#[non_exhaustive]pub struct UpdateTopicRuleDestinationInput {
pub arn: Option<String>,
pub status: Option<TopicRuleDestinationStatus>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.arn: Option<String>
The ARN of the topic rule destination.
status: Option<TopicRuleDestinationStatus>
The status of the topic rule destination. Valid values are:
- IN_PROGRESS
-
A topic rule destination was created but has not been confirmed. You can set
status
toIN_PROGRESS
by callingUpdateTopicRuleDestination
. CallingUpdateTopicRuleDestination
causes a new confirmation challenge to be sent to your confirmation endpoint. - ENABLED
-
Confirmation was completed, and traffic to this destination is allowed. You can set
status
toDISABLED
by callingUpdateTopicRuleDestination
. - DISABLED
-
Confirmation was completed, and traffic to this destination is not allowed. You can set
status
toENABLED
by callingUpdateTopicRuleDestination
. - ERROR
-
Confirmation could not be completed, for example if the confirmation timed out. You can call
GetTopicRuleDestination
for details about the error. You can setstatus
toIN_PROGRESS
by callingUpdateTopicRuleDestination
. CallingUpdateTopicRuleDestination
causes a new confirmation challenge to be sent to your confirmation endpoint.
Implementations§
Source§impl UpdateTopicRuleDestinationInput
impl UpdateTopicRuleDestinationInput
Sourcepub fn status(&self) -> Option<&TopicRuleDestinationStatus>
pub fn status(&self) -> Option<&TopicRuleDestinationStatus>
The status of the topic rule destination. Valid values are:
- IN_PROGRESS
-
A topic rule destination was created but has not been confirmed. You can set
status
toIN_PROGRESS
by callingUpdateTopicRuleDestination
. CallingUpdateTopicRuleDestination
causes a new confirmation challenge to be sent to your confirmation endpoint. - ENABLED
-
Confirmation was completed, and traffic to this destination is allowed. You can set
status
toDISABLED
by callingUpdateTopicRuleDestination
. - DISABLED
-
Confirmation was completed, and traffic to this destination is not allowed. You can set
status
toENABLED
by callingUpdateTopicRuleDestination
. - ERROR
-
Confirmation could not be completed, for example if the confirmation timed out. You can call
GetTopicRuleDestination
for details about the error. You can setstatus
toIN_PROGRESS
by callingUpdateTopicRuleDestination
. CallingUpdateTopicRuleDestination
causes a new confirmation challenge to be sent to your confirmation endpoint.
Source§impl UpdateTopicRuleDestinationInput
impl UpdateTopicRuleDestinationInput
Sourcepub fn builder() -> UpdateTopicRuleDestinationInputBuilder
pub fn builder() -> UpdateTopicRuleDestinationInputBuilder
Creates a new builder-style object to manufacture UpdateTopicRuleDestinationInput
.
Trait Implementations§
Source§impl Clone for UpdateTopicRuleDestinationInput
impl Clone for UpdateTopicRuleDestinationInput
Source§fn clone(&self) -> UpdateTopicRuleDestinationInput
fn clone(&self) -> UpdateTopicRuleDestinationInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl PartialEq for UpdateTopicRuleDestinationInput
impl PartialEq for UpdateTopicRuleDestinationInput
Source§fn eq(&self, other: &UpdateTopicRuleDestinationInput) -> bool
fn eq(&self, other: &UpdateTopicRuleDestinationInput) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for UpdateTopicRuleDestinationInput
Auto Trait Implementations§
impl Freeze for UpdateTopicRuleDestinationInput
impl RefUnwindSafe for UpdateTopicRuleDestinationInput
impl Send for UpdateTopicRuleDestinationInput
impl Sync for UpdateTopicRuleDestinationInput
impl Unpin for UpdateTopicRuleDestinationInput
impl UnwindSafe for UpdateTopicRuleDestinationInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);