#[non_exhaustive]pub struct UpdateAccountAuditConfigurationInput {
pub role_arn: Option<String>,
pub audit_notification_target_configurations: Option<HashMap<AuditNotificationType, AuditNotificationTarget>>,
pub audit_check_configurations: Option<HashMap<String, AuditCheckConfiguration>>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.role_arn: Option<String>
The Amazon Resource Name (ARN) of the role that grants permission to IoT to access information about your devices, policies, certificates, and other items as required when performing an audit.
audit_notification_target_configurations: Option<HashMap<AuditNotificationType, AuditNotificationTarget>>
Information about the targets to which audit notifications are sent.
audit_check_configurations: Option<HashMap<String, AuditCheckConfiguration>>
Specifies which audit checks are enabled and disabled for this account. Use DescribeAccountAuditConfiguration
to see the list of all checks, including those that are currently enabled.
Some data collection might start immediately when certain checks are enabled. When a check is disabled, any data collected so far in relation to the check is deleted.
You cannot disable a check if it's used by any scheduled audit. You must first delete the check from the scheduled audit or delete the scheduled audit itself.
On the first call to UpdateAccountAuditConfiguration
, this parameter is required and must specify at least one enabled check.
Implementations§
Source§impl UpdateAccountAuditConfigurationInput
impl UpdateAccountAuditConfigurationInput
Sourcepub fn role_arn(&self) -> Option<&str>
pub fn role_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the role that grants permission to IoT to access information about your devices, policies, certificates, and other items as required when performing an audit.
Sourcepub fn audit_notification_target_configurations(
&self,
) -> Option<&HashMap<AuditNotificationType, AuditNotificationTarget>>
pub fn audit_notification_target_configurations( &self, ) -> Option<&HashMap<AuditNotificationType, AuditNotificationTarget>>
Information about the targets to which audit notifications are sent.
Sourcepub fn audit_check_configurations(
&self,
) -> Option<&HashMap<String, AuditCheckConfiguration>>
pub fn audit_check_configurations( &self, ) -> Option<&HashMap<String, AuditCheckConfiguration>>
Specifies which audit checks are enabled and disabled for this account. Use DescribeAccountAuditConfiguration
to see the list of all checks, including those that are currently enabled.
Some data collection might start immediately when certain checks are enabled. When a check is disabled, any data collected so far in relation to the check is deleted.
You cannot disable a check if it's used by any scheduled audit. You must first delete the check from the scheduled audit or delete the scheduled audit itself.
On the first call to UpdateAccountAuditConfiguration
, this parameter is required and must specify at least one enabled check.
Source§impl UpdateAccountAuditConfigurationInput
impl UpdateAccountAuditConfigurationInput
Sourcepub fn builder() -> UpdateAccountAuditConfigurationInputBuilder
pub fn builder() -> UpdateAccountAuditConfigurationInputBuilder
Creates a new builder-style object to manufacture UpdateAccountAuditConfigurationInput
.
Trait Implementations§
Source§impl Clone for UpdateAccountAuditConfigurationInput
impl Clone for UpdateAccountAuditConfigurationInput
Source§fn clone(&self) -> UpdateAccountAuditConfigurationInput
fn clone(&self) -> UpdateAccountAuditConfigurationInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl PartialEq for UpdateAccountAuditConfigurationInput
impl PartialEq for UpdateAccountAuditConfigurationInput
Source§fn eq(&self, other: &UpdateAccountAuditConfigurationInput) -> bool
fn eq(&self, other: &UpdateAccountAuditConfigurationInput) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for UpdateAccountAuditConfigurationInput
Auto Trait Implementations§
impl Freeze for UpdateAccountAuditConfigurationInput
impl RefUnwindSafe for UpdateAccountAuditConfigurationInput
impl Send for UpdateAccountAuditConfigurationInput
impl Sync for UpdateAccountAuditConfigurationInput
impl Unpin for UpdateAccountAuditConfigurationInput
impl UnwindSafe for UpdateAccountAuditConfigurationInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);