Struct CreatePolicyInputBuilder

#[non_exhaustive]
pub struct CreatePolicyInputBuilder { /* private fields */ }

A builder for CreatePolicyInput.

Implementations

impl CreatePolicyInputBuilder

pub fn policy_name(self, input: impl Into<String>) -> Self

The friendly name of the policy.

IAM user, group, role, and policy names must be unique within the account. Names are not distinguished by case. For example, you cannot create resources named both "MyResource" and "myresource".

This field is required.

pub fn set_policy_name(self, input: Option<String>) -> Self

The friendly name of the policy.

IAM user, group, role, and policy names must be unique within the account. Names are not distinguished by case. For example, you cannot create resources named both "MyResource" and "myresource".

pub fn get_policy_name(&self) -> &Option<String>

The friendly name of the policy.

IAM user, group, role, and policy names must be unique within the account. Names are not distinguished by case. For example, you cannot create resources named both "MyResource" and "myresource".

pub fn path(self, input: impl Into<String>) -> Self

The path for the policy.

For more information about paths, see IAM identifiers in the IAM User Guide.

This parameter is optional. If it is not included, it defaults to a slash (/).

This parameter allows (through its regex pattern) a string of characters consisting of either a forward slash (/) by itself or a string that must begin and end with forward slashes. In addition, it can contain any ASCII character from the ! (\u0021) through the DEL character (\u007F), including most punctuation characters, digits, and upper and lowercased letters.

You cannot use an asterisk (*) in the path name.

pub fn set_path(self, input: Option<String>) -> Self

The path for the policy.

For more information about paths, see IAM identifiers in the IAM User Guide.

This parameter is optional. If it is not included, it defaults to a slash (/).

This parameter allows (through its regex pattern) a string of characters consisting of either a forward slash (/) by itself or a string that must begin and end with forward slashes. In addition, it can contain any ASCII character from the ! (\u0021) through the DEL character (\u007F), including most punctuation characters, digits, and upper and lowercased letters.

You cannot use an asterisk (*) in the path name.

pub fn get_path(&self) -> &Option<String>

The path for the policy.

For more information about paths, see IAM identifiers in the IAM User Guide.

This parameter is optional. If it is not included, it defaults to a slash (/).

This parameter allows (through its regex pattern) a string of characters consisting of either a forward slash (/) by itself or a string that must begin and end with forward slashes. In addition, it can contain any ASCII character from the ! (\u0021) through the DEL character (\u007F), including most punctuation characters, digits, and upper and lowercased letters.

You cannot use an asterisk (*) in the path name.

pub fn policy_document(self, input: impl Into<String>) -> Self

The JSON policy document that you want to use as the content for the new policy.

You must provide policies in JSON format in IAM. However, for CloudFormation templates formatted in YAML, you can provide the policy in JSON or YAML format. CloudFormation always converts a YAML policy to JSON format before submitting it to IAM.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

To learn more about JSON policy grammar, see Grammar of the IAM JSON policy language in the IAM User Guide.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

This field is required.

pub fn set_policy_document(self, input: Option<String>) -> Self

The JSON policy document that you want to use as the content for the new policy.

You must provide policies in JSON format in IAM. However, for CloudFormation templates formatted in YAML, you can provide the policy in JSON or YAML format. CloudFormation always converts a YAML policy to JSON format before submitting it to IAM.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

To learn more about JSON policy grammar, see Grammar of the IAM JSON policy language in the IAM User Guide.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn get_policy_document(&self) -> &Option<String>

The JSON policy document that you want to use as the content for the new policy.

You must provide policies in JSON format in IAM. However, for CloudFormation templates formatted in YAML, you can provide the policy in JSON or YAML format. CloudFormation always converts a YAML policy to JSON format before submitting it to IAM.

The maximum length of the policy document that you can pass in this operation, including whitespace, is listed below. To view the maximum character counts of a managed policy with no whitespaces, see IAM and STS character quotas.

To learn more about JSON policy grammar, see Grammar of the IAM JSON policy language in the IAM User Guide.

The regex pattern used to validate this parameter is a string of characters consisting of the following:

• Any printable ASCII character ranging from the space character (\u0020) through the end of the ASCII character range

• The printable characters in the Basic Latin and Latin-1 Supplement character set (through \u00FF)

• The special characters tab (\u0009), line feed (\u000A), and carriage return (\u000D)

pub fn description(self, input: impl Into<String>) -> Self

A friendly description of the policy.

Typically used to store information about the permissions defined in the policy. For example, "Grants access to production DynamoDB tables."

The policy description is immutable. After a value is assigned, it cannot be changed.

pub fn set_description(self, input: Option<String>) -> Self

A friendly description of the policy.

Typically used to store information about the permissions defined in the policy. For example, "Grants access to production DynamoDB tables."

The policy description is immutable. After a value is assigned, it cannot be changed.

pub fn get_description(&self) -> &Option<String>

A friendly description of the policy.

Typically used to store information about the permissions defined in the policy. For example, "Grants access to production DynamoDB tables."

The policy description is immutable. After a value is assigned, it cannot be changed.

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

A list of tags that you want to attach to the new IAM customer managed policy. Each tag consists of a key name and an associated value. For more information about tagging, see Tagging IAM resources in the IAM User Guide.

If any one of the tags is invalid or if you exceed the allowed maximum number of tags, then the entire request fails and the resource is not created.

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

A list of tags that you want to attach to the new IAM customer managed policy. Each tag consists of a key name and an associated value. For more information about tagging, see Tagging IAM resources in the IAM User Guide.

If any one of the tags is invalid or if you exceed the allowed maximum number of tags, then the entire request fails and the resource is not created.

pub fn get_tags(&self) -> &Option<Vec<Tag>>

A list of tags that you want to attach to the new IAM customer managed policy. Each tag consists of a key name and an associated value. For more information about tagging, see Tagging IAM resources in the IAM User Guide.

If any one of the tags is invalid or if you exceed the allowed maximum number of tags, then the entire request fails and the resource is not created.

pub fn build(self) -> Result<CreatePolicyInput, BuildError>

Consumes the builder and constructs a CreatePolicyInput.

impl CreatePolicyInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<CreatePolicyOutput, SdkError<CreatePolicyError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for CreatePolicyInputBuilder

fn clone(&self) -> CreatePolicyInputBuilder

Returns a duplicate of the value.

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreatePolicyInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for CreatePolicyInputBuilder

fn default() -> CreatePolicyInputBuilder

Returns the “default value” for a type.

impl PartialEq for CreatePolicyInputBuilder

fn eq(&self, other: &CreatePolicyInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for CreatePolicyInputBuilder