Struct SimulateCustomPolicyInputBuilder

#[non_exhaustive]
pub struct SimulateCustomPolicyInputBuilder { /* private fields */ }

A builder for SimulateCustomPolicyInput.

Implementations

impl SimulateCustomPolicyInputBuilder

pub fn policy_input_list(self, input: impl Into<String>) -> Self

Appends an item to policy_input_list.

To override the contents of this collection use set_policy_input_list.

A list of policy documents to include in the simulation. Each document is specified as a string containing the complete, valid JSON text of an IAM policy. Do not include any resource-based policies in this parameter. Any resource-based policy must be submitted with the ResourcePolicy parameter. The policies cannot be "scope-down" policies, such as you could include in a call to GetFederationToken or one of the AssumeRole API operations. In other words, do not use policies designed to restrict what a user can do while using the temporary credentials.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn set_policy_input_list(self, input: Option<Vec<String>>) -> Self

A list of policy documents to include in the simulation. Each document is specified as a string containing the complete, valid JSON text of an IAM policy. Do not include any resource-based policies in this parameter. Any resource-based policy must be submitted with the ResourcePolicy parameter. The policies cannot be "scope-down" policies, such as you could include in a call to GetFederationToken or one of the AssumeRole API operations. In other words, do not use policies designed to restrict what a user can do while using the temporary credentials.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn get_policy_input_list(&self) -> &Option<Vec<String>>

A list of policy documents to include in the simulation. Each document is specified as a string containing the complete, valid JSON text of an IAM policy. Do not include any resource-based policies in this parameter. Any resource-based policy must be submitted with the ResourcePolicy parameter. The policies cannot be "scope-down" policies, such as you could include in a call to GetFederationToken or one of the AssumeRole API operations. In other words, do not use policies designed to restrict what a user can do while using the temporary credentials.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn permissions_boundary_policy_input_list( self, input: impl Into<String>, ) -> Self

Appends an item to permissions_boundary_policy_input_list.

To override the contents of this collection use set_permissions_boundary_policy_input_list.

The IAM permissions boundary policy to simulate. The permissions boundary sets the maximum permissions that an IAM entity can have. You can input only one permissions boundary when you pass a policy to this operation. For more information about permissions boundaries, see Permissions boundaries for IAM entities in the IAM User Guide. The policy input is specified as a string that contains the complete, valid JSON text of a permissions boundary policy.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn set_permissions_boundary_policy_input_list( self, input: Option<Vec<String>>, ) -> Self

The IAM permissions boundary policy to simulate. The permissions boundary sets the maximum permissions that an IAM entity can have. You can input only one permissions boundary when you pass a policy to this operation. For more information about permissions boundaries, see Permissions boundaries for IAM entities in the IAM User Guide. The policy input is specified as a string that contains the complete, valid JSON text of a permissions boundary policy.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn get_permissions_boundary_policy_input_list(&self) -> &Option<Vec<String>>

The IAM permissions boundary policy to simulate. The permissions boundary sets the maximum permissions that an IAM entity can have. You can input only one permissions boundary when you pass a policy to this operation. For more information about permissions boundaries, see Permissions boundaries for IAM entities in the IAM User Guide. The policy input is specified as a string that contains the complete, valid JSON text of a permissions boundary policy.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn action_names(self, input: impl Into<String>) -> Self

Appends an item to action_names.

To override the contents of this collection use set_action_names.

A list of names of API operations to evaluate in the simulation. Each operation is evaluated against each resource. Each operation must include the service identifier, such as iam:CreateUser. This operation does not support using wildcards (*) in an action name.

pub fn set_action_names(self, input: Option<Vec<String>>) -> Self

A list of names of API operations to evaluate in the simulation. Each operation is evaluated against each resource. Each operation must include the service identifier, such as iam:CreateUser. This operation does not support using wildcards (*) in an action name.

pub fn get_action_names(&self) -> &Option<Vec<String>>

A list of names of API operations to evaluate in the simulation. Each operation is evaluated against each resource. Each operation must include the service identifier, such as iam:CreateUser. This operation does not support using wildcards (*) in an action name.

pub fn resource_arns(self, input: impl Into<String>) -> Self

Appends an item to resource_arns.

To override the contents of this collection use set_resource_arns.

A list of ARNs of Amazon Web Services resources to include in the simulation. If this parameter is not provided, then the value defaults to * (all resources). Each API in the ActionNames parameter is evaluated for each resource in this list. The simulation determines the access result (allowed or denied) of each combination and reports it in the response. You can simulate resources that don't exist in your account.

The simulation does not automatically retrieve policies for the specified resources. If you want to include a resource policy in the simulation, then you must include the policy as a string in the ResourcePolicy parameter.

If you include a ResourcePolicy, then it must be applicable to all of the resources included in the simulation or you receive an invalid input error.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

Simulation of resource-based policies isn't supported for IAM roles.

pub fn set_resource_arns(self, input: Option<Vec<String>>) -> Self

A list of ARNs of Amazon Web Services resources to include in the simulation. If this parameter is not provided, then the value defaults to * (all resources). Each API in the ActionNames parameter is evaluated for each resource in this list. The simulation determines the access result (allowed or denied) of each combination and reports it in the response. You can simulate resources that don't exist in your account.

The simulation does not automatically retrieve policies for the specified resources. If you want to include a resource policy in the simulation, then you must include the policy as a string in the ResourcePolicy parameter.

If you include a ResourcePolicy, then it must be applicable to all of the resources included in the simulation or you receive an invalid input error.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

Simulation of resource-based policies isn't supported for IAM roles.

pub fn get_resource_arns(&self) -> &Option<Vec<String>>

A list of ARNs of Amazon Web Services resources to include in the simulation. If this parameter is not provided, then the value defaults to * (all resources). Each API in the ActionNames parameter is evaluated for each resource in this list. The simulation determines the access result (allowed or denied) of each combination and reports it in the response. You can simulate resources that don't exist in your account.

The simulation does not automatically retrieve policies for the specified resources. If you want to include a resource policy in the simulation, then you must include the policy as a string in the ResourcePolicy parameter.

If you include a ResourcePolicy, then it must be applicable to all of the resources included in the simulation or you receive an invalid input error.

For more information about ARNs, see Amazon Resource Names (ARNs) in the Amazon Web Services General Reference.

Simulation of resource-based policies isn't supported for IAM roles.

pub fn resource_policy(self, input: impl Into<String>) -> Self

A resource-based policy to include in the simulation provided as a string. Each resource in the simulation is treated as if it had this policy attached. You can include only one resource-based policy in a simulation.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

Simulation of resource-based policies isn't supported for IAM roles.

pub fn set_resource_policy(self, input: Option<String>) -> Self

A resource-based policy to include in the simulation provided as a string. Each resource in the simulation is treated as if it had this policy attached. You can include only one resource-based policy in a simulation.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

Simulation of resource-based policies isn't supported for IAM roles.

pub fn get_resource_policy(&self) -> &Option<String>

A resource-based policy to include in the simulation provided as a string. Each resource in the simulation is treated as if it had this policy attached. You can include only one resource-based policy in a simulation.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

Simulation of resource-based policies isn't supported for IAM roles.

pub fn resource_owner(self, input: impl Into<String>) -> Self

An ARN representing the Amazon Web Services account ID that specifies the owner of any simulated resource that does not identify its owner in the resource ARN. Examples of resource ARNs include an S3 bucket or object. If ResourceOwner is specified, it is also used as the account owner of any ResourcePolicy included in the simulation. If the ResourceOwner parameter is not specified, then the owner of the resources and the resource policy defaults to the account of the identity provided in CallerArn. This parameter is required only if you specify a resource-based policy and account that owns the resource is different from the account that owns the simulated calling user CallerArn.

The ARN for an account uses the following syntax: arn:aws:iam::AWS-account-ID:root. For example, to represent the account with the 112233445566 ID, use the following ARN: arn:aws:iam::112233445566-ID:root.

pub fn set_resource_owner(self, input: Option<String>) -> Self

An ARN representing the Amazon Web Services account ID that specifies the owner of any simulated resource that does not identify its owner in the resource ARN. Examples of resource ARNs include an S3 bucket or object. If ResourceOwner is specified, it is also used as the account owner of any ResourcePolicy included in the simulation. If the ResourceOwner parameter is not specified, then the owner of the resources and the resource policy defaults to the account of the identity provided in CallerArn. This parameter is required only if you specify a resource-based policy and account that owns the resource is different from the account that owns the simulated calling user CallerArn.

The ARN for an account uses the following syntax: arn:aws:iam::AWS-account-ID:root. For example, to represent the account with the 112233445566 ID, use the following ARN: arn:aws:iam::112233445566-ID:root.

pub fn get_resource_owner(&self) -> &Option<String>

An ARN representing the Amazon Web Services account ID that specifies the owner of any simulated resource that does not identify its owner in the resource ARN. Examples of resource ARNs include an S3 bucket or object. If ResourceOwner is specified, it is also used as the account owner of any ResourcePolicy included in the simulation. If the ResourceOwner parameter is not specified, then the owner of the resources and the resource policy defaults to the account of the identity provided in CallerArn. This parameter is required only if you specify a resource-based policy and account that owns the resource is different from the account that owns the simulated calling user CallerArn.

The ARN for an account uses the following syntax: arn:aws:iam::AWS-account-ID:root. For example, to represent the account with the 112233445566 ID, use the following ARN: arn:aws:iam::112233445566-ID:root.

pub fn caller_arn(self, input: impl Into<String>) -> Self

The ARN of the IAM user that you want to use as the simulated caller of the API operations. CallerArn is required if you include a ResourcePolicy so that the policy's Principal element has a value to use in evaluating the policy.

You can specify only the ARN of an IAM user. You cannot specify the ARN of an assumed role, federated user, or a service principal.

pub fn set_caller_arn(self, input: Option<String>) -> Self

The ARN of the IAM user that you want to use as the simulated caller of the API operations. CallerArn is required if you include a ResourcePolicy so that the policy's Principal element has a value to use in evaluating the policy.

You can specify only the ARN of an IAM user. You cannot specify the ARN of an assumed role, federated user, or a service principal.

pub fn get_caller_arn(&self) -> &Option<String>

The ARN of the IAM user that you want to use as the simulated caller of the API operations. CallerArn is required if you include a ResourcePolicy so that the policy's Principal element has a value to use in evaluating the policy.

You can specify only the ARN of an IAM user. You cannot specify the ARN of an assumed role, federated user, or a service principal.

pub fn context_entries(self, input: ContextEntry) -> Self

Appends an item to context_entries.

To override the contents of this collection use set_context_entries.

A list of context keys and corresponding values for the simulation to use. Whenever a context key is evaluated in one of the simulated IAM permissions policies, the corresponding value is supplied.

pub fn set_context_entries(self, input: Option<Vec<ContextEntry>>) -> Self

A list of context keys and corresponding values for the simulation to use. Whenever a context key is evaluated in one of the simulated IAM permissions policies, the corresponding value is supplied.

pub fn get_context_entries(&self) -> &Option<Vec<ContextEntry>>

A list of context keys and corresponding values for the simulation to use. Whenever a context key is evaluated in one of the simulated IAM permissions policies, the corresponding value is supplied.

pub fn resource_handling_option(self, input: impl Into<String>) -> Self

Specifies the type of simulation to run. Different API operations that support resource-based policies require different combinations of resources. By specifying the type of simulation to run, you enable the policy simulator to enforce the presence of the required resources to ensure reliable simulation results. If your simulation does not match one of the following scenarios, then you can omit this parameter. The following list shows each of the supported scenario values and the resources that you must define to run the simulation.

Each of the Amazon EC2 scenarios requires that you specify instance, image, and security group resources. If your scenario includes an EBS volume, then you must specify that volume as a resource. If the Amazon EC2 scenario includes VPC, then you must supply the network interface resource. If it includes an IP subnet, then you must specify the subnet resource. For more information on the Amazon EC2 scenario options, see Supported platforms in the Amazon EC2 User Guide.

• EC2-VPC-InstanceStore

  instance, image, security group, network interface

• EC2-VPC-InstanceStore-Subnet

  instance, image, security group, network interface, subnet

• EC2-VPC-EBS

  instance, image, security group, network interface, volume

• EC2-VPC-EBS-Subnet

  instance, image, security group, network interface, subnet, volume

pub fn set_resource_handling_option(self, input: Option<String>) -> Self

Specifies the type of simulation to run. Different API operations that support resource-based policies require different combinations of resources. By specifying the type of simulation to run, you enable the policy simulator to enforce the presence of the required resources to ensure reliable simulation results. If your simulation does not match one of the following scenarios, then you can omit this parameter. The following list shows each of the supported scenario values and the resources that you must define to run the simulation.

Each of the Amazon EC2 scenarios requires that you specify instance, image, and security group resources. If your scenario includes an EBS volume, then you must specify that volume as a resource. If the Amazon EC2 scenario includes VPC, then you must supply the network interface resource. If it includes an IP subnet, then you must specify the subnet resource. For more information on the Amazon EC2 scenario options, see Supported platforms in the Amazon EC2 User Guide.

• EC2-VPC-InstanceStore

  instance, image, security group, network interface

• EC2-VPC-InstanceStore-Subnet

  instance, image, security group, network interface, subnet

• EC2-VPC-EBS

  instance, image, security group, network interface, volume

• EC2-VPC-EBS-Subnet

  instance, image, security group, network interface, subnet, volume

pub fn get_resource_handling_option(&self) -> &Option<String>

Specifies the type of simulation to run. Different API operations that support resource-based policies require different combinations of resources. By specifying the type of simulation to run, you enable the policy simulator to enforce the presence of the required resources to ensure reliable simulation results. If your simulation does not match one of the following scenarios, then you can omit this parameter. The following list shows each of the supported scenario values and the resources that you must define to run the simulation.

Each of the Amazon EC2 scenarios requires that you specify instance, image, and security group resources. If your scenario includes an EBS volume, then you must specify that volume as a resource. If the Amazon EC2 scenario includes VPC, then you must supply the network interface resource. If it includes an IP subnet, then you must specify the subnet resource. For more information on the Amazon EC2 scenario options, see Supported platforms in the Amazon EC2 User Guide.

• EC2-VPC-InstanceStore

  instance, image, security group, network interface

• EC2-VPC-InstanceStore-Subnet

  instance, image, security group, network interface, subnet

• EC2-VPC-EBS

  instance, image, security group, network interface, volume

• EC2-VPC-EBS-Subnet

  instance, image, security group, network interface, subnet, volume

pub fn max_items(self, input: i32) -> Self

Use this only when paginating results to indicate the maximum number of items you want in the response. If additional items exist beyond the maximum you specify, the IsTruncated response element is true.

If you do not include this parameter, the number of items defaults to 100. Note that IAM might return fewer results, even when there are more results available. In that case, the IsTruncated response element returns true, and Marker contains a value to include in the subsequent call that tells the service where to continue from.

pub fn set_max_items(self, input: Option<i32>) -> Self

Use this only when paginating results to indicate the maximum number of items you want in the response. If additional items exist beyond the maximum you specify, the IsTruncated response element is true.

If you do not include this parameter, the number of items defaults to 100. Note that IAM might return fewer results, even when there are more results available. In that case, the IsTruncated response element returns true, and Marker contains a value to include in the subsequent call that tells the service where to continue from.

pub fn get_max_items(&self) -> &Option<i32>

Use this only when paginating results to indicate the maximum number of items you want in the response. If additional items exist beyond the maximum you specify, the IsTruncated response element is true.

If you do not include this parameter, the number of items defaults to 100. Note that IAM might return fewer results, even when there are more results available. In that case, the IsTruncated response element returns true, and Marker contains a value to include in the subsequent call that tells the service where to continue from.

pub fn marker(self, input: impl Into<String>) -> Self

Use this parameter only when paginating results and only after you receive a response indicating that the results are truncated. Set it to the value of the Marker element in the response that you received to indicate where the next call should start.

pub fn set_marker(self, input: Option<String>) -> Self

Use this parameter only when paginating results and only after you receive a response indicating that the results are truncated. Set it to the value of the Marker element in the response that you received to indicate where the next call should start.

pub fn get_marker(&self) -> &Option<String>

Use this parameter only when paginating results and only after you receive a response indicating that the results are truncated. Set it to the value of the Marker element in the response that you received to indicate where the next call should start.

pub fn build(self) -> Result<SimulateCustomPolicyInput, BuildError>

Consumes the builder and constructs a SimulateCustomPolicyInput.

impl SimulateCustomPolicyInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<SimulateCustomPolicyOutput, SdkError<SimulateCustomPolicyError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for SimulateCustomPolicyInputBuilder

fn clone(&self) -> SimulateCustomPolicyInputBuilder

Returns a duplicate of the value.

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SimulateCustomPolicyInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for SimulateCustomPolicyInputBuilder

fn default() -> SimulateCustomPolicyInputBuilder

Returns the “default value” for a type.

impl PartialEq for SimulateCustomPolicyInputBuilder

fn eq(&self, other: &SimulateCustomPolicyInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for SimulateCustomPolicyInputBuilder