pub struct SetSecurityTokenServicePreferencesFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to SetSecurityTokenServicePreferences.
Sets the specified version of the global endpoint token as the token version used for the Amazon Web Services account.
By default, Security Token Service (STS) is available as a global service, and all STS requests go to a single endpoint at https://sts.amazonaws.com. Amazon Web Services recommends using Regional STS endpoints to reduce latency, build in redundancy, and increase session token availability. For information about Regional endpoints for STS, see Security Token Service endpoints and quotas in the Amazon Web Services General Reference.
If you make an STS call to the global endpoint, the resulting session tokens might be valid in some Regions but not others. It depends on the version that is set in this operation. Version 1 tokens are valid only in Amazon Web Services Regions that are available by default. These tokens do not work in manually enabled Regions, such as Asia Pacific (Hong Kong). Version 2 tokens are valid in all Regions. However, version 2 tokens are longer and might affect systems where you temporarily store tokens. For information, see Activating and deactivating STS in an Amazon Web Services Region in the IAM User Guide.
To view the current session token version, see the GlobalEndpointTokenVersion entry in the response of the GetAccountSummary operation.
Implementations§
Source§impl SetSecurityTokenServicePreferencesFluentBuilder
impl SetSecurityTokenServicePreferencesFluentBuilder
Sourcepub fn as_input(&self) -> &SetSecurityTokenServicePreferencesInputBuilder
pub fn as_input(&self) -> &SetSecurityTokenServicePreferencesInputBuilder
Access the SetSecurityTokenServicePreferences as a reference.
Sourcepub async fn send(
self,
) -> Result<SetSecurityTokenServicePreferencesOutput, SdkError<SetSecurityTokenServicePreferencesError, HttpResponse>>
pub async fn send( self, ) -> Result<SetSecurityTokenServicePreferencesOutput, SdkError<SetSecurityTokenServicePreferencesError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<SetSecurityTokenServicePreferencesOutput, SetSecurityTokenServicePreferencesError, Self>
pub fn customize( self, ) -> CustomizableOperation<SetSecurityTokenServicePreferencesOutput, SetSecurityTokenServicePreferencesError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn global_endpoint_token_version(
self,
input: GlobalEndpointTokenVersion,
) -> Self
pub fn global_endpoint_token_version( self, input: GlobalEndpointTokenVersion, ) -> Self
The version of the global endpoint token. Version 1 tokens are valid only in Amazon Web Services Regions that are available by default. These tokens do not work in manually enabled Regions, such as Asia Pacific (Hong Kong). Version 2 tokens are valid in all Regions. However, version 2 tokens are longer and might affect systems where you temporarily store tokens.
For information, see Activating and deactivating STS in an Amazon Web Services Region in the IAM User Guide.
Sourcepub fn set_global_endpoint_token_version(
self,
input: Option<GlobalEndpointTokenVersion>,
) -> Self
pub fn set_global_endpoint_token_version( self, input: Option<GlobalEndpointTokenVersion>, ) -> Self
The version of the global endpoint token. Version 1 tokens are valid only in Amazon Web Services Regions that are available by default. These tokens do not work in manually enabled Regions, such as Asia Pacific (Hong Kong). Version 2 tokens are valid in all Regions. However, version 2 tokens are longer and might affect systems where you temporarily store tokens.
For information, see Activating and deactivating STS in an Amazon Web Services Region in the IAM User Guide.
Sourcepub fn get_global_endpoint_token_version(
&self,
) -> &Option<GlobalEndpointTokenVersion>
pub fn get_global_endpoint_token_version( &self, ) -> &Option<GlobalEndpointTokenVersion>
The version of the global endpoint token. Version 1 tokens are valid only in Amazon Web Services Regions that are available by default. These tokens do not work in manually enabled Regions, such as Asia Pacific (Hong Kong). Version 2 tokens are valid in all Regions. However, version 2 tokens are longer and might affect systems where you temporarily store tokens.
For information, see Activating and deactivating STS in an Amazon Web Services Region in the IAM User Guide.
Trait Implementations§
Source§impl Clone for SetSecurityTokenServicePreferencesFluentBuilder
impl Clone for SetSecurityTokenServicePreferencesFluentBuilder
Source§fn clone(&self) -> SetSecurityTokenServicePreferencesFluentBuilder
fn clone(&self) -> SetSecurityTokenServicePreferencesFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for SetSecurityTokenServicePreferencesFluentBuilder
impl !RefUnwindSafe for SetSecurityTokenServicePreferencesFluentBuilder
impl Send for SetSecurityTokenServicePreferencesFluentBuilder
impl Sync for SetSecurityTokenServicePreferencesFluentBuilder
impl Unpin for SetSecurityTokenServicePreferencesFluentBuilder
impl !UnwindSafe for SetSecurityTokenServicePreferencesFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);