Struct UploadServerCertificateInputBuilder

#[non_exhaustive]
pub struct UploadServerCertificateInputBuilder { /* private fields */ }

A builder for UploadServerCertificateInput.

Implementations

impl UploadServerCertificateInputBuilder

pub fn path(self, input: impl Into<String>) -> Self

The path for the server certificate. For more information about paths, see IAM identifiers in the IAM User Guide.

This parameter is optional. If it is not included, it defaults to a slash (/). This parameter allows (through its regex pattern) a string of characters consisting of either a forward slash (/) by itself or a string that must begin and end with forward slashes. In addition, it can contain any ASCII character from the ! (\u0021) through the DEL character (\u007F), including most punctuation characters, digits, and upper and lowercased letters.

If you are uploading a server certificate specifically for use with Amazon CloudFront distributions, you must specify a path using the path parameter. The path must begin with /cloudfront and must include a trailing slash (for example, /cloudfront/test/).

pub fn set_path(self, input: Option<String>) -> Self

The path for the server certificate. For more information about paths, see IAM identifiers in the IAM User Guide.

This parameter is optional. If it is not included, it defaults to a slash (/). This parameter allows (through its regex pattern) a string of characters consisting of either a forward slash (/) by itself or a string that must begin and end with forward slashes. In addition, it can contain any ASCII character from the ! (\u0021) through the DEL character (\u007F), including most punctuation characters, digits, and upper and lowercased letters.

If you are uploading a server certificate specifically for use with Amazon CloudFront distributions, you must specify a path using the path parameter. The path must begin with /cloudfront and must include a trailing slash (for example, /cloudfront/test/).

pub fn get_path(&self) -> &Option<String>

The path for the server certificate. For more information about paths, see IAM identifiers in the IAM User Guide.

This parameter is optional. If it is not included, it defaults to a slash (/). This parameter allows (through its regex pattern) a string of characters consisting of either a forward slash (/) by itself or a string that must begin and end with forward slashes. In addition, it can contain any ASCII character from the ! (\u0021) through the DEL character (\u007F), including most punctuation characters, digits, and upper and lowercased letters.

If you are uploading a server certificate specifically for use with Amazon CloudFront distributions, you must specify a path using the path parameter. The path must begin with /cloudfront and must include a trailing slash (for example, /cloudfront/test/).

pub fn server_certificate_name(self, input: impl Into<String>) -> Self

The name for the server certificate. Do not include the path in this value. The name of the certificate cannot contain any spaces.

This parameter allows (through its regex pattern) a string of characters consisting of upper and lowercase alphanumeric characters with no spaces. You can also include any of the following characters: _+=,.@-

This field is required.

pub fn set_server_certificate_name(self, input: Option<String>) -> Self

The name for the server certificate. Do not include the path in this value. The name of the certificate cannot contain any spaces.

This parameter allows (through its regex pattern) a string of characters consisting of upper and lowercase alphanumeric characters with no spaces. You can also include any of the following characters: _+=,.@-

pub fn get_server_certificate_name(&self) -> &Option<String>

The name for the server certificate. Do not include the path in this value. The name of the certificate cannot contain any spaces.

This parameter allows (through its regex pattern) a string of characters consisting of upper and lowercase alphanumeric characters with no spaces. You can also include any of the following characters: _+=,.@-

pub fn certificate_body(self, input: impl Into<String>) -> Self

The contents of the public key certificate in PEM-encoded format.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

This field is required.

pub fn set_certificate_body(self, input: Option<String>) -> Self

The contents of the public key certificate in PEM-encoded format.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn get_certificate_body(&self) -> &Option<String>

The contents of the public key certificate in PEM-encoded format.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn private_key(self, input: impl Into<String>) -> Self

The contents of the private key in PEM-encoded format.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

This field is required.

pub fn set_private_key(self, input: Option<String>) -> Self

The contents of the private key in PEM-encoded format.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn get_private_key(&self) -> &Option<String>

The contents of the private key in PEM-encoded format.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn certificate_chain(self, input: impl Into<String>) -> Self

The contents of the certificate chain. This is typically a concatenation of the PEM-encoded public key certificates of the chain.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn set_certificate_chain(self, input: Option<String>) -> Self

The contents of the certificate chain. This is typically a concatenation of the PEM-encoded public key certificates of the chain.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn get_certificate_chain(&self) -> &Option<String>

The contents of the certificate chain. This is typically a concatenation of the PEM-encoded public key certificates of the chain.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

A list of tags that you want to attach to the new IAM server certificate resource. Each tag consists of a key name and an associated value. For more information about tagging, see Tagging IAM resources in the IAM User Guide.

If any one of the tags is invalid or if you exceed the allowed maximum number of tags, then the entire request fails and the resource is not created.

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

A list of tags that you want to attach to the new IAM server certificate resource. Each tag consists of a key name and an associated value. For more information about tagging, see Tagging IAM resources in the IAM User Guide.

If any one of the tags is invalid or if you exceed the allowed maximum number of tags, then the entire request fails and the resource is not created.

pub fn get_tags(&self) -> &Option<Vec<Tag>>

A list of tags that you want to attach to the new IAM server certificate resource. Each tag consists of a key name and an associated value. For more information about tagging, see Tagging IAM resources in the IAM User Guide.

If any one of the tags is invalid or if you exceed the allowed maximum number of tags, then the entire request fails and the resource is not created.

pub fn build(self) -> Result<UploadServerCertificateInput, BuildError>

Consumes the builder and constructs a UploadServerCertificateInput.

impl UploadServerCertificateInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<UploadServerCertificateOutput, SdkError<UploadServerCertificateError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for UploadServerCertificateInputBuilder

fn clone(&self) -> UploadServerCertificateInputBuilder

Returns a duplicate of the value.

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UploadServerCertificateInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for UploadServerCertificateInputBuilder

fn default() -> UploadServerCertificateInputBuilder

Returns the “default value” for a type.

impl PartialEq for UploadServerCertificateInputBuilder

fn eq(&self, other: &UploadServerCertificateInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for UploadServerCertificateInputBuilder