pub struct EnableMFADeviceFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to EnableMFADevice.
Enables the specified MFA device and associates it with the specified IAM user. When enabled, the MFA device is required for every subsequent login by the IAM user associated with the device.
Implementations§
Source§impl EnableMFADeviceFluentBuilder
impl EnableMFADeviceFluentBuilder
Sourcepub fn as_input(&self) -> &EnableMfaDeviceInputBuilder
pub fn as_input(&self) -> &EnableMfaDeviceInputBuilder
Access the EnableMFADevice as a reference.
Sourcepub async fn send(
self,
) -> Result<EnableMfaDeviceOutput, SdkError<EnableMFADeviceError, HttpResponse>>
pub async fn send( self, ) -> Result<EnableMfaDeviceOutput, SdkError<EnableMFADeviceError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<EnableMfaDeviceOutput, EnableMFADeviceError, Self>
pub fn customize( self, ) -> CustomizableOperation<EnableMfaDeviceOutput, EnableMFADeviceError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn user_name(self, input: impl Into<String>) -> Self
pub fn user_name(self, input: impl Into<String>) -> Self
The name of the IAM user for whom you want to enable the MFA device.
This parameter allows (through its regex pattern) a string of characters consisting of upper and lowercase alphanumeric characters with no spaces. You can also include any of the following characters: _+=,.@-
Sourcepub fn set_user_name(self, input: Option<String>) -> Self
pub fn set_user_name(self, input: Option<String>) -> Self
The name of the IAM user for whom you want to enable the MFA device.
This parameter allows (through its regex pattern) a string of characters consisting of upper and lowercase alphanumeric characters with no spaces. You can also include any of the following characters: _+=,.@-
Sourcepub fn get_user_name(&self) -> &Option<String>
pub fn get_user_name(&self) -> &Option<String>
The name of the IAM user for whom you want to enable the MFA device.
This parameter allows (through its regex pattern) a string of characters consisting of upper and lowercase alphanumeric characters with no spaces. You can also include any of the following characters: _+=,.@-
Sourcepub fn serial_number(self, input: impl Into<String>) -> Self
pub fn serial_number(self, input: impl Into<String>) -> Self
The serial number that uniquely identifies the MFA device. For virtual MFA devices, the serial number is the device ARN.
This parameter allows (through its regex pattern) a string of characters consisting of upper and lowercase alphanumeric characters with no spaces. You can also include any of the following characters: =,.@:/-
Sourcepub fn set_serial_number(self, input: Option<String>) -> Self
pub fn set_serial_number(self, input: Option<String>) -> Self
The serial number that uniquely identifies the MFA device. For virtual MFA devices, the serial number is the device ARN.
This parameter allows (through its regex pattern) a string of characters consisting of upper and lowercase alphanumeric characters with no spaces. You can also include any of the following characters: =,.@:/-
Sourcepub fn get_serial_number(&self) -> &Option<String>
pub fn get_serial_number(&self) -> &Option<String>
The serial number that uniquely identifies the MFA device. For virtual MFA devices, the serial number is the device ARN.
This parameter allows (through its regex pattern) a string of characters consisting of upper and lowercase alphanumeric characters with no spaces. You can also include any of the following characters: =,.@:/-
Sourcepub fn authentication_code1(self, input: impl Into<String>) -> Self
pub fn authentication_code1(self, input: impl Into<String>) -> Self
An authentication code emitted by the device.
The format for this parameter is a string of six digits.
Submit your request immediately after generating the authentication codes. If you generate the codes and then wait too long to submit the request, the MFA device successfully associates with the user but the MFA device becomes out of sync. This happens because time-based one-time passwords (TOTP) expire after a short period of time. If this happens, you can resync the device.
Sourcepub fn set_authentication_code1(self, input: Option<String>) -> Self
pub fn set_authentication_code1(self, input: Option<String>) -> Self
An authentication code emitted by the device.
The format for this parameter is a string of six digits.
Submit your request immediately after generating the authentication codes. If you generate the codes and then wait too long to submit the request, the MFA device successfully associates with the user but the MFA device becomes out of sync. This happens because time-based one-time passwords (TOTP) expire after a short period of time. If this happens, you can resync the device.
Sourcepub fn get_authentication_code1(&self) -> &Option<String>
pub fn get_authentication_code1(&self) -> &Option<String>
An authentication code emitted by the device.
The format for this parameter is a string of six digits.
Submit your request immediately after generating the authentication codes. If you generate the codes and then wait too long to submit the request, the MFA device successfully associates with the user but the MFA device becomes out of sync. This happens because time-based one-time passwords (TOTP) expire after a short period of time. If this happens, you can resync the device.
Sourcepub fn authentication_code2(self, input: impl Into<String>) -> Self
pub fn authentication_code2(self, input: impl Into<String>) -> Self
A subsequent authentication code emitted by the device.
The format for this parameter is a string of six digits.
Submit your request immediately after generating the authentication codes. If you generate the codes and then wait too long to submit the request, the MFA device successfully associates with the user but the MFA device becomes out of sync. This happens because time-based one-time passwords (TOTP) expire after a short period of time. If this happens, you can resync the device.
Sourcepub fn set_authentication_code2(self, input: Option<String>) -> Self
pub fn set_authentication_code2(self, input: Option<String>) -> Self
A subsequent authentication code emitted by the device.
The format for this parameter is a string of six digits.
Submit your request immediately after generating the authentication codes. If you generate the codes and then wait too long to submit the request, the MFA device successfully associates with the user but the MFA device becomes out of sync. This happens because time-based one-time passwords (TOTP) expire after a short period of time. If this happens, you can resync the device.
Sourcepub fn get_authentication_code2(&self) -> &Option<String>
pub fn get_authentication_code2(&self) -> &Option<String>
A subsequent authentication code emitted by the device.
The format for this parameter is a string of six digits.
Submit your request immediately after generating the authentication codes. If you generate the codes and then wait too long to submit the request, the MFA device successfully associates with the user but the MFA device becomes out of sync. This happens because time-based one-time passwords (TOTP) expire after a short period of time. If this happens, you can resync the device.
Trait Implementations§
Source§impl Clone for EnableMFADeviceFluentBuilder
impl Clone for EnableMFADeviceFluentBuilder
Source§fn clone(&self) -> EnableMFADeviceFluentBuilder
fn clone(&self) -> EnableMFADeviceFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for EnableMFADeviceFluentBuilder
impl !RefUnwindSafe for EnableMFADeviceFluentBuilder
impl Send for EnableMFADeviceFluentBuilder
impl Sync for EnableMFADeviceFluentBuilder
impl Unpin for EnableMFADeviceFluentBuilder
impl !UnwindSafe for EnableMFADeviceFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);