#[non_exhaustive]pub struct StartAuditMitigationActionsTaskInputBuilder { /* private fields */ }
Expand description
A builder for StartAuditMitigationActionsTaskInput
.
Implementations§
Source§impl StartAuditMitigationActionsTaskInputBuilder
impl StartAuditMitigationActionsTaskInputBuilder
Sourcepub fn task_id(self, input: impl Into<String>) -> Self
pub fn task_id(self, input: impl Into<String>) -> Self
A unique identifier for the task. You can use this identifier to check the status of the task or to cancel it.
This field is required.Sourcepub fn set_task_id(self, input: Option<String>) -> Self
pub fn set_task_id(self, input: Option<String>) -> Self
A unique identifier for the task. You can use this identifier to check the status of the task or to cancel it.
Sourcepub fn get_task_id(&self) -> &Option<String>
pub fn get_task_id(&self) -> &Option<String>
A unique identifier for the task. You can use this identifier to check the status of the task or to cancel it.
Sourcepub fn target(self, input: AuditMitigationActionsTaskTarget) -> Self
pub fn target(self, input: AuditMitigationActionsTaskTarget) -> Self
Specifies the audit findings to which the mitigation actions are applied. You can apply them to a type of audit check, to all findings from an audit, or to a specific set of findings.
This field is required.Sourcepub fn set_target(self, input: Option<AuditMitigationActionsTaskTarget>) -> Self
pub fn set_target(self, input: Option<AuditMitigationActionsTaskTarget>) -> Self
Specifies the audit findings to which the mitigation actions are applied. You can apply them to a type of audit check, to all findings from an audit, or to a specific set of findings.
Sourcepub fn get_target(&self) -> &Option<AuditMitigationActionsTaskTarget>
pub fn get_target(&self) -> &Option<AuditMitigationActionsTaskTarget>
Specifies the audit findings to which the mitigation actions are applied. You can apply them to a type of audit check, to all findings from an audit, or to a specific set of findings.
Sourcepub fn audit_check_to_actions_mapping(
self,
k: impl Into<String>,
v: Vec<String>,
) -> Self
pub fn audit_check_to_actions_mapping( self, k: impl Into<String>, v: Vec<String>, ) -> Self
Adds a key-value pair to audit_check_to_actions_mapping
.
To override the contents of this collection use set_audit_check_to_actions_mapping
.
For an audit check, specifies which mitigation actions to apply. Those actions must be defined in your Amazon Web Services accounts.
Sourcepub fn set_audit_check_to_actions_mapping(
self,
input: Option<HashMap<String, Vec<String>>>,
) -> Self
pub fn set_audit_check_to_actions_mapping( self, input: Option<HashMap<String, Vec<String>>>, ) -> Self
For an audit check, specifies which mitigation actions to apply. Those actions must be defined in your Amazon Web Services accounts.
Sourcepub fn get_audit_check_to_actions_mapping(
&self,
) -> &Option<HashMap<String, Vec<String>>>
pub fn get_audit_check_to_actions_mapping( &self, ) -> &Option<HashMap<String, Vec<String>>>
For an audit check, specifies which mitigation actions to apply. Those actions must be defined in your Amazon Web Services accounts.
Sourcepub fn client_request_token(self, input: impl Into<String>) -> Self
pub fn client_request_token(self, input: impl Into<String>) -> Self
Each audit mitigation task must have a unique client request token. If you try to start a new task with the same token as a task that already exists, an exception occurs. If you omit this value, a unique client request token is generated automatically.
This field is required.Sourcepub fn set_client_request_token(self, input: Option<String>) -> Self
pub fn set_client_request_token(self, input: Option<String>) -> Self
Each audit mitigation task must have a unique client request token. If you try to start a new task with the same token as a task that already exists, an exception occurs. If you omit this value, a unique client request token is generated automatically.
Sourcepub fn get_client_request_token(&self) -> &Option<String>
pub fn get_client_request_token(&self) -> &Option<String>
Each audit mitigation task must have a unique client request token. If you try to start a new task with the same token as a task that already exists, an exception occurs. If you omit this value, a unique client request token is generated automatically.
Sourcepub fn build(self) -> Result<StartAuditMitigationActionsTaskInput, BuildError>
pub fn build(self) -> Result<StartAuditMitigationActionsTaskInput, BuildError>
Consumes the builder and constructs a StartAuditMitigationActionsTaskInput
.
Source§impl StartAuditMitigationActionsTaskInputBuilder
impl StartAuditMitigationActionsTaskInputBuilder
Sourcepub async fn send_with(
self,
client: &Client,
) -> Result<StartAuditMitigationActionsTaskOutput, SdkError<StartAuditMitigationActionsTaskError, HttpResponse>>
pub async fn send_with( self, client: &Client, ) -> Result<StartAuditMitigationActionsTaskOutput, SdkError<StartAuditMitigationActionsTaskError, HttpResponse>>
Sends a request with this input using the given client.
Trait Implementations§
Source§impl Clone for StartAuditMitigationActionsTaskInputBuilder
impl Clone for StartAuditMitigationActionsTaskInputBuilder
Source§fn clone(&self) -> StartAuditMitigationActionsTaskInputBuilder
fn clone(&self) -> StartAuditMitigationActionsTaskInputBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Default for StartAuditMitigationActionsTaskInputBuilder
impl Default for StartAuditMitigationActionsTaskInputBuilder
Source§fn default() -> StartAuditMitigationActionsTaskInputBuilder
fn default() -> StartAuditMitigationActionsTaskInputBuilder
Source§impl PartialEq for StartAuditMitigationActionsTaskInputBuilder
impl PartialEq for StartAuditMitigationActionsTaskInputBuilder
Source§fn eq(&self, other: &StartAuditMitigationActionsTaskInputBuilder) -> bool
fn eq(&self, other: &StartAuditMitigationActionsTaskInputBuilder) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for StartAuditMitigationActionsTaskInputBuilder
Auto Trait Implementations§
impl Freeze for StartAuditMitigationActionsTaskInputBuilder
impl RefUnwindSafe for StartAuditMitigationActionsTaskInputBuilder
impl Send for StartAuditMitigationActionsTaskInputBuilder
impl Sync for StartAuditMitigationActionsTaskInputBuilder
impl Unpin for StartAuditMitigationActionsTaskInputBuilder
impl UnwindSafe for StartAuditMitigationActionsTaskInputBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);