pub struct CreateMonitorFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateMonitor.
Creates a monitor in Amazon CloudWatch Internet Monitor. A monitor is built based on information from the application resources that you add: VPCs, Network Load Balancers (NLBs), Amazon CloudFront distributions, and Amazon WorkSpaces directories. Internet Monitor then publishes internet measurements from Amazon Web Services that are specific to the city-networks. That is, the locations and ASNs (typically internet service providers or ISPs), where clients access your application. For more information, see Using Amazon CloudWatch Internet Monitor in the Amazon CloudWatch User Guide.
When you create a monitor, you choose the percentage of traffic that you want to monitor. You can also set a maximum limit for the number of city-networks where client traffic is monitored, that caps the total traffic that Internet Monitor monitors. A city-network maximum is the limit of city-networks, but you only pay for the number of city-networks that are actually monitored. You can update your monitor at any time to change the percentage of traffic to monitor or the city-networks maximum. For more information, see Choosing a city-network maximum value in the Amazon CloudWatch User Guide.
Implementations§
Source§impl CreateMonitorFluentBuilder
impl CreateMonitorFluentBuilder
Sourcepub fn as_input(&self) -> &CreateMonitorInputBuilder
pub fn as_input(&self) -> &CreateMonitorInputBuilder
Access the CreateMonitor as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateMonitorOutput, SdkError<CreateMonitorError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateMonitorOutput, SdkError<CreateMonitorError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateMonitorOutput, CreateMonitorError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateMonitorOutput, CreateMonitorError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn monitor_name(self, input: impl Into<String>) -> Self
pub fn monitor_name(self, input: impl Into<String>) -> Self
The name of the monitor.
Sourcepub fn set_monitor_name(self, input: Option<String>) -> Self
pub fn set_monitor_name(self, input: Option<String>) -> Self
The name of the monitor.
Sourcepub fn get_monitor_name(&self) -> &Option<String>
pub fn get_monitor_name(&self) -> &Option<String>
The name of the monitor.
Sourcepub fn resources(self, input: impl Into<String>) -> Self
pub fn resources(self, input: impl Into<String>) -> Self
Appends an item to Resources.
To override the contents of this collection use set_resources.
The resources to include in a monitor, which you provide as a set of Amazon Resource Names (ARNs). Resources can be VPCs, NLBs, Amazon CloudFront distributions, or Amazon WorkSpaces directories.
You can add a combination of VPCs and CloudFront distributions, or you can add WorkSpaces directories, or you can add NLBs. You can't add NLBs or WorkSpaces directories together with any other resources.
If you add only Amazon VPC resources, at least one VPC must have an Internet Gateway attached to it, to make sure that it has internet connectivity.
Sourcepub fn set_resources(self, input: Option<Vec<String>>) -> Self
pub fn set_resources(self, input: Option<Vec<String>>) -> Self
The resources to include in a monitor, which you provide as a set of Amazon Resource Names (ARNs). Resources can be VPCs, NLBs, Amazon CloudFront distributions, or Amazon WorkSpaces directories.
You can add a combination of VPCs and CloudFront distributions, or you can add WorkSpaces directories, or you can add NLBs. You can't add NLBs or WorkSpaces directories together with any other resources.
If you add only Amazon VPC resources, at least one VPC must have an Internet Gateway attached to it, to make sure that it has internet connectivity.
Sourcepub fn get_resources(&self) -> &Option<Vec<String>>
pub fn get_resources(&self) -> &Option<Vec<String>>
The resources to include in a monitor, which you provide as a set of Amazon Resource Names (ARNs). Resources can be VPCs, NLBs, Amazon CloudFront distributions, or Amazon WorkSpaces directories.
You can add a combination of VPCs and CloudFront distributions, or you can add WorkSpaces directories, or you can add NLBs. You can't add NLBs or WorkSpaces directories together with any other resources.
If you add only Amazon VPC resources, at least one VPC must have an Internet Gateway attached to it, to make sure that it has internet connectivity.
Sourcepub fn client_token(self, input: impl Into<String>) -> Self
pub fn client_token(self, input: impl Into<String>) -> Self
A unique, case-sensitive string of up to 64 ASCII characters that you specify to make an idempotent API request. Don't reuse the same client token for other API requests.
Sourcepub fn set_client_token(self, input: Option<String>) -> Self
pub fn set_client_token(self, input: Option<String>) -> Self
A unique, case-sensitive string of up to 64 ASCII characters that you specify to make an idempotent API request. Don't reuse the same client token for other API requests.
Sourcepub fn get_client_token(&self) -> &Option<String>
pub fn get_client_token(&self) -> &Option<String>
A unique, case-sensitive string of up to 64 ASCII characters that you specify to make an idempotent API request. Don't reuse the same client token for other API requests.
Adds a key-value pair to Tags.
To override the contents of this collection use set_tags.
The tags for a monitor. You can add a maximum of 50 tags in Internet Monitor.
The tags for a monitor. You can add a maximum of 50 tags in Internet Monitor.
The tags for a monitor. You can add a maximum of 50 tags in Internet Monitor.
Sourcepub fn max_city_networks_to_monitor(self, input: i32) -> Self
pub fn max_city_networks_to_monitor(self, input: i32) -> Self
The maximum number of city-networks to monitor for your resources. A city-network is the location (city) where clients access your application resources from and the ASN or network provider, such as an internet service provider (ISP), that clients access the resources through. Setting this limit can help control billing costs.
To learn more, see Choosing a city-network maximum value in the Amazon CloudWatch Internet Monitor section of the CloudWatch User Guide.
Sourcepub fn set_max_city_networks_to_monitor(self, input: Option<i32>) -> Self
pub fn set_max_city_networks_to_monitor(self, input: Option<i32>) -> Self
The maximum number of city-networks to monitor for your resources. A city-network is the location (city) where clients access your application resources from and the ASN or network provider, such as an internet service provider (ISP), that clients access the resources through. Setting this limit can help control billing costs.
To learn more, see Choosing a city-network maximum value in the Amazon CloudWatch Internet Monitor section of the CloudWatch User Guide.
Sourcepub fn get_max_city_networks_to_monitor(&self) -> &Option<i32>
pub fn get_max_city_networks_to_monitor(&self) -> &Option<i32>
The maximum number of city-networks to monitor for your resources. A city-network is the location (city) where clients access your application resources from and the ASN or network provider, such as an internet service provider (ISP), that clients access the resources through. Setting this limit can help control billing costs.
To learn more, see Choosing a city-network maximum value in the Amazon CloudWatch Internet Monitor section of the CloudWatch User Guide.
Sourcepub fn internet_measurements_log_delivery(
self,
input: InternetMeasurementsLogDelivery,
) -> Self
pub fn internet_measurements_log_delivery( self, input: InternetMeasurementsLogDelivery, ) -> Self
Publish internet measurements for Internet Monitor to an Amazon S3 bucket in addition to CloudWatch Logs.
Sourcepub fn set_internet_measurements_log_delivery(
self,
input: Option<InternetMeasurementsLogDelivery>,
) -> Self
pub fn set_internet_measurements_log_delivery( self, input: Option<InternetMeasurementsLogDelivery>, ) -> Self
Publish internet measurements for Internet Monitor to an Amazon S3 bucket in addition to CloudWatch Logs.
Sourcepub fn get_internet_measurements_log_delivery(
&self,
) -> &Option<InternetMeasurementsLogDelivery>
pub fn get_internet_measurements_log_delivery( &self, ) -> &Option<InternetMeasurementsLogDelivery>
Publish internet measurements for Internet Monitor to an Amazon S3 bucket in addition to CloudWatch Logs.
Sourcepub fn traffic_percentage_to_monitor(self, input: i32) -> Self
pub fn traffic_percentage_to_monitor(self, input: i32) -> Self
The percentage of the internet-facing traffic for your application that you want to monitor with this monitor. If you set a city-networks maximum, that limit overrides the traffic percentage that you set.
To learn more, see Choosing an application traffic percentage to monitor in the Amazon CloudWatch Internet Monitor section of the CloudWatch User Guide.
Sourcepub fn set_traffic_percentage_to_monitor(self, input: Option<i32>) -> Self
pub fn set_traffic_percentage_to_monitor(self, input: Option<i32>) -> Self
The percentage of the internet-facing traffic for your application that you want to monitor with this monitor. If you set a city-networks maximum, that limit overrides the traffic percentage that you set.
To learn more, see Choosing an application traffic percentage to monitor in the Amazon CloudWatch Internet Monitor section of the CloudWatch User Guide.
Sourcepub fn get_traffic_percentage_to_monitor(&self) -> &Option<i32>
pub fn get_traffic_percentage_to_monitor(&self) -> &Option<i32>
The percentage of the internet-facing traffic for your application that you want to monitor with this monitor. If you set a city-networks maximum, that limit overrides the traffic percentage that you set.
To learn more, see Choosing an application traffic percentage to monitor in the Amazon CloudWatch Internet Monitor section of the CloudWatch User Guide.
Sourcepub fn health_events_config(self, input: HealthEventsConfig) -> Self
pub fn health_events_config(self, input: HealthEventsConfig) -> Self
Defines the threshold percentages and other configuration information for when Amazon CloudWatch Internet Monitor creates a health event. Internet Monitor creates a health event when an internet issue that affects your application end users has a health score percentage that is at or below a specific threshold, and, sometimes, when other criteria are met.
If you don't set a health event threshold, the default value is 95%.
For more information, see Change health event thresholds in the Internet Monitor section of the CloudWatch User Guide.
Sourcepub fn set_health_events_config(self, input: Option<HealthEventsConfig>) -> Self
pub fn set_health_events_config(self, input: Option<HealthEventsConfig>) -> Self
Defines the threshold percentages and other configuration information for when Amazon CloudWatch Internet Monitor creates a health event. Internet Monitor creates a health event when an internet issue that affects your application end users has a health score percentage that is at or below a specific threshold, and, sometimes, when other criteria are met.
If you don't set a health event threshold, the default value is 95%.
For more information, see Change health event thresholds in the Internet Monitor section of the CloudWatch User Guide.
Sourcepub fn get_health_events_config(&self) -> &Option<HealthEventsConfig>
pub fn get_health_events_config(&self) -> &Option<HealthEventsConfig>
Defines the threshold percentages and other configuration information for when Amazon CloudWatch Internet Monitor creates a health event. Internet Monitor creates a health event when an internet issue that affects your application end users has a health score percentage that is at or below a specific threshold, and, sometimes, when other criteria are met.
If you don't set a health event threshold, the default value is 95%.
For more information, see Change health event thresholds in the Internet Monitor section of the CloudWatch User Guide.
Trait Implementations§
Source§impl Clone for CreateMonitorFluentBuilder
impl Clone for CreateMonitorFluentBuilder
Source§fn clone(&self) -> CreateMonitorFluentBuilder
fn clone(&self) -> CreateMonitorFluentBuilder
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateMonitorFluentBuilder
impl !RefUnwindSafe for CreateMonitorFluentBuilder
impl Send for CreateMonitorFluentBuilder
impl Sync for CreateMonitorFluentBuilder
impl Unpin for CreateMonitorFluentBuilder
impl !UnwindSafe for CreateMonitorFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);