enabled or disabled for the table. The options are:

  • status=ENABLED

  • status=DISABLED

If it's not specified, the default is status=DISABLED.

For more information, see Point-in-time recovery in the Amazon Keyspaces Developer Guide.

Source

pub fn set_point_in_time_recovery( self, input: Option<PointInTimeRecovery>, ) -> Self

Specifies if pointInTimeRecovery is enabled or disabled for the table. The options are:

  • status=ENABLED

  • status=DISABLED

If it's not specified, the default is status=DISABLED.

For more information, see Point-in-time recovery in the Amazon Keyspaces Developer Guide.

Source

pub fn get_point_in_time_recovery(&self) -> &Option<PointInTimeRecovery>

Specifies if pointInTimeRecovery is enabled or disabled for the table. The options are:

  • status=ENABLED

  • status=DISABLED

If it's not specified, the default is status=DISABLED.

For more information, see Point-in-time recovery in the Amazon Keyspaces Developer Guide.

Source

pub fn ttl(self, input: TimeToLive) -> Self

Enables Time to Live custom settings for the table. The options are:

  • status:enabled

  • status:disabled

The default is status:disabled. After ttl is enabled, you can't disable it for the table.

For more information, see Expiring data by using Amazon Keyspaces Time to Live (TTL) in the Amazon Keyspaces Developer Guide.

Source

pub fn set_ttl(self, input: Option<TimeToLive>) -> Self

Enables Time to Live custom settings for the table. The options are:

  • status:enabled

  • status:disabled

The default is status:disabled. After ttl is enabled, you can't disable it for the table.

For more information, see Expiring data by using Amazon Keyspaces Time to Live (TTL) in the Amazon Keyspaces Developer Guide.

Source

pub fn get_ttl(&self) -> &Option<TimeToLive>

Enables Time to Live custom settings for the table. The options are:

  • status:enabled

  • status:disabled

The default is status:disabled. After ttl is enabled, you can't disable it for the table.

For more information, see Expiring data by using Amazon Keyspaces Time to Live (TTL) in the Amazon Keyspaces Developer Guide.

Source

pub fn default_time_to_live(self, input: i32) -> Self

The default Time to Live setting in seconds for the table.

For more information, see Setting the default TTL value for a table in the Amazon Keyspaces Developer Guide.

Source

pub fn set_default_time_to_live(self, input: Option<i32>) -> Self

The default Time to Live setting in seconds for the table.

For more information, see Setting the default TTL value for a table in the Amazon Keyspaces Developer Guide.

Source

pub fn get_default_time_to_live(&self) -> &Option<i32>

The default Time to Live setting in seconds for the table.

For more information, see Setting the default TTL value for a table in the Amazon Keyspaces Developer Guide.

Source

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

A list of key-value pair tags to be attached to the resource.

For more information, see Adding tags and labels to Amazon Keyspaces resources in the Amazon Keyspaces Developer Guide.

Source

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

A list of key-value pair tags to be attached to the resource.

For more information, see Adding tags and labels to Amazon Keyspaces resources in the Amazon Keyspaces Developer Guide.

Source

pub fn get_tags(&self) -> &Option<Vec<Tag>>

A list of key-value pair tags to be attached to the resource.

For more information, see Adding tags and labels to Amazon Keyspaces resources in the Amazon Keyspaces Developer Guide.

Source

pub fn client_side_timestamps(self, input: ClientSideTimestamps) -> Self

Enables client-side timestamps for the table. By default, the setting is disabled. You can enable client-side timestamps with the following option:

  • status: "enabled"

Once client-side timestamps are enabled for a table, this setting cannot be disabled.

Source

pub fn set_client_side_timestamps( self, input: Option<ClientSideTimestamps>, ) -> Self

Enables client-side timestamps for the table. By default, the setting is disabled. You can enable client-side timestamps with the following option:

  • status: "enabled"

Once client-side timestamps are enabled for a table, this setting cannot be disabled.

Source

pub fn get_client_side_timestamps(&self) -> &Option<ClientSideTimestamps>

Enables client-side timestamps for the table. By default, the setting is disabled. You can enable client-side timestamps with the following option:

  • status: "enabled"

Once client-side timestamps are enabled for a table, this setting cannot be disabled.

Source

pub fn auto_scaling_specification(self, input: AutoScalingSpecification) -> Self

The optional auto scaling settings for a table in provisioned capacity mode. Specifies if the service can manage throughput capacity automatically on your behalf.

Auto scaling helps you provision throughput capacity for variable workloads efficiently by increasing and decreasing your table's read and write capacity automatically in response to application traffic. For more information, see Managing throughput capacity automatically with Amazon Keyspaces auto scaling in the Amazon Keyspaces Developer Guide.

By default, auto scaling is disabled for a table.

Source

pub fn set_auto_scaling_specification( self, input: Option<AutoScalingSpecification>, ) -> Self

The optional auto scaling settings for a table in provisioned capacity mode. Specifies if the service can manage throughput capacity automatically on your behalf.

Auto scaling helps you provision throughput capacity for variable workloads efficiently by increasing and decreasing your table's read and write capacity automatically in response to application traffic. For more information, see Managing throughput capacity automatically with Amazon Keyspaces auto scaling in the Amazon Keyspaces Developer Guide.

By default, auto scaling is disabled for a table.

Source

pub fn get_auto_scaling_specification( &self, ) -> &Option<AutoScalingSpecification>

The optional auto scaling settings for a table in provisioned capacity mode. Specifies if the service can manage throughput capacity automatically on your behalf.

Auto scaling helps you provision throughput capacity for variable workloads efficiently by increasing and decreasing your table's read and write capacity automatically in response to application traffic. For more information, see Managing throughput capacity automatically with Amazon Keyspaces auto scaling in the Amazon Keyspaces Developer Guide.

By default, auto scaling is disabled for a table.

Source

pub fn replica_specifications(self, input: ReplicaSpecification) -> Self

Appends an item to replica_specifications.

To override the contents of this collection use set_replica_specifications.

The optional Amazon Web Services Region specific settings of a multi-Region table. These settings overwrite the general settings of the table for the specified Region.

For a multi-Region table in provisioned capacity mode, you can configure the table's read capacity differently for each Region's replica. The write capacity, however, remains synchronized between all replicas to ensure that there's enough capacity to replicate writes across all Regions. To define the read capacity for a table replica in a specific Region, you can do so by configuring the following parameters.

  • region: The Region where these settings are applied. (Required)

  • readCapacityUnits: The provisioned read capacity units. (Optional)

  • readCapacityAutoScaling: The read capacity auto scaling settings for the table. (Optional)

Source

pub fn set_replica_specifications( self, input: Option<Vec<ReplicaSpecification>>, ) -> Self

The optional Amazon Web Services Region specific settings of a multi-Region table. These settings overwrite the general settings of the table for the specified Region.

For a multi-Region table in provisioned capacity mode, you can configure the table's read capacity differently for each Region's replica. The write capacity, however, remains synchronized between all replicas to ensure that there's enough capacity to replicate writes across all Regions. To define the read capacity for a table replica in a specific Region, you can do so by configuring the following parameters.

  • region: The Region where these settings are applied. (Required)

  • readCapacityUnits: The provisioned read capacity units. (Optional)

  • readCapacityAutoScaling: The read capacity auto scaling settings for the table. (Optional)

Source

pub fn get_replica_specifications(&self) -> &Option<Vec<ReplicaSpecification>>

The optional Amazon Web Services Region specific settings of a multi-Region table. These settings overwrite the general settings of the table for the specified Region.

For a multi-Region table in provisioned capacity mode, you can configure the table's read capacity differently for each Region's replica. The write capacity, however, remains synchronized between all replicas to ensure that there's enough capacity to replicate writes across all Regions. To define the read capacity for a table replica in a specific Region, you can do so by configuring the following parameters.

  • region: The Region where these settings are applied. (Required)

  • readCapacityUnits: The provisioned read capacity units. (Optional)

  • readCapacityAutoScaling: The read capacity auto scaling settings for the table. (Optional)

Source

pub fn cdc_specification(self, input: CdcSpecification) -> Self

The CDC stream settings of the table.

Source

pub fn set_cdc_specification(self, input: Option<CdcSpecification>) -> Self

The CDC stream settings of the table.

Source

pub fn get_cdc_specification(&self) -> &Option<CdcSpecification>

The CDC stream settings of the table.

Source

pub fn build(self) -> Result<CreateTableInput, BuildError>

Consumes the builder and constructs a CreateTableInput.

Source§

impl CreateTableInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<CreateTableOutput, SdkError<CreateTableError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source§

impl Clone for CreateTableInputBuilder

Source§

fn clone(&self) -> CreateTableInputBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for CreateTableInputBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for CreateTableInputBuilder

Source§

fn default() -> CreateTableInputBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for CreateTableInputBuilder

Source§

fn eq(&self, other: &CreateTableInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for CreateTableInputBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,