TumblingWindowBuilder

aws_sdk_iotsitewise::types::builders

Struct TumblingWindowBuilder 

Source 
#[non_exhaustive]
pub struct TumblingWindowBuilder { /* private fields */ }
Expand description

A builder for TumblingWindow.

Implementations§

Source§

impl TumblingWindowBuilder

Source

pub fn interval(self, input: impl Into<String>) -> Self

The time interval for the tumbling window. The interval time must be between 1 minute and 1 week.

IoT SiteWise computes the 1w interval the end of Sunday at midnight each week (UTC), the 1d interval at the end of each day at midnight (UTC), the 1h interval at the end of each hour, and so on.

When IoT SiteWise aggregates data points for metric computations, the start of each interval is exclusive and the end of each interval is inclusive. IoT SiteWise places the computed data point at the end of the interval.

This field is required.
Source

pub fn set_interval(self, input: Option<String>) -> Self

The time interval for the tumbling window. The interval time must be between 1 minute and 1 week.

IoT SiteWise computes the 1w interval the end of Sunday at midnight each week (UTC), the 1d interval at the end of each day at midnight (UTC), the 1h interval at the end of each hour, and so on.

When IoT SiteWise aggregates data points for metric computations, the start of each interval is exclusive and the end of each interval is inclusive. IoT SiteWise places the computed data point at the end of the interval.

Source

pub fn get_interval(&self) -> &Option<String>

The time interval for the tumbling window. The interval time must be between 1 minute and 1 week.

IoT SiteWise computes the 1w interval the end of Sunday at midnight each week (UTC), the 1d interval at the end of each day at midnight (UTC), the 1h interval at the end of each hour, and so on.

When IoT SiteWise aggregates data points for metric computations, the start of each interval is exclusive and the end of each interval is inclusive. IoT SiteWise places the computed data point at the end of the interval.

Source

pub fn offset(self, input: impl Into<String>) -> Self

The offset for the tumbling window. The offset parameter accepts the following:

  • The offset time.

    For example, if you specify 18h for offset and 1d for interval, IoT SiteWise aggregates data in one of the following ways:

    • If you create the metric before or at 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) on the day when you create the metric.

    • If you create the metric after 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) the next day.

  • The ISO 8601 format.

    For example, if you specify PT18H for offset and 1d for interval, IoT SiteWise aggregates data in one of the following ways:

    • If you create the metric before or at 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) on the day when you create the metric.

    • If you create the metric after 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) the next day.

  • The 24-hour clock.

    For example, if you specify 00:03:00 for offset, 5m for interval, and you create the metric at 2 PM (UTC), you get the first aggregation result at 2:03 PM (UTC). You get the second aggregation result at 2:08 PM (UTC).

  • The offset time zone.

    For example, if you specify 2021-07-23T18:00-08 for offset and 1d for interval, IoT SiteWise aggregates data in one of the following ways:

    • If you create the metric before or at 6 PM (PST), you get the first aggregation result at 6 PM (PST) on the day when you create the metric.

    • If you create the metric after 6 PM (PST), you get the first aggregation result at 6 PM (PST) the next day.

Source

pub fn set_offset(self, input: Option<String>) -> Self

The offset for the tumbling window. The offset parameter accepts the following:

  • The offset time.

    For example, if you specify 18h for offset and 1d for interval, IoT SiteWise aggregates data in one of the following ways:

    • If you create the metric before or at 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) on the day when you create the metric.

    • If you create the metric after 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) the next day.

  • The ISO 8601 format.

    For example, if you specify PT18H for offset and 1d for interval, IoT SiteWise aggregates data in one of the following ways:

    • If you create the metric before or at 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) on the day when you create the metric.

    • If you create the metric after 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) the next day.

  • The 24-hour clock.

    For example, if you specify 00:03:00 for offset, 5m for interval, and you create the metric at 2 PM (UTC), you get the first aggregation result at 2:03 PM (UTC). You get the second aggregation result at 2:08 PM (UTC).

  • The offset time zone.

    For example, if you specify 2021-07-23T18:00-08 for offset and 1d for interval, IoT SiteWise aggregates data in one of the following ways:

    • If you create the metric before or at 6 PM (PST), you get the first aggregation result at 6 PM (PST) on the day when you create the metric.

    • If you create the metric after 6 PM (PST), you get the first aggregation result at 6 PM (PST) the next day.

Source

pub fn get_offset(&self) -> &Option<String>

The offset for the tumbling window. The offset parameter accepts the following:

  • The offset time.

    For example, if you specify 18h for offset and 1d for interval, IoT SiteWise aggregates data in one of the following ways:

    • If you create the metric before or at 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) on the day when you create the metric.

    • If you create the metric after 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) the next day.

  • The ISO 8601 format.

    For example, if you specify PT18H for offset and 1d for interval, IoT SiteWise aggregates data in one of the following ways:

    • If you create the metric before or at 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) on the day when you create the metric.

    • If you create the metric after 6 PM (UTC), you get the first aggregation result at 6 PM (UTC) the next day.

  • The 24-hour clock.

    For example, if you specify 00:03:00 for offset, 5m for interval, and you create the metric at 2 PM (UTC), you get the first aggregation result at 2:03 PM (UTC). You get the second aggregation result at 2:08 PM (UTC).

  • The offset time zone.

    For example, if you specify 2021-07-23T18:00-08 for offset and 1d for interval, IoT SiteWise aggregates data in one of the following ways:

    • If you create the metric before or at 6 PM (PST), you get the first aggregation result at 6 PM (PST) on the day when you create the metric.

    • If you create the metric after 6 PM (PST), you get the first aggregation result at 6 PM (PST) the next day.

Source

pub fn build(self) -> Result<TumblingWindow, BuildError>

Consumes the builder and constructs a TumblingWindow. This method will fail if any of the following fields are not set:

Trait Implementations§

Source§

impl Clone for TumblingWindowBuilder

Source§

fn clone(&self) -> TumblingWindowBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for TumblingWindowBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for TumblingWindowBuilder

Source§

fn default() -> TumblingWindowBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for TumblingWindowBuilder

Source§

fn eq(&self, other: &TumblingWindowBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for TumblingWindowBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more