#[non_exhaustive]pub struct ListDataSourceSyncJobsInput {
pub id: Option<String>,
pub index_id: Option<String>,
pub next_token: Option<String>,
pub max_results: Option<i32>,
pub start_time_filter: Option<TimeRange>,
pub status_filter: Option<DataSourceSyncJobStatus>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.id: Option<String>The identifier of the data source connector.
index_id: Option<String>The identifier of the index used with the data source connector.
next_token: Option<String>If the previous response was incomplete (because there is more data to retrieve), Amazon Kendra returns a pagination token in the response. You can use this pagination token to retrieve the next set of jobs.
max_results: Option<i32>The maximum number of synchronization jobs to return in the response. If there are fewer results in the list, this response contains only the actual results.
start_time_filter: Option<TimeRange>When specified, the synchronization jobs returned in the list are limited to jobs between the specified dates.
status_filter: Option<DataSourceSyncJobStatus>Only returns synchronization jobs with the Status field equal to the specified status.
Implementations§
Source§impl ListDataSourceSyncJobsInput
impl ListDataSourceSyncJobsInput
Sourcepub fn index_id(&self) -> Option<&str>
pub fn index_id(&self) -> Option<&str>
The identifier of the index used with the data source connector.
Sourcepub fn next_token(&self) -> Option<&str>
pub fn next_token(&self) -> Option<&str>
If the previous response was incomplete (because there is more data to retrieve), Amazon Kendra returns a pagination token in the response. You can use this pagination token to retrieve the next set of jobs.
Sourcepub fn max_results(&self) -> Option<i32>
pub fn max_results(&self) -> Option<i32>
The maximum number of synchronization jobs to return in the response. If there are fewer results in the list, this response contains only the actual results.
Sourcepub fn start_time_filter(&self) -> Option<&TimeRange>
pub fn start_time_filter(&self) -> Option<&TimeRange>
When specified, the synchronization jobs returned in the list are limited to jobs between the specified dates.
Sourcepub fn status_filter(&self) -> Option<&DataSourceSyncJobStatus>
pub fn status_filter(&self) -> Option<&DataSourceSyncJobStatus>
Only returns synchronization jobs with the Status field equal to the specified status.
Source§impl ListDataSourceSyncJobsInput
impl ListDataSourceSyncJobsInput
Sourcepub fn builder() -> ListDataSourceSyncJobsInputBuilder
pub fn builder() -> ListDataSourceSyncJobsInputBuilder
Creates a new builder-style object to manufacture ListDataSourceSyncJobsInput.
Trait Implementations§
Source§impl Clone for ListDataSourceSyncJobsInput
impl Clone for ListDataSourceSyncJobsInput
Source§fn clone(&self) -> ListDataSourceSyncJobsInput
fn clone(&self) -> ListDataSourceSyncJobsInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for ListDataSourceSyncJobsInput
impl Debug for ListDataSourceSyncJobsInput
impl StructuralPartialEq for ListDataSourceSyncJobsInput
Auto Trait Implementations§
impl Freeze for ListDataSourceSyncJobsInput
impl RefUnwindSafe for ListDataSourceSyncJobsInput
impl Send for ListDataSourceSyncJobsInput
impl Sync for ListDataSourceSyncJobsInput
impl Unpin for ListDataSourceSyncJobsInput
impl UnwindSafe for ListDataSourceSyncJobsInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);